View Full Version : servo saver on my 210
jayst
20-10-2011, 06:29 PM
ive fitted a servo saver on my 210 , after takin out a gear set :(
http://i33.photobucket.com/albums/d96/jamic123/IMG_0127.jpg
gainsy
21-10-2011, 10:38 AM
Looks good, where can i get 1 from?
4_cell_racer
21-10-2011, 10:55 AM
Looks good, where can i get 1 from?
It looks like a kimbrough servo saver with the outer mounting points cut off :)
Most model shops or eBay stock them ;)
http://www.cmldistribution.co.uk/cml_category.php?catId=0000000015
mikeyscott
21-10-2011, 11:12 AM
What servo did you kill?
Bungleaio
21-10-2011, 01:10 PM
Its a Hitec servo and saver. He killed a savo low profile gearset at Coventry last weekend.
mikeyscott
21-10-2011, 01:13 PM
Easily done with a 1251 and it wouldn't be my first choice servo except in a 511 etc
4_cell_racer
21-10-2011, 01:15 PM
Easily done with a 1251 and it wouldn't be my first choice servo except in a 511 etc
Gulp! Hope mine lasts :(
mikeyscott
21-10-2011, 01:18 PM
Gulp! Hope mine lasts :(
Just my view.
1257 in mine at present.
mikeyscott
21-10-2011, 02:31 PM
I've seen a number stripped in a Cougar SV which is similar in it's direct steering
4_cell_racer
21-10-2011, 03:26 PM
Well I found and hacked a kimbrough saver up and now it's fitted to my 1251.
Will see how it goes tonight at my club meeting :thumbsup:
mikeyscott
21-10-2011, 03:28 PM
I have an Orion VDS 1009 and wouldn't mind finding out how "strong" they are etc.
jayst
22-10-2011, 06:21 PM
the servo saver was trick bit i think but i ran it 2day and it didnt work , had loads of wheel wobble . maybe a kinborough might be better .
Dazzler
22-10-2011, 06:24 PM
I think the trickbits one, is kimbrough in different packaging..
4_cell_racer
22-10-2011, 06:50 PM
the servo saver was trick bit i think but i ran it 2day and it didnt work , had loads of wheel wobble . maybe a kinborough might be better .
Ran mine last night with a savox 1251 and had some wheel wobble on the left wheel!
Was my first outing with the buggy and was changing the front a axles to get more steering so im going keep it on for now to see if the wobble goes ;)
mikeyscott
22-10-2011, 06:53 PM
Ran mine last night with a savox 1251 and had some wheel wobble on the left wheel!
Was my first outing with the buggy and was changing the front a axles to get more steering so im going keep it on for now to see if the wobble goes ;)
Moving them more inline I assume.
4_cell_racer
22-10-2011, 07:34 PM
Moving them more inline I assume.
How did you guess? Lol I had them trailing and struggled from major understeer :thumbdown: put them inline and it felt a lot better! Then changed the insert to the next one forward (from inline) and had loads of steering :D :thumbsup:
mikeyscott
22-10-2011, 07:37 PM
So ended up using insert 2?
4_cell_racer
22-10-2011, 07:45 PM
So ended up using insert 2?
Nope, insert 2 makes the axles inline (although I used them in my 2nd race) finished the night on the 1&3 inserts (with no.1 arrow pointing forward) :)
TonyM
23-10-2011, 05:01 PM
I was getting quite a bit of understeer at Southport today and I moved my steering form 0 to 1 then 2, then 3. I found the 2 setting was the best.
It's great to have the option to fine tune steering so quick and easy.
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.