PDA

View Full Version : SX3 Big Bore Shocks


Skidmark
18-06-2011, 08:15 PM
Ok I'm confused:confused: I've built my shocks with the six hole pistons on the rear and the four hole pistons up front.

The front feels fine but the rear not so good so I started to think maybe I had assembled them incorrectly. Also reading the Rcracer build on this forum and I found myself reading this (A Titanium Nitride coated shock shaft is standard. Six-hole pistons feature up front and four-hole versions at the rear.)

Can anybody please confirm which is the correct way?:blush:

Thanks

Rob_B
18-06-2011, 08:25 PM
Ok I'm confused:confused: I've built my shocks with the six hole pistons on the rear and the four hole pistons up front.

The front feels fine but the rear not so good so I started to think maybe I had assembled them incorrectly. Also reading the Rcracer build on this forum and I found myself reading this (A Titanium Nitride coated shock shaft is standard. Six-hole pistons feature up front and four-hole versions at the rear.)

Can anybody please confirm which is the correct way?:blush:

Thanks


I would say it's 4 upfront 5 or 6 rear

MattADH
18-06-2011, 08:43 PM
My error - sorry. Six-hole rear pistons and four holes at the front.

Will amend the review as necessary...

sime46
18-06-2011, 08:52 PM
I've gone for 4 in front and 5 in the rear.

Skidmark
18-06-2011, 10:16 PM
Thanks for clearing that up for me:thumbsup: I'll be running the car for the first time tomorrow so I'll see how it goes!