tony12795
16-03-2011, 01:32 PM
For Everyone getting a Losi 22
You will need a 2.0mm and a 2.5mm hex wrench and 5.5mm and 7.0mm nut drivers
Slipper spanner – it’s a 5mm nut wrench, Dynamite (DYN2802)
Tony
You will need a 2.0mm and a 2.5mm hex wrench and 5.5mm and 7.0mm nut drivers
Slipper spanner – it’s a 5mm nut wrench, Dynamite (DYN2802)
Tony