Hmmmmm I wonder what a Tardis 22 is ?

[tony12795]

Bet Griff knows !!!!

[mattybucks]

Does it look like a losi 22 on the outside, but there's enough room to put your electrics in on the inside?

[Chequered Flag Racing]

wonder if it'll make a showing at the next national?

[tony12795]

I think there maybe two...... :rolleyes:

[Chequered Flag Racing]

Pictures please :thumbsup:

[Funkymojo]

Would love to see what a Tardis 22 is...pics please!! :thumbsup::thumbsup:

[ConceptRacing]

Seen one for real the other week, lots of carbon and some shiney bits, very nice, I'm sure it was at coventry 2wd regional last week.

[Dalton]

Pictures have been leaked !!!!!!! Apparently you get s free sonic screwdirver with every kit too :)

http://i39.photobucket.com/albums/e179/Pro_Tech/unbranded-dr-who-talking-tardis-money-bank.jpg

[Tom3012]

Pictures have been leaked !!!!!!! Apparently you get s free sonic screwdirver with every kit too :)

http://i39.photobucket.com/albums/e179/Pro_Tech/unbranded-dr-who-talking-tardis-money-bank.jpg

that looks a bit too short for a 22 :woot:

[mattybucks]

that looks a bit too short for a 22 :woot:


It'll probably handle like one though!!!

[Funkymojo]

Pictures have been leaked !!!!!!! Apparently you get s free sonic screwdirver with every kit too :)

http://i39.photobucket.com/albums/e179/Pro_Tech/unbranded-dr-who-talking-tardis-money-bank.jpg

Will it include Dr Who as the driver?? :p:p:D:D

[Chequered Flag Racing]

@ Dalton

Is that Cab forward?

[till]

hmmm it looks more like cab everywhere :P

[peetbee]

It should be easy to TQ if it has time travel!

Saw one at the national today and it looks very nice, went well too:thumbsup:

[Belsten]

car looked extremely good today, both on the track and on the bench :drool:
I need one

[Chequered Flag Racing]

Come on Jimmy, post the pictures, the suspense is killing all AC car lovers :D

[GRIFF55]

The car drove really well on saturday and was really good in the wet too!!
What a sexy bit of kit, atomic does it again!!

I'd best describe the way it goes as a cr2 with lots of steering:D

[paulc]

Pics pleeeeeeease

[V-Rossi]

The car drove really well on saturday and was really good in the wet too!!
What a sexy bit of kit, atomic does it again!!

I'd best describe the way it goes as a cr2 with lots of steering:D

You get less teased in most striptease bars than in this topic :D

[OldTimer]

Been away on holiday so not been able to post any pics earlier, the chassis has a shorter wheelbase than the kit chassis and also gives you a lot more room for you electrics hence the Tardis 22 ;) just sorting out a revised shell at the moment, also looking to see if the ftw vane will fit.

http://www.nortechracing.com/ac/22/tardis_22_6.jpg

http://www.nortechracing.com/ac/22/tardis_22_2.jpg

[GRIFF55]

Lovely chunky atomic carbon front tower on there too;)

[stegger]

LOTS more room at the front !!!!! :drool::drool::drool:

I likey alot :woot:

[stegger]

How has testing gone ? Is it better in the low speed corners and forward grip ?

[Spencer Mulcahy]

I will ask the question on everybodys lips Jonathan how much is it going to be. Also has there been weight used during testing cheers.

[Wacker 2]

I saw Jonathon using it for the first time at our latest Mid West Regional at Coventry and it did look a hell of a lot better than it did before.

It looked far more driveable with more weight over the rear wheels and although it is shorter than the original 22 it looked more stable.

I think a friend of mine had a brief go with it on the day and he said it felt really good.

Its certainly got me and my CR2 a wee bit nervous! lol :thumbdown: :woot:

Jon!

[tomtom]

Like it very much, especially the new weight distribution (more on rear end).

Think I'm going to keep me 22 ! :drool:

When ?

[GRIFF55]

It had plenty of low speed cornering on old staggers and high speed with no weight on the front. The only weight in the car i ran was a rudebits under lipo one.

[OldTimer]

I will ask the question on everybodys lips Jonathan how much is it going to be. Also has there been weight used during testing cheers.

Thats the not so good bit, at the moment all the parts are coming out at around £140 :( this is mainly due to the moulded carbon fibre chassis with the kickup moulded in, as you can see hopefully in the photo below, also there are a lot of parts with all the layers of sidepods a total of 10, 5 each side which you can add and remove to alter flex. As well as battery posts and the lipo strap etc.

http://www.nortechracing.com/ac/22/tardis_22_5.jpg

Re the weight the only weight added is a 110gram 2mm thick brass weight under the lipos, no rear losi brass weight kit or other weights added to the car.

[Spencer Mulcahy]

That's not to bad Jonathan is there any chance of the two screw holes either side of the hinge pin brace from the original chassi to be put in during manufacture for the brass weight kit that is sold on here cheers.

[OldTimer]

Thats already been incorparated into a updated version of the chassis, so you can fit the slinga weight that fits between the motor and gearbox ;)

[Spencer Mulcahy]

Fantastic :D

[Ben Turner]

Any idea when it will be available? Griff's looked very good on saturday!

Ben

[Spencer Mulcahy]

Is that price with a shell?

[peetbee]

I think the original shell still fits this chassis :D

[mrspeedy]

How much shorter is the wheelbase than the std version ?

[OldTimer]

Currently its 10mm shorter than the kit chassis. The kit shell does not reach the rear shock tower even with it being shorter.

The approx price above does not include for a shell or for the link between the gearbox and lipo strap.

[mrspeedy]

OK thats cool, are the side pods the same size as stock or have they been moved back too ?

The reason I ask is cos I'm making a mould for a new shell for the 22 and it might as well fit this chassis too :thumbsup:

[OldTimer]

OK thats cool, are the side pods the same size as stock or have they been moved back too ?

The reason I ask is cos I'm making a mould for a new shell for the 22 and it might as well fit this chassis too :thumbsup:

Sidepods are shaped to replicate the stock sidepods, the chassis is reduced in length from the rear off the car, so the front 3/4 of the car is the same as a stock car.

Only difference is that the sidepods need to be raised so they are just above the bottom of the windows on the kit shell.

[tomtom]

So kit shell will fit, very nice

Can't wait for it ! :woot:

Please include the link between gearbox and lipo holder too.

[OldTimer]

The kit shell sits to high as the lipos are now under the sidepods, the outline
of the chassis is the same as the kit shell.

[mrspeedy]

We've already been asked to allow enough room under our shell for side by side lipos so looks like we have that covered ....

[codi jones b4]

when will the kit be up for sale:D

[dirk702]

One in pre order for me ! :woot:

[GRIFF55]

Speedy, can you do a shell similar to the cougar one you've made? That is soooo sexy!

[Northy]

I suppose we could make a batch...... :wub

[Spencer Mulcahy]

What you making a batch of G.

[Northy]

Er... Tardis 22 kits Spencer :woot:

[Spencer Mulcahy]

Are you like a sub contractor for Jonathan then G.

[V-Rossi]

Graham runs the sales department of Atomic Carbon :)

[tony12795]

Here are the pictures off my Tardis. Mine is little diffrent as I am using the standard shell with self made lexan side pods. I have moved the servo back 10mm and am testing diffrent wings, as you can see at the min its X6!!!

http://img806.imageshack.us/img806/6400/img0219t.jpg

http://img39.imageshack.us/img39/4756/img0221vf.jpg

http://img838.imageshack.us/img838/8614/img0222zc.jpg

http://img62.imageshack.us/img62/971/img0224vc.jpg

[HarlowS]

Jimmy, can we ban the previous post due to explicit pics of homosexual wheels !!

[tony12795]

LOL!!! :woot:

At least there not spoked or mixed colours!!!

You no what I like about you Harlow..........

Jimmy, can we ban the previous post due to explicit pics of homosexual wheels !!

[HarlowS]

mixed colours..... now there is an idea......

[Ben Turner]

Whens the first batch going to be ready? :drool:

[wezzer]

a tard for a tard eh ben ;-)

[markwilliamson2001]

Classy knock down wezzer! :D

[styleone]

Well done guys!! looks brilliant...shorter wheelbase? how much shorter is it?

[V-Rossi]

10mm

[stegger]

When you say 10mm shorter, is this from the shortest you can get the standard kit ? :confused:

[OldTimer]

The chassis is 10mm shorter.

[stegger]

Thanks fella.