View Full Version : Dex210 Arrived!!
MarkLeeds
11-10-2011, 02:38 PM
Picked up today from MB models and started building as I am off work today:thumbsup:
As I am building there seems to be a few screws and washers missing in the bag in line with the instructions. Will keep building and see if they are in a different bag as I go along. If anyone else finds the same problems let me know. So far missing 705005 x 2, 709032 x 2, and 704007 which I have but is not threaded.
gainsy
11-10-2011, 02:44 PM
So is it a complete kit? does the instructions say it's missing bits?
MarkLeeds
11-10-2011, 03:05 PM
No it's a complete kit. The bags are labeled A, B,C etc so as you follow the instructions you use the parts from each bag. The problem is that there are a couple of screws and a couple of washers missing from the bag they are supposed to be in. It may be that I have some left over from other bags, that match the ones missing at the beginning. I'm only up to page 19 so will see when I continue build later on. but at the minute I am missing the screws and washer that hold the front axal in the hubs and a screw from the underneath.
Bungleaio
11-10-2011, 03:06 PM
Screws I'm fine with, I've got loads of them but the washers could be an issue.
Are they not in the seperate bag as shown in the RC lazy vid?
bally
11-10-2011, 03:10 PM
Hi Mark,
let me know if they don't turn up later on and we will get you sorted!
MB
MarkLeeds
11-10-2011, 03:19 PM
Yes everything are in separate bags just not the correct amount so far. Also when screwing the camber ball joint balls to the front wishbone don't overtighten them as I have split one of them already as when using the Allen key screw driver, you can't screw it in straight as the top wishbone hanger is in the way, page 15 left hand diagram. Probably better using short end of a regular Allen key. :)
MarkLeeds
11-10-2011, 03:25 PM
Hi Mark,
let me know if they don't turn up later on and we will get you sorted!
MB
No problems just a few teething problems just was wondering if it was just me:rolleyes: only have imperial screws in my limited spares box lol
gainsy
11-10-2011, 04:09 PM
What are the size's of the drivers you have used for the build? im coming from imperial so want to get the right metric sizes :)
paulc
11-10-2011, 05:07 PM
Should be mainly 1.5 and 2.0mm 7.0 and 5.5mm nut drivers
gainsy
11-10-2011, 05:13 PM
Thank you Paul :thumbsup:
Fozzy1989
11-10-2011, 05:25 PM
Just picked mine upfrom MB too:thumbsup:
Bungleaio
11-10-2011, 07:29 PM
I've got mine ready to build.
Nice to see the manual is in colour :thumbsup:
t8rtot
11-10-2011, 07:35 PM
:( its killing us on this side of the world.
we need pictures!!! :drool:
TonyM
12-10-2011, 12:08 AM
I've just built the gearbox and I'm very impressed with how smooth and solid it is (used RC Lazy Ceramic Balls). I really like the encased thrust bearings, no more fiddling with individual balls ---- Oooh Vicar!!!
The amount of room inside is very impressive. No need to shoe-horne in the electronics, or having to buy silly 'dwarf' lipo's.
phil c
12-10-2011, 12:17 AM
Just finished building the front end and my kit also has screws missing from the stub axles !
Chris-S
12-10-2011, 06:24 AM
http://img804.imageshack.us/img804/6499/img0478am.jpg
Not far to go, shocks are built. Dropped the shell off at Nagy Designs, one less job for me to do!
Armie
12-10-2011, 11:32 AM
Not far to go, shocks are built. Dropped the shell off at Nagy Designs, one less job for me to do!
Will you be running this at Taplow on Friday? Would be good to see.
Jmuck69
12-10-2011, 01:14 PM
Does the manual indicate thrust bearing size?
Big G
12-10-2011, 01:43 PM
RClazy said in their unboxing video 1/16th
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.