PDA

View Full Version : trf201 springs


guinness
29-10-2011, 11:23 AM
my used 201 came with some tamy springs,
front: green,red,black
rear: red

what is the stiffness of the springs? i noticed that car like the 501/511 have same color. is there a difference between the two sets.
im trying to understand if my springs are the one from the 501 or the 201.
hope im clear lol :thumbsup:
thanx

Quantra
29-10-2011, 02:05 PM
I bought the 501x springs for my 201 (53974 & 53975). These are marked as red, yellow and blue (soft to stiff) for both front and rear.

i'm pretty sure the 201 front spring set (54221) includes brown, black and green springs... So not sure what ones you have...

Perhaps this spring chart can help you? http://www.petitrc.com/reglages/BuggySpringChart.pdf

guinness
29-10-2011, 02:52 PM
so seems that the front spring of the 201 are different then the rest.
brown 201 2.63lb brown 501 2.80lb
black 201 2.84lb black 501 2.90lb

cannot find the lb of the front yellow or blue springs.

wildwillydriver
29-10-2011, 05:01 PM
so seems that the front spring of the 201 are different then the rest.
brown 201 2.63lb brown 501 2.80lb
black 201 2.84lb black 501 2.90lb

cannot find the lb of the front yellow or blue springs.


Front yellow: 3.50lb
Front Blue: 3.80lb

Bye
WWD
:)

guinness
29-10-2011, 07:40 PM
thanx ,so to have the complete set what are the parts number that I would need ? Thank you again.

wildwillydriver
30-10-2011, 01:53 PM
thanx ,so to have the complete set what are the parts number that I would need ? Thank you again.

Rear 501x part #53975
Front 201 part #54221
Front 501x part #53974

Bye
WWD
:)

guinness
06-11-2011, 06:42 PM
dont want start a new thread for a simple question lol,
so here i go,
are the stock rear uprights 0 degrees or 0.5 ?? what different they make in the car handling? thanx

Jamie.T
06-11-2011, 07:13 PM
dont want start a new thread for a simple question lol,
so here i go,
are the stock rear uprights 0 degrees or 0.5 ?? what different they make in the car handling? thanx

Stock rear uprights are indeed 0 degree, i find running 0.5 or 1 degree settles the back down and keeps it in check (i.e, stops it coming around on and off power)

guinness
07-11-2011, 12:18 AM
are the 0.5 upright coming only made of aluminium??

wildwillydriver
07-11-2011, 11:08 AM
are the 0.5 upright coming only made of aluminium??

Yes. part #54245

WWD
:)

Chris
07-11-2011, 11:09 AM
are the 0.5 upright coming only made of aluminium??

The plastic upright are always 0 degree.

Junior Z
07-11-2011, 01:05 PM
Ressorts Avants = Front Springs
Ressorts Arrières = Rear Springs

http://mccdphotos.free.fr/archives/Ressorts%20Tamiya.jpg