PDA

View Full Version : First time out with my DEX410R


TonyM
16-01-2011, 05:31 PM
I had the first run with my DEX410R this weekend. When it was working it was super to drive, but I had two issues:-

1. My servo saver broke. I had set the nut at 1.4mm as advised in previous threads. It would seem that this is a common problem - is there an alternative which can be fitted?

2. The small M3x6 screw which goes into the end of the slipper assembly came loose and I ended up with a 2WD car. This happened first at Leyland on Friday and I thread locked the screw after that, but it happened again at Formby today. Have any others had this problem?

steve73
16-01-2011, 06:08 PM
What brake exactly?
Maybe this is the solution: LINK
(http://www.tresrey.com/tresrey/products/tytd036_eng.html)

That was also my problem.
And i want to change the servo sayer today at it was not possible for me to unscrew it so now is also Servosaver Shaft and the servosaver nut defect.....:cry:

TonyM
16-01-2011, 06:11 PM
Thanks Steve I'll order one of those.

captainlip
16-01-2011, 06:11 PM
how did it snap? was it on impact or when bouncing on all wheels?

TonyM
16-01-2011, 06:20 PM
how did it snap? was it on impact or when bouncing on all wheels?

I think the problem was caused after it suddenly became a 2WD car and when trying to make a largish jump there was little power and I hit the second jump quite hard (put a hole in the plywood, much to the distain of the guy that built it :eh?:). I retired and after fixing the slipper screw issue the next time I raced I only managed a few laps before the steering went. I think hitting the big jump must have cracked it.

captainlip
16-01-2011, 06:26 PM
do you have any pics of the failed part? how on earth did it become 2wd :eh?:

TonyM
16-01-2011, 06:33 PM
do you have any pics of the failed part? how on earth did it become 2wd :eh?:

No pictures I just binned it.

It became 2WD because the screw came out of the rear end of the Slipper Assembly. The pin dropped out and hey presto no rear drive.

Rob_B
16-01-2011, 07:20 PM
Tony thers someone selling one NIP in the for sale section page 2,3 i think

TonyM
16-01-2011, 08:20 PM
Thanks Rob - unfortunately sold.