PDA

View Full Version : 22 - Ride height

coleman758
23-03-2011, 10:44 PM
My 22 is all built up now!
but it seems to be really high up. I'm wondering if there is too much re-bound in the shocks? can anyone give me an idea of there ride height (Track ready)
stegger
24-03-2011, 07:47 AM
Are all the electrics in it aswell as the lipo ? :woot:
coleman758
24-03-2011, 08:01 AM
Are all the electrics in it aswell as the lipo ? :woot:

Hey, Yes the car is ready to go. It just looks far too high.
reg
24-03-2011, 09:02 AM
you need to build the shocks with no rebound:thumbsup:
jaydits
24-03-2011, 09:59 AM
is there some sort of trick to build the shocks
i found it hard to match them perfectly with no rebound
kind of liked the old type of shocks
thanks
stegger
24-03-2011, 12:05 PM
is there some sort of trick to build the shocks
i found it hard to match them perfectly with no rebound
kind of liked the old type of shocks
thanks

For 0% rebound pull shaft out fully before putting cap on, if you want 50% rebound push shaft in halfway then put cap on etc etc. ;)
reg
24-03-2011, 12:16 PM
For 0* rebound pull shaft out fully before putting cap on, if you want 50* rebound push shaft in halfway then put cap on etc etc. ;)

doing it with the piston all the way out would be 100% rebound:thumbsup:
stegger
24-03-2011, 12:32 PM
doing it with the piston all the way out would be 100% rebound:thumbsup:
Yes with the shaft pushed right in. :woot:
coleman758
24-03-2011, 01:01 PM
I had the shaft all way out. Topped it up with oil. Put the diaphragm on then tightened it up.

If i put the shaft half way in, then top up then screw the cap on that should give me 50% rebound?
reg
24-03-2011, 01:33 PM
Yes with the shaft pushed right in. :woot:

that would be 0% rebound:confused:
reg
24-03-2011, 01:37 PM
I had the shaft all way out. Topped it up with oil. Put the diaphragm on then tightened it up.

If i put the shaft half way in, then top up then screw the cap on that should give me 50% rebound?

if the shock is built with the piston all the way out that is 100% as when you push the piston in it will push itself out all the way,

if the shock is built with the piston all the way in that is 0% as when you push the piston in it will stay there,

i dont mind being corrected if im wrong
coleman758
24-03-2011, 02:32 PM
if the shock is built with the piston all the way out that is 100% as when you push the piston in it will push itself out all the way,

if the shock is built with the piston all the way in that is 0% as when you push the piston in it will stay there,

i dont mind being corrected if im wrong

Thats what i was thinking?
Wacker 2
24-03-2011, 07:44 PM
if the shock is built with the piston all the way out that is 100% as when you push the piston in it will push itself out all the way,

if the shock is built with the piston all the way in that is 0% as when you push the piston in it will stay there,

i dont mind being corrected if im wrong

I'm with you on that too... I built mine with the shaft pushed all the way in to acheive as close to 0% rebound as I could!

:thumbsup:
shark
24-03-2011, 08:33 PM
I'm with you on that too... I built mine with the shaft pushed all the way in to acheive as close to 0% rebound as I could!

:thumbsup:Yep ;)
coleman758
24-03-2011, 09:20 PM
Ok guys! done that! and its much better thanks!
jaydits
24-03-2011, 09:31 PM
jep much better now
this weekend try to bet a feeling for them
thanks guys
stegger
25-03-2011, 07:42 AM
that would be 0% rebound:confused:

correct, sorry mate can't multi task i was doing something else at the same time.
reg
25-03-2011, 08:51 AM
correct, sorry mate can't multi task i was doing something else at the same time.


:woot::thumbsup: