bonhead questions xx4 we rebuild

[RC944]

Just when i think all hte hard work is done i have 2 problems

- why am i running huge toe out even though i adjusted front camber link and tie rods as per manual
- have i got the rear arms the wrong way around because the shock springs rub the inside of the wheels!

[tyreman]

On the front the turnbuckles you have are for the wide ackerman link, you need longer turnbuckles to rectify this or move the bellcranks to the wide position.
The wishbones should be left on right and right on left, make sure you don't use rear hubs with toe-in on as your wishbone hangers have 3 deg on them.