PDA

View Full Version : CREAM DEX210 carbon front tower/aluminium mounts


Cream
19-10-2011, 10:47 PM
IN STOCK..... 17/02/2012

Update to this first post showing the new Cream extreme DEX210 front tower and mount set..

The mounts.. made from high tensile aluminum, designed to keep the ball studs in the original position and plain. Complete with tension bar 'V' and weighing 8.4g for the pair.

http://img.photobucket.com/albums/v420/Creamuk/RC%20car%20parts/IMG_8131.jpg



The tower, Made from 4mm thick 100% CARBON FIBRE not a cheaper composite material.




http://img.photobucket.com/albums/v420/Creamuk/RC%20car%20parts/IMG_8135.jpg

Kit comes complete with 4 M3 x 12mm countersunk stainless steel screws.

http://img.photobucket.com/albums/v420/Creamuk/RC%20car%20parts/IMG_8250.jpg


Cost are as follows....


Pair of aluminium front mounts
4mm thick carbon fibre front tower
4x stainless steel screws.

Priced at £28.00

Shock towers will be available separately at a cost of £13.00.

Postage is as before.

U.K. £2.35 recorded
Europe £8.45 recorded (£2.70 un-recorded @ your risk)
non European countries £8.95 (£3.30 un-recorded @ your risk)

Payment is via PayPal....

Check my feed back, Also please leave feed back.

hottuna
19-10-2011, 11:26 PM
I bought your B4 mounts, and they are ace. Go for it! :thumbsup:

Darren Boyle
20-10-2011, 12:28 AM
Noel, you must be a mind reader..... ;)

slowjun
20-10-2011, 01:31 AM
if you build they will come.......:woot::drool:

Origineelreclamebord
20-10-2011, 07:01 AM
I'm very interested, but I think two reinforcing 'beams' that intersect each other (like the DEX210 stock shock tower and the TRF201 shock tower) would be tougher and look better :thumbsup:

Will it also be possible to buy the aluminium blocks seperately?

Dean Washington
20-10-2011, 07:20 AM
i would be very intrested, would have 2 sets, one for my brother to

AK19E
20-10-2011, 11:08 AM
I would be interested too. 4mm Carbon would be perfect. Maybe a rear version too?

André

TDMAK
20-10-2011, 12:37 PM
Make the rear so the ball is on the shock tower instead of the bulkhead.

manic
20-10-2011, 07:27 PM
Would be rather nice with yellow/gold fleck in the carbon weave too:wub

manic

mark christopher
20-10-2011, 07:46 PM
I bought your B4 mounts, and they are ace. Go for it! :thumbsup:

+1 chuffed to bits with mine

Robocop
21-10-2011, 06:39 AM
I would get a front tower and a rear.would be nice if camber links could go on tower like the front maybe even if the kit ones have to be removed ???

TonyM
21-10-2011, 11:57 PM
You know I'm down for one Noel. Your original mounts + DMS tower for the B4/X6 were rock solid.

Andyp
24-11-2011, 06:20 PM
any news on these ?

Andrew Twigger
24-11-2011, 06:23 PM
I would take a pair if the rears included the camber link with two mounting points.

brettness37
25-11-2011, 01:59 AM
Most definitely.

5im0n
28-11-2011, 11:53 AM
Yup count me in, i'd have a set.

sug
28-11-2011, 01:25 PM
Two sets for me please.

Origineelreclamebord
28-11-2011, 01:40 PM
I'd be interested in just the mounts. Would it be possible to buy just these? :confused: :)

Cream
28-11-2011, 01:59 PM
any news on these ?


I'm waiting for my draftsman to draw the carbon bit up. But hope to have some news soon.

Origineelreclamebord the mounts will not be available separately, But the carbon fibre bit will.

Andyp
28-11-2011, 02:11 PM
Cheers keep us updated

ronsand
29-11-2011, 08:33 AM
I would be really interested in at least the front upper camber-link mounts in aluminum (given that they put the links further back like with the original tower)

Cream
06-12-2011, 12:13 AM
Hope to have these ready for the middle of next week. :thumbsup:

ronsand
06-12-2011, 05:49 AM
If you are speaking of the aluminum front upper link mounts; put me up for a pair :)

Andyp
06-12-2011, 06:04 AM
Can we secure a pair and tower ? Or will they be plenty to go around ?

OneKiwi
06-12-2011, 07:37 AM
Yes please and Im sure there will be a heap that will want them after seeing the huge angle that is created with the CF towers

Cream
06-12-2011, 08:27 AM
Can we secure a pair and tower ? Or will they be plenty to go around ?


I've ordered a LARGE batch of the carbon towers, and the aluminuim mounts will be made by me. I currently have material to make well over 100 pairs.

dirk702
06-12-2011, 08:34 AM
Any price and date for these mounts, foto ? :)

OneKiwi
06-12-2011, 08:47 AM
are you going to wrap the alu around the edge of the tower so the position is a lot like the original?

Cream
06-12-2011, 09:17 AM
are you going to wrap the alu around the edge of the tower so the position is a lot like the original?


All will be revealed very shortly :)

OneKiwi
06-12-2011, 04:39 PM
Nice .. are they going to fit the already produced towers? Or are you making a special tower?

Cream
06-12-2011, 04:58 PM
Nice .. are they going to fit the already produced towers? Or are you making a special tower?

They Won't fit any towers I've seen so far. I'll be having my own tower produced which will go with the mounts. The towers will also be available separately. But the mounts with come as a kit with tower and stainless screws.

Final price is not confirmed yet.

sparrow.2
06-12-2011, 06:25 PM
SHOW US SOME PICS ALREADY!

OneKiwi
06-12-2011, 06:28 PM
good things take time kimosabi

Cream
06-12-2011, 06:55 PM
SHOW US SOME PICS ALREADY!


Sorry no pic's, Next week.

sly
06-12-2011, 06:57 PM
Sorry no pic's, Next week.
Do you need my car to model them?:thumbsup:

Bungleaio
06-12-2011, 07:08 PM
I'm definitely in for at least two of these.

rcman162004
06-12-2011, 11:08 PM
I know a couple of us guys in the U.S. might be interested in these

Flame56mx
06-12-2011, 11:53 PM
I ordered an Akula Cf kit for mine, and really no fault of theirs, but the design is flawed ..Cant wait to see what you come up with. Mark me down for a kit please.

antonio_cadiz
07-12-2011, 09:38 AM
hello!
where I can buy and what price.

thanks.

OneKiwi
07-12-2011, 09:49 AM
Have you read the previous posts?

hello!
where I can buy and what price.

thanks.

rcman162004
13-12-2011, 06:32 AM
Any updates?

Cream
13-12-2011, 06:36 PM
Any updates?


Give me a couple of days and I should have something for you all to look at. :thumbsup:

Cream
14-12-2011, 06:36 PM
Sneek peek at the ali section...

http://img.photobucket.com/albums/v420/Creamuk/RC%20car%20parts/IMG_8131.jpg

Andrew Twigger
14-12-2011, 06:45 PM
I'm in. Send me them immediately!

Aran
14-12-2011, 07:11 PM
will they come in black?

Cream
14-12-2011, 07:34 PM
will they come in black?

Nope, Self coloured (silver). They will be supplied with 4 stainless screws though.

Aran
14-12-2011, 07:41 PM
okay thanks :), nice bit of engineering there!

TonyM
14-12-2011, 08:29 PM
Come on Noel - give me something to order for Xmas :lol:

AmiSMB
14-12-2011, 09:17 PM
Noel I have the money I want it now :)

lockmouth
14-12-2011, 09:57 PM
Noel, put me down for one, soon as they are ready :thumbsup:

Cream
14-12-2011, 10:18 PM
Should have the towers tomorrow.

The kit will be...

Pair of aluminium front mounts
4mm thick carbon fibre front tower
4x stainless steel screws.

Priced at £28.00

Shock towers will be available separately at a cost of £13.00.
Mounts will not be available seperately, so please don't ask as refusal often offends.

Postage is as before.

U.K. £2.00 recorded
Europe £7.00 recorded (£2.00 un-recoreded @ your risk)
non European countries £7.50 (£2.50 un-recoreded @ your risk)

Payment is via paypal as a gift or add 4% of total order inc. delivery to cover paypal charges.
Check my feed back, Also please leave feed back.

Bungleaio
15-12-2011, 06:45 AM
2 please plus 2 spare towers, what's your PayPal address please mate?

Cream
15-12-2011, 10:29 AM
Can people please PM me before sending money via paypal :).

Help me keep a recored of who has ordered what.

Bungleaio send me a PM bud, and I'll send you details for payment.

OneKiwi
15-12-2011, 11:39 AM
What do the ali bits weigh? Don't think you can get any other weight that far foward on the dex

Cream
15-12-2011, 11:47 AM
What do the ali bits weigh? Don't think you can get any other weight that far foward on the dex


8.4g for the pair.

hotrodchris
15-12-2011, 07:06 PM
pm sent regarding paypal details?

sly
15-12-2011, 09:27 PM
There are ready and mine is fitted and looks AWESOME
Direct replacement and adds the bling the car needed.
I have pics ready to post but Noel will shortly be posting his pictures.
I been Cream Extreme'd :thumbsup:

Cream
15-12-2011, 09:39 PM
Here thay are all mounted up.

http://img.photobucket.com/albums/v420/Creamuk/RC%20car%20parts/IMG_8137.jpg

http://img.photobucket.com/albums/v420/Creamuk/RC%20car%20parts/IMG_8135.jpg

sly
15-12-2011, 09:57 PM
Awesome work Noel,
http://i266.photobucket.com/albums/ii249/slymonuk/IMAG0201-1.jpg

losichris
15-12-2011, 10:02 PM
looks nice that, what cups/buckles you using there?

sly
15-12-2011, 10:11 PM
looks nice that, what cups/buckles you using there?

Schumacher balls and cups as the durango ones are not very good, and the turnbuckles are 3racing titanium.

losichris
15-12-2011, 10:50 PM
Schumacher balls and cups as the durango ones are not very good, and the turnbuckles are 3racing titanium.

awful aint they!!

bigred5765
15-12-2011, 11:02 PM
if you want some really really good ones get the schumacher mi4 ones CLICKY (http://www.racing-cars.com/pp/Old_Cars_and_Parts/Mi-4/U3500.html)

Cream
15-12-2011, 11:46 PM
First post updates with all relevant information...

Origineelreclamebord
16-12-2011, 06:46 AM
This looks absolutely ACE! :woot: I better save some money for this. So are you also going to do a rear one? I bet the car looks even better with front and rear carbon towers :thumbsup:

Big G
16-12-2011, 10:04 AM
any chance of black alloy? :D

Cream
16-12-2011, 01:59 PM
any chance of black alloy? :D


Only if you spray it ;)

Origineelreclamebord
17-12-2011, 09:57 AM
Only if you spray it ;)

I think it would be cool to have them anodized in the same champagne colour as the chassis plate (Not orange as the spacers/shims for adjusting the height of the inside ball connector are orange as stock) :)

Regardless of that, the more I look at them, the more I want them! :lol:

mark christopher
17-12-2011, 11:40 AM
any chance of black alloy? :D
why not show a work of art?

Flame56mx
18-12-2011, 11:01 AM
Order placed, payment sent..http://www.rctech.net/forum/classic_images/smilies/nod.gif

Now, how about some rear link mounts, so we can get rid of the ones on the trans case..;)

Cream
18-12-2011, 12:53 PM
Order placed, payment sent..http://www.rctech.net/forum/classic_images/smilies/nod.gif

Now, how about some rear link mounts, so we can get rid of the ones on the trans case..;)


Packed ready for posting in about 1 hr.

AmiSMB
18-12-2011, 02:00 PM
That is speedy work there Noel :thumbsup: ! Is your PO open on a Sunday:eh?:?

Flame56mx
18-12-2011, 04:15 PM
Packed ready for posting in about 1 hr.

Appreciate the quick turn around, you must have some great employees working for you, that would provide that type of service on weekends..lol
--Thanks

Cream
18-12-2011, 05:03 PM
That is speedy work there Noel :thumbsup: ! Is your PO open on a Sunday:eh?:?


Yep, 12pm till 3pm. They call it E-bay hours :D

Andrew Twigger
18-12-2011, 05:10 PM
Is mine en route Noel?

Thanks

Cream
18-12-2011, 05:27 PM
Is mine en route Noel?

Thanks

Yeah, yours was sent on the 16th bud, You should of had it by now?

But weird Christmas post, hopefully you'll have it tomorrow. Anyone that has ordered one has now been posted.

AmiSMB
19-12-2011, 04:15 PM
Yeah, yours was sent on the 16th bud, You should of had it by now?

But weird Christmas post, hopefully you'll have it tomorrow. Anyone that has ordered one has now been posted.

Looking forward to receiving mine this week then :)

ronsand
19-12-2011, 05:51 PM
Did you get mine sent?

Regards Ronny
Norway

Cream
19-12-2011, 06:23 PM
Did you get mine sent?

Regards Ronny
Norway


Sent 18th of December.

Cream
19-12-2011, 06:26 PM
Looking forward to receiving mine this week then :)


Again your's where sent on the 16th. Usually they come next day. So a little concerned you haven't had it yet. Although I guess you can't expect too much so close to Christmas.

AmiSMB
19-12-2011, 06:46 PM
Do not worry I made a purchase from MB models and it was sent on the 15th and only arrived today! Signed for and everything!

ronsand
19-12-2011, 09:51 PM
Sent 18th of December.

Super

Looking forward to put it to use.

Ronny

dirk702
22-12-2011, 05:10 PM
Dear Cream, maybe something to be made by you ?
You made these also for the TLR 22 !

http://www.oople.com/forums/showthread.php?t=88649

Cream
23-12-2011, 12:08 AM
SWEENO I can't send you private messages, I think you have them turned off. But in reply to your PM.

I belive with the current exchange rate it works out to $55.65 for the full set and recorded delivery to the USA.

Rears are not even in development yet, So could be some time. I want to make something worth buying :)

Regards
Noel Grundy

Cream
29-12-2011, 12:33 AM
Here's what comes in he kit.

http://img.photobucket.com/albums/v420/Creamuk/RC%20car%20parts/IMG_8250.jpg

TonyM
29-12-2011, 11:41 AM
Thanks Noel - got mine in time for Xmas. As always, the quality is superb.

Bring on the rear tower!

sly
29-12-2011, 11:48 AM
Thanks Noel - got mine in time for Xmas. As always, the quality is superb.

Bring on the rear tower!

Tony. I'll email you the prototype picture.:woot:

lockmouth
29-12-2011, 05:18 PM
Thanks Noel - got mine in time for Xmas. As always, the quality is superb.

Bring on the rear tower!


+100.... The front tower is so bad azz, I got to have a rear tower to match :thumbsup:

hotrodchris
30-12-2011, 03:27 PM
Noel have you still got some 210 front towers left?

Cream
30-12-2011, 03:43 PM
Noel have you still got some 210 front towers left?


Yes mate, I ordered ar large batch of towers.

hotrodchris
30-12-2011, 03:49 PM
payment on it's way Noel!:thumbsup:

Next month the battery weights Me thinks!:thumbsup:

Cream
30-12-2011, 09:04 PM
payment on it's way Noel!:thumbsup:

Next month the battery weights Me thinks!:thumbsup:


I'll have to get machining then, As I've run out of the weights :eh?:

hotrodchris
04-01-2012, 05:38 PM
Thanks Noel
210 Front Carbon Tower and Ally bits turned up today, can't wait to fit it and get it on the track!:thumbsup:

ConceptRacing
10-01-2012, 09:02 PM
Thanks Noel, parts turned up today as promised, awesome looking bits, well worth the pennies, Cheers.

lockmouth
10-01-2012, 10:40 PM
What's the word on the rear tower?

Cream
10-01-2012, 11:55 PM
What's the word on the rear tower?

Nothing at the moment.

lockmouth
11-01-2012, 05:22 PM
Nothing at the moment.

Ok, put me down for one when you get around to it :thumbsup:

Cream
25-01-2012, 08:01 PM
Part of my latest batch, These should be on there way to America tomorrow :thumbsup:

http://img.photobucket.com/albums/v420/Creamuk/RC%20car%20parts/IMG_8501small.jpg

lockmouth
26-01-2012, 06:43 PM
Part of my latest batch, These should be on there way to America tomorrow :thumbsup:

http://img.photobucket.com/albums/v420/Creamuk/RC%20car%20parts/IMG_8501small.jpg

Who will be stocking your stuff state side?

Cream
26-01-2012, 06:48 PM
Who will be stocking your stuff state side?


I'm awaiting payment, But I think people will be suprised :thumbsup:

Want to wait till I have the money untill I say, Save any embarrassment on any side ;)

Cream
30-01-2012, 12:02 AM
Very proud to announce that these will soon be available in the USA via http://www.tresrey-usa.com/dex210-tresrey-parts/

Thankyou to David Konechne for this initial order, I hope for both of us it works out well. :thumbsup:

hotrodchris
30-01-2012, 06:04 PM
Good Luck to you Noel hope it works out!
Must say that had another driver flip right in front of me yesterday and if it hadn't been for the 210 front tower with ally bits on my car i think it would have finished my race.:thumbsup:

konich
02-02-2012, 02:38 AM
Tresrey USA is happy to have these available so if you're in the US or Canada we can get you taken care of. Thanks again to Noel for making this happen! :thumbsup:

Cream
15-02-2012, 03:33 PM
Currently out of stock of the Aluminium section, But the towers are still available. Mounts should be back in stock by weekend.

hottuna
15-02-2012, 05:10 PM
Can confirm it's a perfect fit and looks really great :thumbsup:
Well done Noel!

Cream
17-02-2012, 12:43 PM
Back in stock as promised.

Cream
21-02-2012, 12:50 AM
Now available in France Via http://boutique.m2d-shop.fr


http://boutique.m2d-shop.fr/advanced_search_result.php?keywords=CREAM


Along with the under servo weights and battery retaining weights.

Cream
29-03-2012, 02:06 PM
Another large batch of these ready today.


Was nice watching my bling fly round in the Sunshine at Southport last Sunday :thumbsup:

hottuna
13-04-2012, 09:21 PM
8-Racing (http://www.redrc.net/2012/04/8-racing-dex210-front-shock-tower-v2/) now copying your product Cream. What we say, second place is the first loser :D

Go for Cream if you want the best :)

Aran
13-04-2012, 09:31 PM
i know id kick up a fuss Cream, might be worth a polite email :P

Cream
13-04-2012, 10:10 PM
i know id kick up a fuss Cream, might be worth a polite email :P


Polite... I think for now best bet is to say nothing.

pee vee
14-04-2012, 02:26 PM
where can you buy the cream ones?

Cream
14-04-2012, 03:03 PM
where can you buy the cream ones?

Just pm me bud.

pee vee
14-04-2012, 03:23 PM
cool, thanks!
will be in touch after payday

Cream
13-05-2012, 10:14 PM
Thankyou everyone for your orders. Little bump for those asking where the thread is :thumbsup:

Oh, and postage price update to reflect Royalmail price increases.:thumbdown:

DaHomie
25-05-2012, 10:01 PM
8-Racing (http://www.redrc.net/2012/04/8-racing-dex210-front-shock-tower-v2/) now copying your product Cream. What we say, second place is the first loser :D

Go for Cream if you want the best :)

Friend of mine took the option of going for the first loser ones... Now he has broken 3 4mm carbon towers, my advice is...

Stay with the winner, go for Cream Extreme quality!

Cheers!

Cream
30-10-2012, 09:17 AM
Well after release of yet another copy of this tower, I'm still very happy to say mine is still looking great value at £28.00

With Treserys retailing at £33.99
and Exotek having a RRP £37.99


Cream replacment towers being £13.00

Treserys retailing at £18.49

jo90
30-10-2012, 11:16 AM
Hiya. Are you able to make the ali parts in Orange or Black at all rather than the silver colour (DEX210 front tower camber mounts) ?

Cheers

Darren Boyle
30-10-2012, 12:10 PM
Hiya. Are you able to make the ali parts in Orange or Black at all rather than the silver colour (DEX210 front tower camber mounts) ?

Cheers

Glad someone else has realised that anodising does cost extra money (not to mention laser etching too)......

Cream
30-10-2012, 12:43 PM
Gald someone else has realised that anodising does cost extra money (not to mention laser etching too)......


Was that needed Darren?

Yes it does cost extra, and if you use a grade that corrodes easily I guess it's needed.
I choose to use better material and not add a colour that some may or may not want.

In addition to that, yes it may look a little more trick when you first put then on, See how trick they look after a few scratches.

Darren Boyle
30-10-2012, 01:45 PM
Was that needed Darren?

Yes it does cost extra, and if you use a grade that corrodes easily I guess it's needed.
I choose to use better material and not add a colour that some may or may not want.

In addition to that, yes it may look a little more trick when you first put then on, See how trick they look after a few scratches.

Noel, with respect, yes it is needed in my opinion, since every time a product comes out, that is anything like yours everyone else gets accused of copying (even in some cases if they showed off their ideas first!), despite as I have already written elsewhere, the original idea on towers with seperate alloy camber bases came from K-Factory as I pointed out a few weeks back.

Companies do copy each other yes, especially if an idea is good (all cars have four wheels at the end of the day, we will say that is copying next ;)) but when other brands add more in terms of anodising or etching or both it is unfair to constantly jump on a thread and insist yours are cheaper, better value and higher quality (without even knowing what grade material is used by others in some cases), I cannot speak about the Tresray "copies" of yours, but I know for a fact you have not seen the Exotek ones yet in the flesh, so how can comments be made about inferior quality materials?

Your products are superb, I am not knocking them at all, but so are many others though and competition in the market is great, you will never have the only product of a type in the market place if it is a good one, others will always attempt to make the same or similar.

If your mounts were anodised, then laser etched, then distributed through model shops and dealers all over the country (not just sold direct), I am sure they would be not too far off the price of the others too...

Not looking to argue with you, far from it, but the constant shouts of copying and comparing is really not needed.....

jo90
30-10-2012, 01:47 PM
hiya, thanks for your reply. I am aware anodising costs extra, wasn't a dig at the product (as you probably saw I asked 'ARE' you able to which i note you saw). Yep I agree, scratcing does mar a product.

OK, another 'stupid' question then. The ali you use, if you 'colour' it with a black marker, does the ink seem to hold on the metal ? (some markers don't and almost streak on them).

Point is I am in the market for this kind of front setup (and rear tower) and yes im a bit fickle, i like my bits colour coded :drool:

If they hold marker pen, i will 100% be purchasing (well..the GF will be for my xmas gift)

jo90
30-10-2012, 01:51 PM
PS for Darren, i am currently using Exotek items also (rear hub carriers, steering link, spring collars and shock bottoms) and all are excellent products as well.

Yes there is a tendancy of copying. In some respects it isn't even copying but actually that a main line manufacturer has parts tooled by another company who also sell under their own brand as well.

I guess its the finer changes, refinements etc that make them a companies product.

Will be in the market for spring cup's and servo posts this Xmas from Exotek also :woot:

Darren Boyle
30-10-2012, 01:53 PM
hiya, thanks for your reply. I am aware anodising costs extra, wasn't a dig at the product (as you probably saw I asked 'ARE' you able to which i note you saw). Yep I agree, scratcing does mar a product.

OK, another 'stupid' question then. The ali you use, if you 'colour' it with a black marker, does the ink seem to hold on the metal ? (some markers don't and almost streak on them).

Point is I am in the market for this kind of front setup (and rear tower) and yes im a bit fickle, i like my bits colour coded :drool:

If they hold marker pen, i will 100% be purchasing (well..the GF will be for my xmas gift)

I guess Noel will answer if his alloy will take the black ink (you may be able to get the mounts anodised locally) The Cream mounts are very high quality (:D) and in my opinion would look gtreat anodised as pherhaps a "PRO" version to satisfy theose who want colour

Another take on the DEX210 front tower is the one from Team SR (and these come with black alloy mounts too as standard -a nd pre-glued edges to the carbon tower which looks very trick) may be worth checking out also, they can be found on our website - www.xfactoryrc.co.uk (http://www.xfactoryrc.co.uk)

Darren Boyle
30-10-2012, 01:55 PM
PS for Darren, i am currently using Exotek items also (rear hub carriers, steering link, spring collars and shock bottoms) and all are excellent products as well.

Yes there is a tendancy of copying. In some respects it isn't even copying but actually that a main line manufacturer has parts tooled by another company who also sell under their own brand as well.

I guess its the finer changes, refinements etc that make them a companies product.

Will be in the market for spring cup's and servo posts this Xmas from Exotek also :woot:

I agree with those comments fully.....

Cream
30-10-2012, 02:08 PM
Noel, with respect, yes it is needed in my opinion, since every time a product comes out, that is anything like yours everyone else gets accused of copying (even in some cases if they showed off their ideas first!), despite as I have already written elsewhere, the original idea on towers with seperate alloy camber bases came from K-Factory as I pointed out a few weeks back.

Companies do copy each other yes, especially if an idea is good (all cars have four wheels at the end of the day, we will say that is copying next ;)) but when other brands add more in terms of anodising or etching or both it is unfair to constantly jump on a thread and insist yours are cheaper, better value and higher quality (without even knowing what grade material is used by others in some cases), I cannot speak about the Tresray "copies" of yours, but I know for a fact you have not seen the Exotek ones yet in the flesh, so how can comments be made about inferior quality materials?

Your products are superb, I am not knocking them at all, but so are many others though and competition in the market is great, you will never have the only product of a type in the market place if it is a good one, others will always attempt to make the same or similar.

If your mounts were anodised, then laser etched, then distributed through model shops and dealers all over the country (not just sold direct), I am sure they would be not too far off the price of the others too...

Not looking to argue with you, far from it, but the constant shouts of copying and comparing is really not needed.....


I didn't jump on a thread, This is a thread about my product. Also didn't say they where inferior material, I said I know mine is high grade material and lower grades may need anodising to stop corrosion.

As for the black marker, If you get a marker pen that does not rub off on other alloys them it should be fine on mine, and you can always touch it up if needed.



Anyway, if you would like to purchase the original product, Please feel free to PM me, as stated they are £28.00, I also do rear towers for £15.00.


Cheers
Noel

Darren Boyle
30-10-2012, 02:14 PM
I didn't jump on a thread, This is a thread about my product. Also didn't say they where inferior material, I said I know mine is high grade material and lower grades may need anodising to stop corrosion.

To be fair, this is not the only thread this topic has come up on now is it and it is in the open Durango forum and not an advertisers own forum...

"if you use a grade that corrodes easily" and "I choose to use better material" is implying in my eyes that materials used by others are inferior to that of yours.

Cream
30-10-2012, 02:22 PM
To be fair, this is not the only thread this topic has come up on now is it and it is in the open Durango forum and not an advertisers own forum...

"if you use a grade that corrodes easily" and "I choose to use better material" is implying in my eyes that materials used by others are inferior to that of yours.


I wrote that I used a grade that doesn't need anodizing. I was very picky about what grade I used, which is why I didn't make the B4 mounts out of aluminium at first, Untill I was happy with the grade I found.

and your right it's not the first time it's come up. It's the third, as this is the third time I've seen a product that has reproduced what I developed. Such is life.

Darren Boyle
30-10-2012, 02:30 PM
I wrote that I used a grade that doesn't need anodizing. I was very picky about what grade I used, which is why I didn't make the B4 mounts out of aluminium at first, Untill I was happy with the grade I found.

and your right it's not the first time it's come up. It's the third, as this is the third time I've seen a product that has reproduced what I developed. Such is life.

I recall, since when the first mounts for the B4 came out they were steel and there was a heated debate about those and the weight being in the "wrong" place (if there is such as thing), hence why i think the alloy ones were introduced by you

There have been several threads with comments like these (not all of them started about your products) - here is just one example - http://www.oople.com/forums/showthread.php?t=111236

I think RDRP felt the same when their brass rear mounts for the DEX210 were copied after they showed them 6 months before anyone else, but as I keep saying that is life, copying will always be there

Some great examples...
MIP CVD's - copied now by almost everyone
Schumacher Mini Spike - copied more than once
Brass front bulkheads by GHEA - now everyone makes them
and with all respect - all recent cars from Ansmann/Team C are a "copy" of somthing before them

Cream
30-10-2012, 02:42 PM
I recall, since when the first mounts for the B4 came out they were steel and there was a heated debate about those and the weight being in the "wrong" place (if there is such as thing), hence why i think the alloy ones were introduced by you

There have been several threads with comments like these (not all of them started about your products) - here is just one example - http://www.oople.com/forums/showthread.php?t=111236

I think RDRP felt the same when their brass rear mounts for the DEX210 were copied after they showed them 6 months before anyone else, but as I keep saying that is life, copying will always be there

Some great examples...
MIP CVD's - copied now by almost everyone
Schumacher Mini Spike - copied more than once
Brass front bulkheads by GHEA - now everyone makes them
and with all respect - all recent cars from Ansmann/Team C are a "copy" of somthing before them


Actually There was nothing wrong with the weight, but it's a good example as both you and Tony trashed the mounts even before they where produced. The ali ones where introduced after I found a material I was happy with and also to ease manufacture.
Most other products I produce are heavier versions of the original part. Other than the rear weight where I removed threads for ease of build and removed angles to add a little extra weight. Still don't think anyone else does that?

Darren Boyle
30-10-2012, 02:51 PM
Actually There was nothing wrong with the weight, but it's a good example as both you and Tony trashed the mounts even before they where produced. The ali ones where introduced after I found a material I was happy with and also to ease manufacture.

Never said there was and as for trashing them, I said they would be better in alloy, you obviuosly agreed since you then made them (and now all others since) in alloy and hence thats why we buy that great product from you and sell it with our own carbon tower, it is superb! (especially now it is in the right material for the job ;)) If steel was right, why no steel ones for the DEX? ;)


Most other products I produce are heavier versions of the original part. Other than the rear weight where I removed threads for ease of build and removed angles to add a little extra weight. Still don't think anyone else does that?

And as Jo90 rightly said its those fine touches that make the product your own from one company to another.

Not bashing you here Noel, I think your stuff is very good, just pointing out the facts......

Cream
30-10-2012, 02:55 PM
I think I'e explained the material, I've found a grade I'm happy with.


Also the DEX210 ones would be much heavier, Much like the brass ones from 8-racing.

Anyway. Think I've said what I want to say on the subject.

Darren Boyle
30-10-2012, 03:05 PM
I think I'e explained the material, I've found a grade I'm happy with.


Also the DEX210 ones would be much heavier, Much like the brass ones from 8-racing.

Anyway. Think I've said what I want to say on the subject.

Glad we agree then, alloy is the better material (in this case), everyone copies everyone else's ideas and all companies make a great range of products all individual in their own little way.

Extended lunch now over, back to work...

Welshy40
06-11-2012, 08:56 PM
After reading Darrens posts that has made my mind up, best quality product it is so Cream will be getting my business later this month. Cheers for that :thumbsup:

Cream
06-11-2012, 09:00 PM
After reading Darrens posts that has made my mind up, best quality product it is so Cream will be getting my business later this month. Cheers for that :thumbsup:
:wub

Darren Boyle
06-11-2012, 10:54 PM
After reading Darrens posts that has made my mind up, best quality product it is so Cream will be getting my business later this month. Cheers for that :thumbsup:

Like that makes any sense??? :confused:

Welshy40
07-11-2012, 11:16 AM
It does as you kept going so means it must be better.

Darren Boyle
07-11-2012, 12:10 PM
It does as you kept going so means it must be better. And that makes even less sense?? :confused::confused::confused:

One thing you may not know about me, I dont hint at things, if somthing IS better than somthing else I will say, if somthing is AS GOOD AS something esle I will say that too, dont recall saying any of that above and I dont give cryptic clues.....

To clarify, all of Noels Cream stuff is very good quality, never have said it is not, but so are all RDRP, Exotek, 8Racing, K-Factory, TeamSR and others products too, all very good in their own way..

av4625
07-11-2012, 06:02 PM
Darren to be fair welshy is doing that to annoy you and i dont blame him as that is not a very good way to go about anything! arguing with someone about their product on their own thread! i hav seen u say stuff about exotek and so on so i take it u sell it, their is no need to say stuff about other brands on this thread as this is about cream, its a bit like a companys website you dont want people talking about other brands on it as you want people to buy urs! ur trying to get people to buy the other brands and not cream and to be fair they pretty much did copy to bad he didnt hav copyright, and u said all companys copy thats y ther is copyright!

Darren Boyle
07-11-2012, 08:34 PM
Darren to be fair welshy is doing that to annoy you and i dont blame him as that is not a very good way to go about anything! arguing with someone about their product on their own thread! i hav seen u say stuff about exotek and so on so i take it u sell it, their is no need to say stuff about other brands on this thread as this is about cream, its a bit like a companys website you dont want people talking about other brands on it as you want people to buy urs! ur trying to get people to buy the other brands and not cream and to be fair they pretty much did copy to bad he didnt hav copyright, and u said all companys copy thats y ther is copyright!

Well then more fool Jamesm (welshy) since nothing has "annoyed" me.

You say it is their own thread, just wait a minute here, I access all threads via the "new posts" button on the top of the forum as I do many times daily and I am sure others do as well, this thread is in the open "Durango" forum (not a "Cream" fourm or specialist advertisers forum section, the title of the thread is simply "DEX210 carbon front tower/aluminium mounts" the thread title is NOT "CREAM DEX210 carbon front tower/aluminium mounts".

I was attracted to thread earlier last week when Noel posted that his product had been copied once more and the copy he referred to was in fact the Exotek version, you will see I had not posted anything in this thread before that accusation.

Yes indeed I do sell Exotek, in fact I do more than that, I distribute it in the UK and as such I am expecetd to back up and support the brand as with all our others if the need arises. Thier tower is not a copy of Cream, nor anyone elses, it is their own variant on a popular theme used now by many and as I have stated now many times if anyone is being copied it is in fact K-Factory who were first to do the alloy block/carbon tower design now many years ago for the B4, Noel only copied them.

I have never said that Exotek is better then Cream, nor that Cream is better than Exotek, or any of the other brands mentioned for that matter like RDRP, Team SR, 8 Racing etc etc, in fact if you read my commnets you will see that I have praised the quality of the Cream products at every oppurtunity.

Also, in my opinion it is unfair of Noel, to state on a public forum that his product is better quality (or in his words "I choose to use a better material") when he has not seen the quality of the others first hand, he has "assumed".

Yes Noels stuff is very good quality and in many cases it has been cheaper too (somtimes dearer), but to be fair I have pointed out, many of the others are laser etched and/or anodised too (which suits some and not all) and almost all of the other brnads are sold through distributors and then model shops across the country and not just direct from the supplier, which will always make them more expensive to buy. If Noel sold his to ditributors and then on to shops, his would not be as cheap as they are either....

Now I did not even realise that this thread was "Noels" at the time I first posted in it, hence if you read I put that he had "jumped on another thread", it was only when he said it was "his" thread that I realised and without it being in the title and the thread already being 7 pages long (I went straight to the last page) that was not obvious, and for that I apologise. On the other hand, many of us pay a great deal of money to Jimmy/Vicky each year for the priviledge of advertising on this forum and we have our own threads and sections to do so in, so "maybe" that is what Noel requires if he wants threads purely for promotion of his items only.

So all the talk of copying, if anyone else wishes to bring it up, please at least get your facts straight first on who is actually copying who (and yes RDRP did release the brass parts for the DEX210 first - Nov 11), the topic of quality, let customers who have the parts be the judge of that and if they feel that extra anodising or engraving etc is or is not what they want to pay extra for or not as they choose........

Cream
07-11-2012, 09:36 PM
Goodness me isn't this getting out of hand?

I stand by my original comments. In that they are a copy of what I produced. EVERY front tower that was made for the DEX210 prior to mine was a flat carbon sheet.

My comment about chosing to make it from "better material" was to do with anodizing not anyone elses product. I chose to make the mounts out of a high grade aluminium that resists corrosion better and is also very high tensile, meaning it is less likely to strip threads.

As for advertizing, I PM'ed Jimmy on a number of occasions, without reply, if it's any buisness of yours?

Brass part.. RDRP showed a rendered images of a direct copy of the original part with a brass render. Don't think that gives them the right to be the only ones producing the part.

Just so there is no confusion I'll up date the title to read 'Cream DEX210 carbon front tower/aluminium mounts (http://www.oople.com/forums/showthread.php?p=711443#post711443)'

Darren Boyle
07-11-2012, 10:15 PM
Goodness me isn't this getting out of hand?

I stand by my original comments. In that they are a copy of what I produced. EVERY front tower that was made for the DEX210 prior to mine was a flat carbon sheet.

My comment about chosing to make it from "better material" was to do with anodizing not anyone elses product. I chose to make the mounts out of a high grade aluminium that resists corrosion better and is also very high tensile, meaning it is less likely to strip threads.

As for advertizing, I PM'ed Jimmy on a number of occasions, without reply, if it's any buisness of yours?

Brass part.. RDRP showed a rendered images of a direct copy of the original part with a brass render. Don't think that gives them the right to be the only ones producing the part.

Just so there is no confusion I'll up date the title to read 'Cream DEX210 carbon front tower/aluminium mounts (http://www.oople.com/forums/showthread.php?p=711443#post711443)'

Noel, before getting too smug, go back and read post 117 of this thread, it is all yours and you have accused people of copying you, I would happily have kept this sort of thing private or by PM, but you started the accusations so let it not be me to be the one that is accused of starting this "he copied him" situation since it was you with your post, you brought Exotek into the thread forthe first time, not me advertising their brand, since you tried to make them look bad for being more expensive than you did you not..... I dont agree with what Tresray have done to you, (Blatantly ripping you off with an exact and direct copy after agreeing to distribute yours) I think it stinks, but please dont take it out on every other brand out there who makes a part like yours (wether it be before or after you).....

Getting out of hand?? not really imho, just sticking up for the facts and what is right and correcting the wrong assumptions some of you are making or being told...

To stand there and have the front "still" to call these a copy when the idea is "proven" not to be yours amazes me, just to admit the idea was in fact not yours several posts ago would have stopped it "getting out of hand" as you say. I dont think anyone will see you as a criminal or anything for admitting you got the idea from K-Factory, since you have as you rightly say improved on it (with your wrap around style) and made it avialable for other cars now, but stop trying to insist the idea is all yours and everyone else is copying it.........

Better material - so are you still saying that you "know" that "any" of the other manufacturers you refer to do not use the same high quality materials that also resist corrosion better etc for a fact then, simple answer is you dont know this fors sure, you do know your material is very good, but cannot be sure what others are using and assume it may be inferior, so how can you claim it?

Advertising, as an advertiser on oOple, paying to sell and advertise products on the forum I guess then yes it does affect me. My point though was that your thread had been started in an open area of the forum, which is free to dicuss by all rather than in an exclusive area which it is not.

RDRP Brass, again please, please check your facts to save yourself looking silly on this, I have already said, in the other thread, that "production samples" from RDRP were in circulation (actual parts not rendered images - I have pictures here on my PC fitted to a DEX210) from late last year (yes before anyone else) and not sure if you know or not, but the owner of RDRP (Michael Vollmer) was actually the designer of the DEX210, he created the parts for the car, all of them, so when it comes to making alternatives from other materials etc why oh why would he change the design, it would be saying he got the shape or dimensions wrong in the first place if he did, and not sure then how he can be accused of copying himself in the design of them, he created the original's?? No-one is saying no-one can make alternatives, but then does the same not apply to the front towers too..... You cant have the cake and eat it..

Cream
07-11-2012, 10:58 PM
Noel, before getting too smug, go back and read post 117 of this thread, it is all yours and you have accused people of copying you, I would happily have kept this sort of thing private or by PM, but you started the accusations so let it not be me to be the one that is accused of starting this "he copied him" situation since it was you with your post, you brought Exotek into the thread forthe first time, not me advertising their brand, since you tried to make them look bad for being more expensive than you did you not..... I dont agree with what Tresray have done to you, (Blatantly ripping you off with an exact and direct copy after agreeing to distribute yours) I think it stinks, but please dont take it out on every other brand out there who makes a part like yours (wether it be before or after you).....

Getting out of hand?? not really imho, just sticking up for the facts and what is right and correcting the wrong assumptions some of you are making or being told...

To stand there and have the front "still" to call these a copy when the idea is "proven" not to be yours amazes me, just to admit the idea was in fact not yours several posts ago would have stopped it "getting out of hand" as you say. I dont think anyone will see you as a criminal or anything for admitting you got the idea from K-Factory, since you have as you rightly say improved on it (with your wrap around style) and made it avialable for other cars now, but stop trying to insist the idea is all yours and everyone else is copying it.........

Better material - so are you still saying that you "know" that "any" of the other manufacturers you refer to do not use the same high quality materials that also resist corrosion better etc for a fact then, simple answer is you dont know this fors sure, you do know your material is very good, but cannot be sure what others are using and assume it may be inferior, so how can you claim it?

Advertising, as an advertiser on oOple, paying to sell and advertise products on the forum I guess then yes it does affect me. My point though was that your thread had been started in an open area of the forum, which is free to dicuss by all rather than in an exclusive area which it is not.

RDRP Brass, again please, please check your facts to save yourself looking silly on this, I have already said, in the other thread, that "production samples" from RDRP were in circulation (actual parts not rendered images - I have pictures here on my PC fitted to a DEX210) from late last year (yes before anyone else) and not sure if you know or not, but the owner of RDRP (Michael Vollmer) was actually the designer of the DEX210, he created the parts for the car, all of them, so when it comes to making alternatives from other materials etc why oh why would he change the design, it would be saying he got the shape or dimensions wrong in the first place if he did, and not sure then how he can be accused of copying himself in the design of them, he created the original's?? No-one is saying no-one can make alternatives, but then does the same not apply to the front towers too..... You cant have the cake and eat it..


Not quite sure where I'm getting smug?

Are they more expencive? Yes, that is what I pointed out on a thread that I started about my product. Yes I'm upset they have been copied. Would you not be?

Having said that people will make there own mind up if the others have copied what I have done.

I haven't made any claims about what others have made their products out of. I said and will do for another time that the material I chose has good corrosion resistance so doesn't need anodizing. Your the one that implied that I was saying their product was not.

RDRP, I stand corrected, so many companies names being mentioned I'm loosing track. They make the all ali front tower, Which if I wanted I could copy. Have I? No.


If you want to have a blobby fit about me not having an Advertising section that's up to you. I'll not worry about it untill Jimmy contacts me about it. After all it's his website.
As for your comments about me not having distributors etc. Again is that any of your concern? I do everything from developing to making to selling the products. Usually getting orders out the following day right up to midnight. I also have given disscount to distributors, Tresrey-usa being one of them. Look where that got me, and yourself for that matter.


Think I've covered evreything there. If not I'm sure you'll point it out.

Darren Boyle
07-11-2012, 11:14 PM
You acccuse the thread of dragging on, then keep coming back and adding another dig..... :mad:

Not quite sure where I'm getting smug?.
In your last three posts my friend....

Are they more expencive? Yes, that is what I pointed out. More expensive, but anodised and etched (round we go again) you admitted that costs more to do already....

People will make there own mind up if the others have copied what I have done. Indeed so just leave it rather than you did on post 117

I haven't made any claims about what others have made their products out of. I said and will do for another time that the material I chose has good corrosion resistance so doesn't need anodizing. Your the one that implied that I was saying their product was not. Changed your mind now then, please read what you wrote previous (before you edit any more of it)

RDRP, I stand corrected, so many companies names being mentioned I'm loosing track. They make the all ali front tower, Which if I wanted I could copy. Have I? No. A little pointless to mention, but again RDRP were accused (not by you I will add but one of your customers) of copying you on the brass hinge pin mounts, although they were first, as I have shown, more than once. I think an all alloy fornt tower is cool, why dont you do one too if you can?

If you want to have a blobby fit about me not having an Advertising section that's up to you. I'll not worry about it untill Jimmy contacts me about it. After all it's his website. No "blobby" fit here, but dont expect threads to be all yours with no other opinions allowed unless you pay for them.... ;)

As for your comments about me not having distributors etc. Again is that any of your concern? I do everything from developing to making to selling the products. Usually getting orders out the following day right up to midnight. Yes we all do that here too (and more), hence why I am still on oOple defending my brands at 11pm. You insist to mention you are cheaper, (you did it again in this last reply) compare apples with apples, you have one man/one company only profiting from your items, they "should" be the cheapest (by miles)

I also have given discount to distributors, Tresrey-usa being one of them. Look where that got me, and yourself for that matter. Not sure what you mean there I already said what I thought of Treray in respect of you (stuck up for you again), however regrads us we only ever stocked your items, promoted them and helped sell more then you possibly would have juts on your own, we also supplied you our towers at trade price so you could sell them too, not sure how that did not help in any way??

Goodness me, I have stuck up for your products ALL the way through this, I have not knocked them once, I have been nothing but fair in the points I have made throughout and you say I am the one having the blobby fit........ pot kettle springs to mind mate.

If you are happy, leave it there, let the public decide by what they choose to buy......

Cream
07-11-2012, 11:19 PM
Darren you know what, What ever. :yawn: Your the one that keeps replying.

I'll let the readers make their own mind up.

Darren Boyle
07-11-2012, 11:24 PM
Darren you know what, What ever. :yawn: Your the one that keeps replying. LOL, one more reply just for you then to add to yours ;) LOL

I'll let the readers make their own mind up. Woohoo we agree, I just said that above.......

av4625
07-11-2012, 11:26 PM
good luck dude :/ hes doing himself no favours

and to just clarify i said it was his thread well he started it was what i meant if you want to say something good about anouther brand start a thread dont bash some1 else in doing so in a thread they started or make a comparison thread for example "which DEX210 shocktower do u prefer" even make a poll or somefin!

Cream
07-11-2012, 11:28 PM
good luck dude :/ hes doing himself no favours

and to just clarify i said it was his thread well he started it was what i meant if you want to say something good about anouther brand start a thread dont bash some1 else in doing so in a thread they started or make a comparison thread for example "which DEX210 shocktower do u prefer" even make a poll or somefin!


Thankyou,

I was going to post something else but just can't be arsed.

av4625
07-11-2012, 11:31 PM
Thankyou,

I was going to post something else but just can't be arsed.

he says ur replying and then he does??????? wat lol

Darren Boyle
07-11-2012, 11:38 PM
good luck dude :/ hes doing himself no favours

and to just clarify i said it was his thread well he started it was what i meant if you want to say something good about anouther brand start a thread dont bash some1 else in doing so in a thread they started or make a comparison thread for example "which DEX210 shocktower do u prefer" even make a poll or somefin!

I think you miss the point completely with that comment. I have not said anywhere any one is better than any other (you are accusing me of that) I have said they are ALL very good, the accusations "came" (past tense now) from Noel at the time, I have not "bashed" Noels products anywhere (please show me if I have), it is not me who wants a "comparison poll", since it is not me who drew the comparisons in price and quality in the first place, read all the above and the previuos page if you dont believe me.......

Remember that this thread was dead until last week and had not been posted in for 5 months until Noels post (117) were the accusations started against a brand that we distribute, now put yourself in my shoes as a distributor and see if you would not do the same

Here is the post that started it all by Cream 1 week ago (over 5 months after the last reply) the same week the Exotek one was announced.....

"Well after release of yet another copy of this tower, I'm still very happy to say mine is still looking great value at £28.00

With Treserys retailing at £33.99
and Exotek having a RRP £37.99


Cream replacment towers being £13.00

Treserys retailing at £18.49"

Darren Boyle
07-11-2012, 11:41 PM
he says ur replying and then he does??????? wat lol It was a light hearted joke, hence why I put the ;) after it.

Again, just read if from the beginning, then see who accused who of what :yawn:

Cream
07-11-2012, 11:47 PM
I think you miss the point completely with that comment. I have not said anywhere any one is better than any other (you are accusing me of that) I have said they are ALL very good, the accusations "came" (past tense now) from Noel at the time, I have not "bashed" Noels products anywhere (please show me if I have), it is not me who wants a "comparison poll", since it is not me who drew the comparisons in price and quality, read all the above and previuos page if you dont believe me.......

Rememebr that this htread was dead until last week and had not been posted in for 5 months unitl Noels post (117) wwre the accusations started against a brand we distribute, now put yourself in my shoes as a dsitributor and see if you would not so the same

Here is the post that started it all by Cream 1 week ago (over 5 months afterthe last reply) the same week the Exotek lone was announced

"Well after release of yet another copy of this tower, I'm still very happy to say mine is still looking great value at £28.00

With Treserys retailing at £33.99
and Exotek having a RRP £37.99


Cream replacment towers being £13.00

Treserys retailing at £18.49"

LOL, I guess by that you think that means I've not been selling any :) Quite an assumption that for a thread that has 11,653 hits.

Maybe it's also partly down to this thread
http://www.oople.com/forums/showthread.php?t=104735
Which has another 2,287 hits.

Think we are done here.


Oh while I'm at it, What makes you think the few mounts I've sold to you have made the slightest difference to the amount I've sold. You really think my sales are that low.

Darren Boyle
07-11-2012, 11:52 PM
LOL, I guess by that you think that means I've not been selling any :) Quite an assumption that for a thread that has 11,653 hits.

Maybe it's also partly down to this thread
http://www.oople.com/forums/showthread.php?t=104735
Which has another 2,287 hits.

Think we are done here.

I have not assumed anything, I would guess and hope you have sold bucket loads, just to reassure you, I have not knocked them anyhwere

But I did not know it was a "greatest hits" competition LOL (maybe our banter has helped that to rise this last week, they do say any advertising is good advertising and your thread has been top of oOple most of the week and all of tonight)

But you did "resurrect" a dead thread with your comments :wub

Darren Boyle
07-11-2012, 11:55 PM
Oh while I'm at it, What makes you think the few mounts I've sold to you have made the slightest difference to the amount I've sold. You really think my sales are that low.

Sorry missed the little edit you did there...

I think we sold far more of your mounts than you sold of our towers, so best you leave that one there unless your wish is to get personal....

Cream
08-11-2012, 12:01 AM
Sorry missed the little edit you did there...

I think we sold far more of your mounts than you sold of our towers, so best you leave that one there unless your wish is to get personal....

Think it kind of already did get personal.

As you said I'm not a shop, don't want to be, I'm an engineer, I've not tried to sell your towers to any great extent.

Darren Boyle
08-11-2012, 12:04 AM
Think it kind of already did get personal. Not from me it has not, I have defended your product throughout all my posts just dont agree with some of your comments and how they were portrayed, but it is far from personal from me...

av4625
08-11-2012, 12:07 AM
Here is the post that started it all by Cream 1 week ago (over 5 months afterthe last reply) the same week the Exotek lone was announced

"Well after release of yet another copy of this tower, I'm still very happy to say mine is still looking great value at £28.00



well if thats wat he said u dont no its about exotek lol u hav no proof if ur quote is correct!

i think it should just be dropped now :) some people like his and some people like others like u said awesome!

Cream
08-11-2012, 12:09 AM
Not from me it has not, I have defended your product throughout all my posts just dont agree with some of your comments and how they wre portrayed, but it is far from personal from me...
No, how you portrayed them.

Lots of little digs in the last few posts. I'm sure others have noted them too. Feels like the B4 mount thread all over again. Very childish IMHO.


Any enough for tonight, I'm off to bed, busy day tomorrow. Sweet dreams.

Darren Boyle
08-11-2012, 12:13 AM
well if thats wat he said u dont no its about exotek lol u hav no proof if ur quote is correct!

i think it should just be dropped now :) some people like his and some people like others like u said awesome!

I do agree with you 100%. I will just add that with regards to what I have highlighted in bold, Noel did only refer to two towers, the Tresray and Exotek and the Tresay one had been out for a while and the Exotek one was only released last week (when the post was made) and as I did point out at the time (many posts ago now thanks to how this thread has exploded :cry:) the comments regards materials and quality etc were before an Exotek one had even been seen in the country, which was what annoyed me the most....

Darren Boyle
08-11-2012, 12:18 AM
No, how you portrayed them.

Lots of little digs in the last few posts. I'm sure others have noted them too. Feels like the B4 mount thread all over again. Very childish IMHO.


Any enough for tonight, I'm off to bed, busy day tomorrow. Sweet dreams.

6 post ago you accuse me of dragging it on, but as bad as I have been at keep repyling you are doing just the same.

B4 thread - I told you (as did Tony E) steel would be too heavy, and alloy would be better, that was the only thing I ever said back then and as already discussed (zillions of posts back now) you do make them in alloy now and no longer in steel, so I was not wrong....

Keep making the good stuff, its popularity is clear to see, but keep the accusations down a bit ref the copies etc.

Good luck and have a busy day tommorow ;)

Jordy
08-11-2012, 12:29 AM
This post is not meant to antagonise the situation further but try and bring it to a conclusion before things get said and relationships or reputations get damaged.

I've been reading this over the course of today with interest.

Cream has some valid points here: He came up with the design for the Durango Ali Mounts and carbon towers. However, the concept of Ali mounts & carbon towers existed before he designed them for the DEX210. Noels are a very good piece of kit, I know because I have them on both of my 210's!

One thing designers or engineers don't do that well is protect what they have designed. I would have expected that a patent on the design be registered which would have made it difficult for companies like 8 racing or Tresrey to copy it in the way they have. It won't make it impossible but you would have had some protection and recourse to compensation for infringement of copyright. You might have been able to allow them to manufacture under licence, meaning you got a % fee very time they sold one.

I've not seen the Exotek design and can't pass comment on this but it's not very often I stick up for Boyle but here it goes!

Having read the post a couple of times now, he is correct in saying that he has not questioned the quality of your product. Far from it, he has commended the quality on several occasions.

Secondly as the distributor of Exotek etc, he has the right to protect the brands that he represents. This is normal business! I'm in that position everyday as a Senior Manager in a large FMCG organisation. There are some of our products I disike but I still stick up for them when they are compared to our competitors!

I don't think that Boyle means any malice against Cream and this thread has started to get out of control, which is often the case in public forums.

I would hate to see either of them falling out over comments made on here. Both are respected in the RC Industry and this is really a fast way to lose that respect!

As I stated in the beginning of this post, it iis not intended to antagonise this discussion any further merely bring it to a close.

Cream
08-11-2012, 08:09 AM
I'll take it as it was ment The Dutchman, thankyou for your input.

I'd just like to point out that I've not trashed the other products, My comment about material was a direct reply to the anodizing question and the reason I don't anodize them I apoligize if it came over different. It had nothing to do with what material the others are made out of. As I don't know the grade the others are made out of.
My other comments where about price and the fact I belive the others are a direct copy of what I made over a year ago. People will make their own judgment call over those comments.

How I advertize or sell my products are of no concern of anyone else yet those point have been bought up.

Cream
02-03-2013, 04:18 PM
Quick bump for those asking from America. :thumbsup::wub