B44 one-way

[SHY]

What AE or JC part. no is the B44 one-way?

Does there exist both a centre and front one-way?

[sparrow.2]

AE part #1728 for NTC3 be sure to get this one or the outputs will be too short!

Try and pick up part number JC-1156 too. They are springs that go in the outdrive cups and stop the outdrive shifting in the bearing and destroying it or shearing off... useful :)

[IceMike]

http://www.oople.com/forums/showthread.php?t=6897

there is already a thread with the info to get one in. there isnt a specific one yet for the car. but the ntc3 one is the one that we are all using prob. i know i have one. it is the same as the one used for the bj4, there are ones made my yok and a couple of other alternatives. just look on there and there is a like to a site with some on it

[SHY]

Great, thx! :D

[Sabben]

Hope it is okay for you if I borrow your thread Svein Harald;)

Does anyone know if the B44 and Kyosho Lazer diffs are th same? That a Lazer diff will fit in the B44...?:eh?:

[RogerM]

I doubt it .... will check though when I pull the one-way out of my BJ4 before sale.

[racdeaf]

Hope it is okay for you if I borrow your thread Svein Harald;)

Does anyone know if the B44 and Kyosho Lazer diffs are th same? That a Lazer diff will fit in the B44...?:eh?:

no mate it won't fit as i tried the xz 5 gear as it slightly bigger

[Mike Hudson]

Anyone know the right number of shims to go on each side of the onway yet?

[OldTimer]

Anyone know the right number of shims to go on each side of the onway yet?

Yes posted here at the bottom http://www.oople.com/forums/showthread.php?t=7370

[Mike Hudson]

thanks very much :)

[Sabben]

no mate it won't fit as i tried the xz 5 gear as it slightly bigger

Is it the ring gear that is to big i diameter? But if so, wouldn't the kyosho diff fit if you put a B44 ring gear on?