Bradders B44 setup from worksop

[Rob_B]

Anychance of you posting up your final setup from worksop yesterday please so i can compare to what i was running. Thanks

[Bradders]

Nae worries. Here it is.... You shouldn't need to change it much for any track you go on. It works pretty well everywhere :thumbsup: Maybe just play around with added weight occasionally.

[Rob_B]

Cheers for that, When you say you run carbon rear wishbones are these the ones from the b4 ASC9583. Also when you say 1672 g race weight does this include the shell? Thanks

[bondy]

thats the setup I used yesterday to great effect... First time a worksop with the B44.1 4th in the B final... Luverly car

[markwilliamson2001]

Interesting to see you are now running SP electrics over Nosram Paul!
How do you feel about them, I use them, and for the cost, they are excellent..

[Bradders]

Rob_B: The 1672g race weight is body included, basically what the car weighs when it's put on the track.
The wishbones are AS9583 yup! They're the carbon B4 ones. I use them because they flex less, one of the advantages being that you won't have driveshafts popping out under heavy loads etc. You will need to drill a hole in the front of the arm and fix a ballstud on there to mount the roll-bar though.

Mark: Yeah, i've moved to SP now and loving the gear so far. It was the first time out with it at the weekend and it felt really good. Happy with it all :)

[Rob_B]

Cheers paul. do you run the alloy caster blocks abd the alloy rear hubs?
Also brass tray and straps thanks

[NitroArgi]

Hello Paul

This is Argi from Greece...checked out your setup, are you still using the carbon steering rack?

[Bradders]

Rob: I run the standard plastic caster blocks and standard rear hubs (unless I run more toe-in obviously.) At Worksop I ran the carbon lipo tray and centrepiece. I don't tend to use the brass straps. If I am adding weight I start with the brass centre weights, and then the outer tray if more is needed.

Argi: Good to hear from you again dude. I'm using the standard plastic rack again now. I found that carbon one wears relatively fast so needs replacing too often.