View Full Version : RC10 stealth think B2
Checa
11-09-2011, 08:25 AM
After 20 years sitting on the shelf i thought i would give it a go. Put my LRP SXX speedo in and lipo's out of my starter box and borrowed a 5.5 motor super glued the side walls of the tyres cos they were perished :o
and took it out for a race and it was awesome:woot: so i'm now thinking about racing it more but need wheels and a body who stocks the OLD school stuff:confused:
It's black ali tub stealth version
Checa
12-09-2011, 01:08 PM
http://www.youtube.com/watch?v=0-FyV-NUrB4
Video of the A final at Braxted RC10's rule :thumbsup:
peetbee
12-09-2011, 02:13 PM
trackside spares managed to get some wheels and shells fairly recently, might be worth trying to see if he can get more?
Si Coe
12-09-2011, 06:57 PM
If its the alloy tub its not a B2 (thats a plastic car) its a Team car.
The picture below is mine, running at Bury with a Team Wave RBS and Novak 10.5t. I've tried hotter motors but the slipper didn't like them - if you are running a 5.5t I'd recommend fitting the slipper from a B4 to be on the safe side. It fits straight on as most of the gearbox is the same.
The shell and wheels both came from ebay, where there are several places doing shells. The wheels are from JC's web shop and come in a set with the fronts too.
I'm doing better with mine than I was with a B4....
Ironically Braxteds predecessor (Springfield) is where I used to race my first RC10, back around 1990!
isobarik
13-09-2011, 04:00 AM
looking good over shooting a couple of corners but hey it was an long track..
mvh isobarik
Checa
13-09-2011, 04:37 PM
Some pics :)
tony6187
13-09-2011, 04:41 PM
That's an rc10 team car
Checa
13-09-2011, 04:43 PM
If its the alloy tub its not a B2 (thats a plastic car) its a Team car.
The picture below is mine, running at Bury with a Team Wave RBS and Novak 10.5t. I've tried hotter motors but the slipper didn't like them - if you are running a 5.5t I'd recommend fitting the slipper from a B4 to be on the safe side. It fits straight on as most of the gearbox is the same.
The shell and wheels both came from ebay, where there are several places doing shells. The wheels are from JC's web shop and come in a set with the fronts too.
I'm doing better with mine than I was with a B4....
Ironically Braxteds predecessor (Springfield) is where I used to race my first RC10, back around 1990!
I used to race there as well Keith Wright still runs it. Do you remember Kristian Gibbs and Graham Kisby as they still race there :o
Checa
13-09-2011, 04:52 PM
Are these what i need
Front
http://www.amainhobbies.com/product_info.php/cPath/1_26_214/products_id/20880/n/JConcepts-Rulux-Associated-B4-Front-Wheel-Yellow-4
Rear
http://www.amainhobbies.com/product_info.php/cPath/1_26_214/products_id/20882/n/JConcepts-Rulux-1-10th-Rear-Wheel-Yellow-4
Si Coe
13-09-2011, 05:48 PM
The fronts are fine, but the backs aren't. You need more offset than a B4 wheel offers, and unless yours has been changed you'll find it has a larger diameter axle than the B4 uses.
Its JC racing (http://www.jcracingproducts.co.uk/home/) not J Concepts - They don't currently have RC10 ones on ebay but email and ask.
I remember Keith and Kristian, don't remember Graham. I'm Simon Davanzo, raced there in the early 90's till I went to Uni - my brother Andrew raced there a while longer.
Love the Radioactive sticker on the shell - that takes me back!
peetbee
13-09-2011, 07:05 PM
The fronts are fine,
When I tried B4 fronts on my team car I couldn't get full lock:confused:
Si Coe
13-09-2011, 07:23 PM
When I say B4 fronts the one I have are off a B4, but not kit ones. I think they are Hot Bodies. They look a little narrower than kit ones.
peetbee
13-09-2011, 08:40 PM
That must be it then, standard width B4 front wheels don't let you get full lock.
Caine
14-09-2011, 09:48 PM
You need to be using the GT wide front axles to use B4 fronts, you can use B4 rear hub carriers with RC10 CVD's with 3/16th axles and bearings to use B4 rears. Hub carriers need to be drilled to accept 1/8" Hinge pins.
JC Wheels are good quality, good price and saves you some cash on the above:thumbsup:
Checa
20-09-2011, 03:17 PM
These come today from JC Racing :thumbsup:
Miggers
20-09-2011, 05:39 PM
Yeah,you need JC Racing wheels.
http://www.jcracingproducts.co.uk/products/
My Cobra sits on RC10B2/3/4 JC Racing 5 spokes:
http://i91.photobucket.com/albums/k307/miggers_2006/Mardave%20Cobra/MardaveCobra002.jpg
http://i91.photobucket.com/albums/k307/miggers_2006/Mardave%20Cobra/MardaveCobra007.jpg
They're their best sellers.
Mark
Gnarly Old Dog
20-09-2011, 07:34 PM
I remember Keith and Kristian, don't remember Graham. I'm Simon Davanzo, raced there in the early 90's till I went to Uni - my brother Andrew raced there a while longer.
Love the Radioactive sticker on the shell - that takes me back!
Such a small World :-) I grew up racing at Springfield on the old school car park and I probably used to serve you in the shop (Radio Active) back then ;)
Its great to know Graham Kisby is still racing - I certainly remember him and Kristian - and The Davanzo family name certainly rings bells although if memory serves, you were probably both knee high to a (Tamiya) Grasshopper back then ???
As for the Radio Active decals - I wish I still had some :-(
Good times back then - one set of tyres could almost last a season!
Si Coe
20-09-2011, 09:36 PM
Yes I remember you. As I was telling Danny I've still got a Parma Cyclone that was either yours or his old team motor - 17x4 IIRC. Wasn't exactly knee high (I was 14) but you probably remember my younger brother Andrew more than me anyway.
Both of us were older than Kristian Gibbs though! I still laugh when I remember little Kristian stood on the rostrum alongside the towering Darren Foy......
I've still got a few old shells with RadioActive stickers, even one with Ashley's models stickers too.
fredswain
21-09-2011, 04:18 PM
Clearly the easiest way to run 2.2 tires is to just buy the JC wheels. If you don't want to go this route you have several options. Run the RC10GT wide front axles and then use B4 front wheels. You must have the inline steering hubs for this. At the rear you can keep the stock hubs if you use B2 rear cvd's and bearings. Then you can just bolt on some Thunder Tiger BXII rear wheels.
Checa
21-09-2011, 07:12 PM
Such a small World :-) I grew up racing at Springfield on the old school car park and I probably used to serve you in the shop (Radio Active) back then ;)
Its great to know Graham Kisby is still racing - I certainly remember him and Kristian - and The Davanzo family name certainly rings bells although if memory serves, you were probably both knee high to a (Tamiya) Grasshopper back then ???
As for the Radio Active decals - I wish I still had some :-(
Good times back then - one set of tyres could almost last a season!
Check these out :woot:
Checa
19-10-2011, 07:04 PM
Just bought a new body so i'm going to be doing a few race meets next year:thumbsup:
Body Paint
19-10-2011, 08:46 PM
That's sweet , just started a search for rc10 parts to build one up. I think it's an age thing Danny, sooner or later we All want to revert to our teens lol
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.