Hobbywing help

[Rebelrc]

Hello :)
Does any one know if you can install the HW extreme stock software into the 120a v2.1 speedo...so as to have boost and turbo options etc

as i have bought 2 speedos and am not sure if they are what i wanted:cry:
cheers

[rc_penguin]

Yeah Scott you can :) That's what Mike's been using for the past few months on his 120a Hobbywing, ive also been using the same software on my Speed Passion GT2.0 :)

[Rebelrc]

Many thanks Will
I will see you wednesday:)

[RogerM]

You would be better off with the 528-MOD software, still the timing / boost options but curves more suited to a low wind motor. It's what I am using on my ESCs and so far so good.

[MHeadling]

Hey Scott, I am running this on 13.5 as well as lots of others at FORCC,

Here is a link:

http://www.speedpassion.net/en/productDetails.asp?p=EXT98802LPFSCB&c=ESC

Go to downloads tab and 01212 stock at the top, loadsa power! :lol:

[Chequered Flag Racing]

couple of links you may want to read up on

http://www.rctech.net/forum/electric-road/393690-new-hobbywing-stock-supercharged-software.html

http://www.rctech.net/forum/australian-racing/399168-hobbywing-tech-support-info.html

[spud31]

Dude if u can wait till wed i will update them with the newer software than 528, its much smoother an dosent get motors so hot.

[Rebelrc]

Cheers Richard
They are not even installed yet as I am busy doing an awkward en-suite ..... Boo!
But sounds good ,cheers for your wisdom, see you wednesday:thumbsup:

[hashiriya]

Hey Scott, I am running this on 13.5 as well as lots of others at FORCC,

Here is a link:

http://www.speedpassion.net/en/productDetails.asp?p=EXT98802LPFSCB&c=ESC

Go to downloads tab and 01212 stock at the top, loadsa power! :lol:

I use a Speedpassion GT2.1 pro stock adn I've just downloaded the 1.35 software and 01212 profile.

I've just done the update but the tabs don't seem to display the correct numbers as they appear in the manual. The parameters still seem to show the same numbers as the 528 software.

Has anyone else suffered this at all?

[dale]

The upgrade procedure is:

Install the software on the PC
Upgrade the program box twice
Upgrade the ESC twice

I'm not 100% sure if the upgrading twice is still necessary, but there used to be issues if you only did it once.

Give it a try.