PDA

View Full Version : Which wheels to use on a DEX410


Bozzspeed
18-01-2011, 12:13 PM
I have just finished building my first DEX410 after being a loyal AE user for years.

What wheels can you use on the DEX410? And do they change the track width on the car.

AmiSMB
18-01-2011, 01:03 PM
I use AE and Losi wheels as I have so many I do not really want to have to buy all new Durango wheels. They do reduce the width at the front by 2mm but I can live with that.

Hulk
18-01-2011, 01:06 PM
Just use Durango wheels! simples :thumbsup:

Only joking mate, most wheels fit to be honest. Ive used Associated, Losi and Tamiya wheels on test days. They prob do give a very slightly different track width, but the difference is so small you wouldnt notice it on the track.

Craig

Cooper
18-01-2011, 01:37 PM
white ! :thumbsup:

fastinfastout
18-01-2011, 01:54 PM
I use AE and Losi wheels as I have so many I do not really want to have to buy all new Durango wheels. They do reduce the width at the front by 2mm but I can live with that.
I didnt know that, maybe thats why I feel the durango is twitchy. Might have to finally use my durango wheels that I have never touched.

Big G
18-01-2011, 02:20 PM
I use Jconcept rulux wheels since I have loads of them with tyres on.

The front width is reduced with the durango wheels or without?

AmiSMB
18-01-2011, 02:58 PM
I think the rear width is the same no matter what wheel you use but on the front with Losi or AE the width is reduced. I did try with the old plastic front hubs to use some spacers behind some AE/HB hexes and then mount the wheel but this allowed the front hubs to fail. I may try this again as I now have the Tresrey aluminium front hubs and you may want to try this with the newer 2010 spec Durango plastic hubs that have the different sized bearings.

Holeshot
18-01-2011, 03:32 PM
I just use durango as they are also nice and cheap. With the larger rpm ball cups on, when i use ae wheels and turn sharp the inside wheel scraps the ballcup. Will post pic today to show you.

JohnM
18-01-2011, 04:43 PM
I use Jconcept rulux wheels since I have loads of them with tyres on.

The front width is reduced with the durango wheels or without?

The width is reduced when not using the Durango wheels, I found the Rulux wheels made it feel horrible off road, on-road, not so much of a problem.