PDA

View Full Version : B44.1 Setup from Talywain and Kiddy Nats


markwilliamson2001
22-06-2011, 11:06 AM
Hi all,

Have any of the top boys got their setups from Kiddy and Talwyain Nats for the B44.1?

I see that Ghea pistons all round, and cut down grey springs on the front seem popular at present (according to Bradby setups) but can anyone provide me with a setup sheet please?

Cheers
Mark

_sleigh_
22-06-2011, 01:13 PM
Hi Mark,

I'm on a course this week, but will try to upload my set-up from Kiddy to CML's site ASAP (via Wez).

BTW - I didn't use Ghea pistons :)

Cheers
Phil

markwilliamson2001
22-06-2011, 01:56 PM
Cheers Phil.
See you Sunday if your attending :)

Belsten
22-06-2011, 08:03 PM
Im by no means a top driver but I was in the C with my 44.1 and ran the following

Front
Silver springs
Losi 40wt oil
AE No 2 pistons, inside hole on tower, outer on wishbne

Rear
Silver springs (most ran greens)
GHEA No 1 pistons
Inside hole on tower and wishbone
Losi 35wt oil

Medium wheelbase, no anti squat shim, 1 deg alloy rear hubs, AE ballast weight

markwilliamson2001
22-06-2011, 08:11 PM
Did you run any roll bars Dave? They seemed popular at Talywain, fro, the pictures anyway....
I always run a silver rear roll bar, and occasionally a silver front one when grip is high..

Belsten
22-06-2011, 08:19 PM
yup sorry, silver roll bar front and rear at both Taly and Kiddy, it was high grip, on yellow mini's,
Taly I cut off inner and outer rows on front and rear
Kiddy, outside 2 rows front and rear and inside row all round