PDA

View Full Version : Shock o rings for 511


mikeyscott
28-08-2011, 04:49 PM
Finding shocks loosing too much oil, what o rings are people using. Currently using nortech ones.

muratti
28-08-2011, 05:35 PM
How are the Nortech ones? Never heard of them... I use either stock ones (they donīt leak if you use the white plastic spacer instead on black spacer-shims-black spacer) or the Associated ones ( much smoother used with black spacer-0.4mm shims-black spacer).

mikeyscott
28-08-2011, 05:43 PM
How are the Nortech ones? Never heard of them... I use either stock ones (they donīt leak if you use the white plastic spacer instead on black spacer-shims-black spacer) or the Associated ones ( much smoother used with black spacer-0.4mm shims-black spacer).

Can't remember what spaces and so forth I have in there. I'll look at that etc.

Jan Larsen
28-08-2011, 06:05 PM
Standard red ones. Makes the shaft move just fine and keep the oil in. No shims required.

Foppa
28-08-2011, 08:46 PM
I am using Kyosho X-rings in mine, no leaking and smooth there are two versions one is red and one is transparent difference being transparent = a little smoother but shorter life

InsideLineModels
28-08-2011, 09:06 PM
I am using Kyosho X-rings in mine, no leaking and smooth there are two versions one is red and one is transparent difference being transparent = a little smoother but shorter life

I heard that the kyosho x rings (grooved) were a pretty popular choice at the euros. I had a few packs in a couple of days ago and only have one pack
left now. Will have more in soon!

Kev

mikeyscott
28-08-2011, 09:43 PM
Fit tamiya shocks?

I'll take them to try.

pugs
29-08-2011, 08:25 PM
Standard red ones. Makes the shaft move just fine and keep the oil in. No shims required.

agreed:thumbsup:

mikeyscott
29-08-2011, 09:25 PM
Got kyosho ones and new tamiya reds coming.