PDA

View Full Version : Phat Bodies Chunk owners?


styleone
21-09-2011, 10:48 AM
Well after a long search I am about to step into the realms of owning and running the Phat Bodies Chunk. I am a great fan of mid-motor conversions in 2wd 1/10 so as I am racing mini/micro at present, thought it perfectly logical to grab this tiny monster to thrash indoors through the winter months.

I am aware of some info regarding running experiences, set-up etc over on UkMicrox, but would like to make contact with other Chunk owners who may be able to share some set-up tips etc.

I have spoken with the guys over at Phat Bodies who are very helpful...so, anybody running the 2wd side of Microx drop me a line please.

Can not wait to run the buggy :thumbsup:

Jonesy
21-09-2011, 02:27 PM
I had one for the back end of the Micro Nationals last year, even won the last one at Ardent withh it. Fantastic car, I only sold mine on to concentrate on the 1/16th 4wd series at the Nationals.

You going to come along to a few? Telford, Dudley and Hereford all have one so it's not to far!

styleone
21-09-2011, 05:50 PM
I had one for the back end of the Micro Nationals last year, even won the last one at Ardent withh it. Fantastic car, I only sold mine on to concentrate on the 1/16th 4wd series at the Nationals.

You going to come along to a few? Telford, Dudley and Hereford all have one so it's not to far!

Thanks for posting :) good to hear another driver rate the chunk, all I hear is good reports. I'll be down at Telford and Dudley this year so may catch up then.

Looking forward to 2 nationals right on our doorstep :D

Dombrasky
21-09-2011, 06:27 PM
Hi
Ive just got one, to run in the last 4 nats alonside my carisma
ive only ran it once so far and all good
Mr Speedy from Phat Bodies really is the guru of Chunk setup

styleone
23-09-2011, 11:04 AM
Hi
Ive just got one, to run in the last 4 nats alonside my carisma
ive only ran it once so far and all good
Mr Speedy from Phat Bodies really is the guru of Chunk setup

Thanks for feedback, wonder how many 2wd will be at the Nats this year?..I know a lot have switched to concentrate on 4wd with Carisma platform etc....Looking forward to running it as I'm a massive fan of the small British conversion manufacturers these days...Mr Speedy is super helpful with support as stated, seems most owners or ex owners are suggesting that the set up on his build thread is the best starting point.

:thumbsup: Aviiit lol

Jonesy
23-09-2011, 01:13 PM
2wd class is proving to be more popular than last year so far.

styleone
23-09-2011, 02:07 PM
2wd class is proving to be more popular than last year so far.


Thats what I'm talking about :woot::thumbsup:...good news looking forward to it

styleone
25-09-2011, 04:58 PM
Anybody seen Schuey stagger ribs in touring car wheel size to fit chunk? Can't find them anywhere? Cheers :)

peetbee
25-09-2011, 06:47 PM
Everyone I've ever seen runs either rally blocks or spikes on their chunks

mrspeedy
25-09-2011, 07:45 PM
Anybody seen Schuey stagger ribs in touring car wheel size to fit chunk? Can't find them anywhere? Cheers :)

They don't make them, tho it's easy enough to cut n shut a pair of 10th tyres, they work really good too but aren't legal for BRCA stuff.

Our tyre of choice for most tracks on the front are worn narrow mini mins in yellow compound. Nearly always with the inner and outer rows of pins chopped off :thumbsup:

styleone
25-09-2011, 09:31 PM
Cheers Si,

I will stick with the mini pins I got with the buggy (second hand) I do have rally blocks also, so another option I guess. Cheers :)

Body Paint
28-09-2011, 08:28 PM
Im still in for 2wd, looking forward to it. Si's new setup is real good, gonna be great fun this year

styleone
29-09-2011, 12:43 AM
Ran Chunk for first time tonight...needs a few tweaks but was really pleased with it....so much steering :thumbsup:...I can hear the shout of 'Off with the outside rows' :woot: great buggy

rcdunk
29-09-2011, 06:38 AM
Ran Chunk for first time tonight...needs a few tweaks but was really pleased with it....so much steering :thumbsup:...I can hear the shout of 'Off with the outside rows' :woot: great buggy

Was having the same problem had stiffened the front up to try and stop the car turning up it's own arse but it just didn't feel right and didn't help much anyhow so outer and inner row of spikes cut/dremeled off huge difference just about right not sure what it will be like when the grip comes up on Sunday taking dremel with me if needed lol

mrspeedy
29-09-2011, 01:00 PM
I'm running with almost bold tyres up front now, and still steers amazing !!

A good way to bed front tyres in, is to bolt them on the back go do some donuts in the car park :thumbsup:

Then if you need more steering add weight just behind the steering bellcranks ....

styleone
30-09-2011, 02:38 PM
I'm running with almost bold tyres up front now, and still steers amazing !!

A good way to bed front tyres in, is to bolt them on the back go do some donuts in the car park :thumbsup:

Then if you need more steering add weight just behind the steering bellcranks ....

Ive currently got 10 grams behind bellcrank and it seems good. My front Mini pins are worn down well but I recon you could almost run complete slicks on the front as suggested Si...The buggy does not suffer from under steer and thats a fact :woot:.....anybody experienced an issue with the rear grey conversion block (around back of x6 gearbox) shedding its shock tower mount screws? Mine has worked loose after some rear end slaps on the ruggery lol...Si...how much is a replacement and do you have any at present mate?

mrspeedy
30-09-2011, 06:07 PM
We usually run 10gms on the nose and 10 behind the bellcranks with near bold tyres and it's just perfect ... even lends itself to a little handbraking into corners :D

I do have a few spare link blocks but its an easy fix if your screws are coming loose, just drill the holes a little deeper into the block, a 2.3mm drill bit is required and then screw in, should be fine, mines an original with no problems .....

styleone
02-10-2011, 11:04 AM
Cheers Si, ill grab a spare if I can anyway mate ready for when this re drill gives up. Is everybody running 72 spur with the new gt14b rear arms? Seems there may be a small arm mod needed as at full compression spur taps arms, I did run a 70 spur but I noticed its stated in build thread that base set up has 72? Thoughts please guys

mrspeedy
03-10-2011, 06:53 PM
I'm still on my original 72t spur and not had any issues with it ..... first I've heard of this TBH ....

styleone
05-10-2011, 10:23 PM
Ran the Chunk again tonight, when I wasn't being demolished by buggies driving against the race direction....the chunk was lovely, I'm loving the jumps with the buggy and the nose goes exactly where you pont it...(Not always the rite place with my driving :) )

Really looking forward to a much needed rebuild and back on the track for some more 2wd fun....brilliant :)

styleone
08-10-2011, 11:12 AM
Wondering if anybody knows about a different mod for the front hubs/castor blocks...eg one without the capture pins cut down method, somebody mentioned at our local meeting last week that proline do a bearing carrier that has an offset pin that goes straight through? Any info much appreciated...craig,dan or si...any thoughts lads

Cheers :)

Jamesd
08-10-2011, 12:28 PM
Wondering if anybody knows about a different mod for the front hubs/castor blocks...eg one without the capture pins cut down method, somebody mentioned at our local meeting last week that proline do a bearing carrier that has an offset pin that goes straight through? Any info much appreciated...craig,dan or si...any thoughts lads

Cheers :)

Have a look through this forum it should be in there.

http://www.uk-microrc.co.uk/forum/index.php?showforum=465

mrspeedy
08-10-2011, 04:02 PM
I think the Proline hubs use trailing axles very much like the new AE SC10 front end setup that uses a hex .....

Save your money and look for a In-line setup .... you can't believe how different and how badly the car drives with trailing axles. I spent 2-3 months trying to make these work, and failed !!

Do you have the short pin in the bottom and a a screw with a shoulder in the top as in the build thread ?

rcdunk
08-10-2011, 07:15 PM
I think Gavin who won first national round at broughton runs the pro line front hub set up . His dad Stuart mentioned something when I was talking to him the Saturday night while we were building the track so I didn't take it in properly and never had time to go and have a look on sunday

styleone
09-10-2011, 12:13 AM
No way :) it was Gavins Dad who told me the same I believe! Last wednesday at our midweek club meeting...I'm going to have a mooch at a few options and will feedback to those who may be interested soon. I know the lads have been trying different options over on ukmicrox...need something that won't pop out capture pins on front impacts....or the other answer is to drive better on my part ;)

styleone
26-10-2011, 10:40 PM
Well after a frustrating few weeks trying to get the Chunk front end sorted it drove lovely tonight at local club meet. Best its been so far. Only picked up 3rd in the B final but car really was brilliant. Bags of steering, brilliant in the air and best of all no shooting off front caster capture pins :)

The micro 2wd class is so much fun, just wish more manufacturers would get on producing buggys......errr, in fact scratch that, ill stick with the Chunk thank you :D

I'm still a fair bit off the main pace but just really enjoying the drive with the Chunk....if you are pondering about getting one built up DO IT. The buggy is wicked. Thanks Speedy and Dan :thumbsup: oh yeah, and hurry up with Chunk 4 please lol

mrspeedy
27-10-2011, 11:01 AM
Sounds like you had a great time running Chunk at your club meet, hassling and beating 4wds with a 2wd chassis is sooooo satisfying, but gotta make sure you remind them when you pass that your only driving a 2wd :woot:

If you want a super tough front end there are some ali steering blocks on 'the bay' not a bad price either - http://www.ebay.co.uk/itm/STRC-Alu-Steering-Knuckle-STH100313GM-BLITZ-E-Firestorm-/320778303020?pt=Radio_Control_Parts_Accessories&hash=item4aafe0762c#ht_1928wt_910

and Chunk S4 is coming .... slowly :lol:

styleone
27-10-2011, 12:53 PM
Sounds like you had a great time running Chunk at your club meet, hassling and beating 4wds with a 2wd chassis is sooooo satisfying, but gotta make sure you remind them when you pass that your only driving a 2wd :woot:

If you want a super tough front end there are some ali steering blocks on 'the bay' not a bad price either - http://www.ebay.co.uk/itm/STRC-Alu-Steering-Knuckle-STH100313GM-BLITZ-E-Firestorm-/320778303020?pt=Radio_Control_Parts_Accessories&hash=item4aafe0762c#ht_1928wt_910

and Chunk S4 is coming .... slowly :lol:

lol Your so rite there Si, I always forget to drum it into the lads that I'm driving 2wd :thumbsup:. Loved every minute of it and the buggy really is starting to perform as I wanted.

I will defo want the s4 as soon as its done...in fact if you catch me on a Thursday morning after having driven my s3 you might get me to buy 2 lolol ;)

styleone
28-10-2011, 12:21 PM
Anybody got a Chunk they are selling? I want another one! :blush: Get in touch if you have guys...money awaits the best one offered :thumbsup:

Jamesd
28-10-2011, 01:11 PM
Anybody got a Chunk they are selling? I want another one! :blush: Get in touch if you have guys...money awaits the best one offered :thumbsup:

there was one on ebay not long ago that did not sell, I will see if I can find the owners name so you can message him
The guys ebay name is
sailingdunk

styleone
28-10-2011, 01:51 PM
there was one on ebay not long ago that did not sell, I will see if I can find the owners name so you can message him
The guys ebay name is
sailingdunk

Oh brilliant mate, thank you for your kind assistance with that...as we all know ,they are like rocking horse doo doo :lol:

Jamesd
28-10-2011, 02:01 PM
Oh brilliant mate, thank you for your kind assistance with that...as we all know ,they are like rocking horse doo doo :lol:

Yer I was looking for a second hand one but decided against it, as I have a chunk and two sharks, are you racing at Nationals this year?

styleone
28-10-2011, 02:12 PM
Yer I was looking for a second hand one but decided against it, as I have a chunk and two sharks, are you racing at Nationals this year?

I'm at the Telford round as I'm filming the event for the club (its my local indoor track) I'll be around for the whole days fun :thumbsup::thumbsup: I'll most prob be at Dudley as well as its where I live :)

Jamesd
28-10-2011, 02:14 PM
I'm at the Telford round as I'm filming the event for the club (its my local indoor track) I'll be around for the whole days fun :thumbsup::thumbsup: I'll most prob be at Dudley as well as its where I live :)

i am doing the last 4 rounds. Where do you race? As I was at Coventry Uni last year and never found anywhere to race.

styleone
28-10-2011, 02:23 PM
i am doing the last 4 rounds. Where do you race? As I was at Coventry Uni last year and never found anywhere to race.


Im mostly at Telford Hot Trax at present and prob for most of this winter. If you were at Cov Uni then as far as Micro stuff goes you had Dudley and Telford within flinging distance but 1/10 offroad you also had Coventry itself and Kiddeminster fairly close. West Mids is def not buldging with tracks but if you dig around its got a cool scene :thumbsup:

Look forward to meeting you at a micro round soon then...if you hear of any other Chunks for sale then I'm ya man...cheers for posting and the help so far

styleone
01-11-2011, 04:05 PM
So how many Chunks will be making an appearance at Round 2?.....I fancy getting a group photograph of all the 2wd entries with their respective vehicles? :thumbsup:

markwilliamson2001
01-11-2011, 07:10 PM
Well not a chunk per se... But my Kitten SV will be making an appearance now my carbon arrived this morning thanks to fibre lyte!
Just the bodyshell to do now :-)

styleone
01-11-2011, 09:59 PM
Well not a chunk per se... But my Kitten SV will be making an appearance now my carbon arrived this morning thanks to fibre lyte!
Just the bodyshell to do now :-)



:thumbsup: I can't wait to see the Kitten Mark, make sure you let me get some good shots of it mate:drool:

styleone
04-11-2011, 02:04 PM
Thanks to Rcdunk....my second Chunk will be in my hands Sunday :thumbsup:...nothing like having a spare :blush: Can not wait cheers Duncan

Danosborne6661
05-11-2011, 05:14 PM
Can't beat harassing 4WD's with Chunk :wub

styleone
08-11-2011, 12:29 AM
Can't beat harassing 4WD's with Chunk :wub

Your rite Dan! Hopefully ill be able to give double the trouble now I have 2 Chunks lol over kill this end? :D

It was brilliant to see a gaggle of Chunks at Sundays Micro national round! The start grid shot was really cool.

All drivers in 2wd 16th drove really well and Chunk looked really at home on polished sections of the track, fast down straight and nimble in the in field

Love it! :)

styleone
08-11-2011, 02:33 PM
Well it happens in every other section...and seeing as I feel like starting a 2wd 16th revolution here....Show us your Chunks chaps...post up some pics and info if your a member of Club Chunk :thumbsup:

Thomas P
13-11-2011, 11:29 AM
My C2.

http://i123.photobucket.com/albums/o306/gabbax_74/e51b8edd.jpg

Novak mongoose 8.5T
Futaba Servo
Ko Rx
Hardcase Lipos..

Slicks Rallyblocks Yellow, 24 rear 20 front Hard Grey foams.
GEHA Tappered pistons 1mm extra hole
GEHA Brass front bulk
MIP CVD rear
RE 1deg toein hubs (outboard toein)
Ceramic diff balls
30w AE rear and 35w front
MLST greens on all 4 corners.
3Racing shocks, ball end out app 2mm for more droop

styleone
13-11-2011, 04:02 PM
My C2.

http://i123.photobucket.com/albums/o306/gabbax_74/e51b8edd.jpg

Novak mongoose 8.5T
Futaba Servo
Ko Rx
Hardcase Lipos..

Slicks Rallyblocks Yellow, 24 rear 20 front Hard Grey foams.
GEHA Tappered pistons 1mm extra hole
GEHA Brass front bulk
MIP CVD rear
RE 1deg toein hubs (outboard toein)
Ceramic diff balls
30w AE rear and 35w front
MLST greens on all 4 corners.
3Racing shocks, ball end out app 2mm for more droop

Your cars always look so well presented, super cool Thomas :thumbsup::thumbsup:

Thomas P
13-11-2011, 04:37 PM
Thanks m8, do my best :D

Thomas P
13-11-2011, 04:48 PM
clubmate testing my chunk last weekend..:thumbsup:


http://www.youtube.com/watch?v=4QPwFwzsU0s

Dombrasky
15-11-2011, 01:57 PM
Heres mine
The car was built by the creator of Chunk (mr speedy) and was used in the Chunk build guide on the uk-microrc forum :thumbsup:
http://s1221.photobucket.com/albums/dd468/Dombrasky/Phatbodies%20Chunk/?action=view&current=100_0555.jpg

styleone
17-11-2011, 12:44 AM
Thanks for posting chaps, coooooool Chunks :) but then again, I'm a bit biased :blush:

styleone
24-11-2011, 04:00 PM
Well after the C3 Chunk made contact with a track side marker (bad driving on my part) last night...its time to break out the spare for a meeting at Dudley prior to next round of micro nats...its got trailing axles fitted :blush:...I know what your all going to say (including Si ;)) but needs must...anybody found any success with trailing set-up?....somebody say yes please lololol

Thomas P
24-11-2011, 04:11 PM
I have been on trailing since day 1 on my chunk, and love it..im on Schumacher slicks rallyblocks, with Nosram sauce,,slightly understeer on powa, but the car feels superb...but i got green MLST springs, 30 rear 35w AE front, GHEA brass bulk front, stock 20 caster front with shortest link in the front...maximum outtravel on all 4 corners, ..the car is super dialed...

styleone
24-11-2011, 04:17 PM
I have been on trailing since day 1 on my chunk, and love it..im on Schumacher slicks rallyblocks, with Nosram sauce,,slightly understeer on powa, but the car feels superb...but i got green MLST springs, 30 rear 35w AE front, GHEA brass bulk front, stock 20 caster front with shortest link in the front...maximum outtravel on all 4 corners, ..the car is super dialed...

Aha Thomas :thumbsup:...my spare is running trailers with 30 degree caster (same as I run on my inline setup), green LST's at rear and blues up front with 30 weight oil in rear and 35 up front 20 grams just behind steering rack...not too far off yours then mate...although I'm on carpet and polish rather than astro dude :drool:

Thomas P
24-11-2011, 05:28 PM
carpet here all day :)...

mrspeedy
24-11-2011, 05:54 PM
I reckon Thomas's secret is the ghea front bulkhead with bthe trailing blocks ... might be worth digging out some lead :thumbsup:

Thomas P
24-11-2011, 08:45 PM
Ohhh, Yes, the car is Amaizing...still 8 days to hard practice 2wd again...

styleone
25-11-2011, 02:43 PM
Ohhh, Yes, the car is Amaizing...still 8 days to hard practice 2wd again...

I'm going to try more weight near bulkhead after first few runs if I feel it is needed...get over to the new blog and check out the Phat Bodies report mate http://offroadradiocontrol.blogspot.com/ you might like it :thumbsup:

Thomas P
26-11-2011, 07:05 PM
good blog, following it...

6 days left...BUT, if the Timing will be done, all focus on that one..for the time :D

styleone
01-12-2011, 12:47 AM
Well I've ran the trailer up front twice now and if I'm totally honest....I really like them :thumbsup:....a little less steering mid corner but when I got into a flowing section the buggy was smack on...funny thing is...my C2 ran exact same motor, esc, lipo and gearing as my C3 but was smoother to drive!! I could push the buggy more in the tight sections and the trailers def didnt suffer any under steer as some people have found...

I'm going to stick with trailing axles and C2 for a few weeks and work on weight distro a bit more....fun...Chunk is ace!! :woot:

styleone
01-12-2011, 01:01 AM
Well I've ran the trailer up front twice now and if I'm totally honest....I really like them :thumbsup:....a little less steering mid corner but when I got into a flowing section the buggy was smack on...funny thing is...my C2 ran exact same motor, esc, lipo and gearing as my C3 but was smoother to drive!! I could push the buggy more in the tight sections and the trailers def didnt suffer any under steer as some people have found...

I'm going to stick with trailing axles and C2 for a few weeks and work on weight distro a bit more....fun...Chunk is ace!! :woot:

styleone
05-12-2011, 12:44 AM
Well round 3 at Dudley today saw 10 Chunks from my counting. Great to see my favourite 1/16th tearing around in the hands of Si and Dan, Gav, Paul, Ben, and the rest of the Chunk family...class :)

All Chunks looked really well set-up with some nice rear wheel drive action from the lads :D

Jonesy
05-12-2011, 10:09 AM
Breakdown of 2wd from yesterday were:

8 - Chunks
1 - Tamiya
1 - Kitten SV
1 - Mad Chimp

styleone
05-12-2011, 12:24 PM
Breakdown of 2wd from yesterday were:

8 - Chunks
1 - Tamiya
1 - Kitten SV
1 - Mad Chimp


Aha!! cheers Andy, I forgot that there was also 2 other home brews besides the Kitten :thumbsup: All very good veihicles I may add...great day and a true representation of how good the 2wd 1/16th class is getting :woot:

metalmickey0
27-12-2011, 10:46 PM
Aha!! cheers Andy, I forgot that there was also 2 other home brews besides the Kitten :thumbsup: All very good veihicles I may add...great day and a true representation of how good the 2wd 1/16th class is getting :woot:

Only 2 home brews dude. My Tamiya was kit, But you wont see it at a Nat again.Its been retired for my upcoming Chunk:drool:
And besides ,i broke the rear suspension brace and pivot pin at our local club a while ago and havnt got round to fixing it.

styleone
30-12-2011, 01:37 PM
Only 2 home brews dude. My Tamiya was kit, But you wont see it at a Nat again.Its been retired for my upcoming Chunk:drool:
And besides ,i broke the rear suspension brace and pivot pin at our local club a while ago and havnt got round to fixing it.

Damn! it looked lovely as well mate, shame it has been shelf queened from here on in....BUT......that means it is Chunk time :wub:thumbsup::thumbsup: Aviiiit! lol

metalmickey0
30-12-2011, 11:07 PM
Damn! it looked lovely as well mate, shame it has been shelf queened from here on in....BUT......that means it is Chunk time :wub:thumbsup::thumbsup: Aviiiit! lol
ooo yes chunk is on its way.:thumbsup: