View Full Version : shock oil w help
rc10fan
11-03-2011, 09:01 PM
Just got my 502 and was reading lee's set-up sheets he mentions 400w shock oil am i reading that right that seems really hi for shocks i always thought it was in double figures like 30 or 35 etc ?
thanks
mattb
11-03-2011, 09:08 PM
thats probably tamiyas equivalent to 40w oil rob,kyosho do something similar their 350w is 35w.
rc10fan
11-03-2011, 09:11 PM
cheers matt. ummm what you doing in here lol are you a secret tamiya fan lol. was down at the track today starting to look something like a track looks smaller but hard to tell yet.
dimblum
12-03-2011, 12:06 AM
The "400" oil Tamiya is referring to is rated in 'cSt' or centistokes. It is a measurement of viscosity instead of weight.. Unfortunately cSt does not directly translate to a weight equivalent.. In other words, 400cST oil is not equal to 40WT oil. It is actually just a tad over 30WT.
Here is a pretty good chart posted by XRAY that gives you a more accurate comparison: http://www.rceasy.com/2008/01/10/xray-silicone-shock-oil-conversion-table/
Hope this helps.
rc10fan
12-03-2011, 10:36 AM
top man thanks for the help. now im going to have to change my oil again lol. oh well i need practice building shocks i always seem to do one a bit different to the other lol
mattybucks
12-03-2011, 11:02 AM
top man thanks for the help. now im going to have to change my oil again lol. oh well i need practice building shocks i always seem to do one a bit different to the other lol
Have a look at Lee Martin's tips on TRF racing.
http://www.trfracing.co.uk/page_1265187551237.html
Re oil weight, in my 511 I use Losi 35 in the front and 30 in the rear most of the time, sometimes if i'm feeling a little crazy i use 32.5 in the front and 27.5 in the rear.
rc10fan
12-03-2011, 08:17 PM
thanks for your help looked at lees thread and started mine :)
GRIFF55
12-03-2011, 08:23 PM
the oils lee used there were mr33 oils and these are measured in cst.
If you can find an old losi oil bottle, it has both cst and std weights marked on the front of it;)
Hope this helps
rc10fan
12-03-2011, 10:17 PM
just been reading through the confusing instructions for the general shock build and noticed that it shows to plastic spacers part code w2 and k2. now when i bought my car (second hand) it has the GHEA 2 hole tapered pistons but when i rebuilt them i couldnt find these plastic spacers in mine what are they for ?
http://i360.photobucket.com/albums/oo43/mclaurin08/instructiontrfhelp.jpg
thanks
Andyp
12-03-2011, 10:46 PM
If you can find an old losi oil bottle, it has both cst and std weights marked on the front of it;)
Associated bottles have both on the front of there's too !
rc10fan
12-03-2011, 10:50 PM
cool thanks
Fredrik Emilsson
13-03-2011, 12:06 AM
just been reading through the confusing instructions for the general shock build and noticed that it shows to plastic spacers part code w2 and k2. now when i bought my car (second hand) it has the GHEA 2 hole tapered pistons but when i rebuilt them i couldnt find these plastic spacers in mine what are they for ?
http://i360.photobucket.com/albums/oo43/mclaurin08/instructiontrfhelp.jpg
thanks
K2=Limiter to reduce droop
W2=Piston rod guide
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.