View Full Version : Ghea pistons
Robocop
29-12-2010, 10:54 PM
Hi
Which ghea pistons fit the cougar as i cant see them listed,also dies anyone sell them in the uk?
Is the alloy gearbox worth it does it make every thing last longer?
Big G
29-12-2010, 11:25 PM
Hi
Which ghea pistons fit the cougar as i cant see them listed,also dies anyone sell them in the uk?
http://www.p-dubracing.co.uk/page_1269104743868.html
Robocop
30-12-2010, 12:33 AM
Thanks
gazhillAE
30-12-2010, 07:00 PM
Thanks
Indoors
4 front both cars
6 rear both cars
Outdoors
4 front both cars
5 or 6 rear both cars try both
;0)
Hi gazhillAE,you say 5 or 6 rear try both,what difference would it make and would the oil and springs need to be changed to,or is it the 5 hole out door gives the same as changing oil and springs when out door?
Cockerill
31-12-2010, 05:34 PM
My starting setup pretty much everywhere, indoors and out, is:
2wd: 4.5F/4 Hole/35wt and 2.0R/5 Hole/30wt
4wd: 3.5F/4 Hole/35wt and 2.0R/5 Hole/30wt
Robocop
31-12-2010, 05:44 PM
Thanks
But would that be with the taper down?
Cockerill
31-12-2010, 06:21 PM
Thanks
But would that be with the taper down?
Yeah
Dazzler
31-12-2010, 06:27 PM
Is there anywhere where else you can get them? Pistons seem reasonably priced, but on three pairs postage was 1.50 a pair, regardless of how many pairs you buy. Seemed a bit steep.
mikeyscott
31-12-2010, 07:57 PM
My starting setup pretty much everywhere, indoors and out, is:
2wd: 4.5F/4 Hole/35wt and 2.0R/5 Hole/30wt
4wd: 3.5F/4 Hole/35wt and 2.0R/5 Hole/30wt
Thought you'd run Schumacher pistons for more pack indoors
Cockerill
31-12-2010, 08:01 PM
TBH, I ran tapered pistons indoors because they were still in the shocks from outdoors, and the car was fine. They are probably not needed indoors as there aren't normally any small bumps/ruts where they offer an advantage.
mikeyscott
31-12-2010, 08:04 PM
That was my logic too. Ghea were 'ok' at taplow but wish I'd tried the Schumacher rounded pistons. Going to start with them at Petit. Having said that you can drive, I can't lol..
Rather than start a new thread Ill jump in on this one. :)
Im guessing with the ghea pistons the "rounded side" must be facing down so that when positive pressure is applyed it is the "flat side" that is compressing the oil.
Im nearly confusing myself here!
Thanks
Wraggy
08-01-2011, 05:24 PM
Is there anywhere where else you can get them? Pistons seem reasonably priced, but on three pairs postage was 1.50 a pair, regardless of how many pairs you buy. Seemed a bit steep.
Postage pricing has now been adjusted slightly so should be more appealing..
Dazzler
08-01-2011, 05:50 PM
Postage pricing has now been adjusted slightly so should be more appealing..
Nice one - Looks a lot more appealing! :thumbsup:
ikey ji
09-01-2011, 07:49 AM
Postage pricing has now been adjusted slightly so should be more appealing..
Yep, so i bought some...:p
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.