PDA

View Full Version : BMAX II - Who knows the spec. ?

one-way
03-04-2011, 08:19 AM
Hello,

I would like to know if someone knows ths spec of the BMAX II ?

Thanks

Julien
Swalls
03-04-2011, 08:44 AM
Lipo chassis
New motor mount with wider gearing options
New shell

...............eeerrr think thats it really.
Si Coe
03-04-2011, 09:23 AM
AFAIK the Bmax II is delayed due to recent events in Japan, so the spec isn't really an issue at this stage, as it may change again before release.
Fatal1ty
03-04-2011, 11:08 AM
watch here ;)

http://www.teamyokomo.com/jpn/product/offroad/bmax4f11/b_max4f11.html
fastinfastout
03-04-2011, 02:44 PM
AFAIK the Bmax II is delayed due to recent events in Japan, so the spec isn't really an issue at this stage, as it may change again before release.
the cars are already out and ready for purchase
one-way
03-04-2011, 03:07 PM
Ok, we can see the spec on the yokomo web site. It seems the Bmax II has only the new shell compare to the Bmax I.
Si Coe
03-04-2011, 03:36 PM
Thats the base Bmax II, the new FT also has new driveshafts (which look to be the old driveshafts but with a massive C clip round them to hold the pin in), a new chassis (which is the same as the old chassis, but with the cell slots not cut out and a cut out under the motor instead) and a totally new motor mount.

The new motor mount does look good and I'll be wanting one of them. I'll only worry about the new chassis if the old one breaks or can't fit the new motor mount. I don't see the need for the new driveshafts as I've never lost the pins on the old ones, but captive pins are in....


Delivery was delayed, but only a few days it seems.
Fatal1ty
03-04-2011, 03:51 PM
Its delayed because of the earthquake. In switzerland around mid april... I've to wait :) Allready sold my "old" 4 race old Factory... and the tracks are ready! asdkonasd! :lol:
chokoboy
05-04-2011, 10:58 AM
Its delayed because of the earthquake. In switzerland around mid april... I've to wait :) Allready sold my "old" 4 race old Factory... and the tracks are ready! asdkonasd! :lol:

Sorry for going off-topic, but are u the same person as Adi who runs eseller.ch?
Fatal1ty
05-04-2011, 05:07 PM
No I'm not, but he's a good mate! ;) They call me "bami" :woot:
one-way
11-04-2011, 04:36 PM
In fact, i have just bought a Bmax FT (Argghh), i just want to upgrade it to a bmax FT II.
CODMAN
11-04-2011, 10:57 PM
In fact, i have just bought a Bmax FT (Argghh), i just want to upgrade it to a bmax FT II.

Why? Except for the motor mount which might make gearing easier, the new B-max has nothing over the 2010 FT version! Replace the parts as NEED arises: in other words breakage or difficulty gearing (for the motor mount).

Or if you really want to, just for bling reasons, go ahead and spend the cash...:thumbsup:
one-way
12-04-2011, 09:17 AM
CODMAN, you are so right, i know the II version and the first one are closed. If the simply bmax II version had the new improuvments, i would buy it to have the new parts and spare parts too ! Interesed with the motor mount and the chassis ! I am going to wait the spare parts !

Thanks