View Full Version : diff movement side to side on sx3
leeboy44
02-07-2011, 08:45 PM
Hi guys
just run my car up the drive and back less then 20ft on some old tyres to bed every thing in before racing, adjusting the diffs i found the diff front and rear move side to side by about 4mm?
is this normal?
reading the manual and i cant seem to see any spacers/shims for this
any ideas ??
john333
02-07-2011, 09:54 PM
my sx2 does this too, has caused me no problems and the belts will make the diffs run nice and true
bigred5765
02-07-2011, 09:54 PM
just checked mattys there is a small amount of side play 2mm or so
leeboy44
03-07-2011, 05:01 AM
do you think its worth getting shims made for this?
will have a real good look after to see how much movement there is, the front moves more then the rear on mine
bigred5765
03-07-2011, 08:36 AM
never noticde till you mentioned it so i guess no foul no harm ether way
stegger
03-07-2011, 01:31 PM
Could be why the rear wider belt is fraying and breaking ;) Try shimming it up and see if the belt continues to fray !
feniks
03-07-2011, 07:02 PM
rear belt breaking??????
ran my car already a lot and there issent a thing to see on the belt.
and about 2mm of play so ??????
cant see the problem with some smaal play
bigred5765
03-07-2011, 09:09 PM
Could be why the rear wider belt is fraying and breaking ;) Try shimming it up and see if the belt continues to fray !
its only the middle belt that a few people have mentioned, never had any probs front or rear.
stegger
03-07-2011, 09:21 PM
its only the middle belt that a few people have mentioned, never had any probs front or rear.
Thought it was the rear :blush: I'll shut up, then :lol:
john333
03-07-2011, 11:11 PM
do sx2 middle belts break? mine is bloody ancient with no faults what so ever, maybe it's the tensioner causing a problem on the sx3??
bigred5765
04-07-2011, 11:28 AM
dont think so i know people running tensioners on there sx2 but yeh weve had a belt go on the sx2
ulrich
04-07-2011, 03:55 PM
do sx2 middle belts break? mine is bloody ancient with no faults what so ever, maybe it's the tensioner causing a problem on the sx3??
Saw Si Moss and Cockerill was using mid belt tensioner on their SX2 at last years Euros
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.