PDA

View Full Version : Tamiya 502x build help -- Lee Martin


cs8sz
23-12-2010, 04:48 PM
Hi Guys,

Me and Dad just ordered new 502xs and I have been reading Lee Martin's build guide from TRF Racing he mentions the following upgrades to the standard kit:

Aluminium rear hubs
Drive Shafts
Gold Shock bodies
Blue Screws
Shock stand offs (not sure what these are?)

My Question is what is the difference between these parts and the standard kit parts, in particular I can't find part numbers for these parts

Thanks for the help

Chris

muratti
23-12-2010, 05:23 PM
Gold Shock bodies:

42132 HL Cylinder for Aeration dampers (Front, 2pcs) x1
42133 HL Cylinder for Aeration dampers (Rear, 2pcs) x1


Alumninium Rear Hubs:

54246 TRF201 Aluminium Rear Upright (1.0)
or the 0.5 or 0 degree

Driveshafts:

54118 WO Universal Shaft Set Front (2pcs) x1
54119 WO Universal Shaft Set Rear (2pcs) x1

Shock stand offs ( maybe he means the shock bushings made from aluminium instead of plastic:
54205 DB01 Aluminium Bushing (2pcs) x2


The Rear Uprights make the rear stiffer and doens“t create oversteer. The WO Universal Shafts operate slightly better at big angles, the gold shock bodies make the pistons move easier.

cs8sz
24-12-2010, 03:00 PM
Thank you very much that was extermley helpful I have now placed more orders.

On a side point but related does anyone know where to get the front shock tower listed part number (14304113) can't be found on any websites for the 502x. Also the diff gears (19334140) also don't exist. i would really like some spares of these just encase.

Thanks a million.

Chris

DaveG28
24-12-2010, 03:18 PM
I don't think anywhere has the shock towers in stock, although champ might do, they had some in on a special order for me, but may have got more! None of the 7 digit parts are available anywhere yet as far as I know!

The diff gears have been released as an option part, it's 54262 I think?

AndrewCaunt
24-12-2010, 06:39 PM
I ordered the diff gears with Ashley 502 hope its here for the petit :o

Airwave
28-12-2010, 12:19 AM
Is that this parts you are looking for?

http://www.rcmart.com/catalog/rc-product-tamiya-51438-trf502x-ball-differential-gear-p-32871.html

bdrmbully
28-01-2011, 10:02 PM
i broke my front bulkhead in the 1st two minutes of testing. now im screwed, got a 500$ car thats just sitting. where to get parts??? tamiya canada doesnt even have spares.

Jan Larsen
28-01-2011, 10:05 PM
How the hell did you break that?! I've bend one in the hardest crash ever (wheel tangle on a straight, right into a solid building), but never actually broken one. Your best bet is the wanted section here or go searching in Hong Kong based online shops.

Jamie.T
28-01-2011, 10:28 PM
I should have a few sets in stock in approx 2-3 weeks. But they're not cheap, I'd hazard a guess at £25 for the complete tree of A parts.

If you haven't found somy by then, let me know and I'll sort you out with a set.

bdrmbully
29-01-2011, 01:04 AM
I should have a few sets in stock in approx 2-3 weeks. But they're not cheap, I'd hazard a guess at £25 for the complete tree of A parts.

If you haven't found somy by then, let me know and I'll sort you out with a set.
got the part tree from much hobby (30 cdn)who got it from a canadian team driver . big shout out to them for hooking me up. thanks alot brothahs!!

bdrmbully
03-02-2011, 06:26 PM
i found no matter where you position the shocks, the ride hieght is still to high. i had some blue rb5 shocks for spares and used them on the rear now it sits alot better.

Jamie.T
03-02-2011, 07:15 PM
If you read Lee martins ongoing report you will see that he cut 1-2 coils of the rear springs. I also did the same to my springs and the car now sits perfectly.

sime46
03-02-2011, 10:00 PM
Me too. Had to do the same on the 511 too. Loads better when cut down.

bdrmbully
03-02-2011, 11:53 PM
i read that. i just did not like the idea of hacking a perfectly good pair of springs and once you cut them they dont have that perfect circle on the bottom any more which i do not like. so the rb5 springs are the equivelant of 2 coils removed and they are blue which also make the car look better lol

Rich D
04-02-2011, 12:06 AM
Springs operate just fine with a coil cut, Lee won the European Champs with cut springs so I'm sure they will suit your buggy ;)

We all put the cut end on the collar.

sime46
04-02-2011, 07:32 AM
Springs operate just fine with a coil cut, Lee won the European Champs with cut springs so I'm sure they will suit your buggy ;)

We all put the cut end on the collar.
Always cut the top end, ie leave the end with the coloured dot so you know what rate they are. ;)

bdrmbully
16-02-2011, 12:44 AM
drove the car on a small indoor track on turf and it had one jump and man even without weights i find it to be a nice level jumper.

Jan Larsen
16-02-2011, 01:59 PM
The car is an excellent jumper and easy to control in the air. One of the comments I recieve when on track is that people are amazed at how well it jumps and lands. I won one of our nationals by OVERjumping one of the opponents. It was a massive quadruple that I only took in practice to see if I could do it, otherwise I double-doubled it. I expected the landing to be severe and there was quite a bit of chassis slap, but, crucially, it didnt bounce back up again, allowing me to drive straight on.
The CAT SX I had before the 511 was nowhere near able to do the same thing.
Ironically I also lost the championship by mere inches on a similar jump later in the season, but thats another story... :)

bdrmbully
22-03-2011, 12:56 AM
thats all the input and we have such a nice vehicle?? no more mods no more parts , no more hop ups? got me the rear hubs and threw some 3 racing blocks and spindles up front. gonna see how she handles in two weeks at motorcity in oshawa. in the mean time i got me a the new losi ten sct to play with ?:@)

msxmre
22-03-2011, 02:25 AM
I ran mine on sunday with Lees revised steering set up and after being a bit dubious as to if it would work, i was totally gobsmacked at the difference it made to the steering of the car. So fast in and out of the corners and as has been previously stated this car jumps superbly and with ease. This is problably the best handling car i've ran.
Scotty....