PDA

View Full Version : Gear Input Driveshaft for 410


Lowie
02-11-2011, 06:38 PM
Dear folks,

when searching through the net, I found two parts, with a different part-number .. for the same job:

TDR310027 Team Durango Gear Input Driveshaft
and
TDR310116 Team Durango Driveshaft Gear Input (2.0mm)

What's the better of those two? My guess, because of the larger partnumber: 310116 will be an update-part .. but I'm not sure of that.
Any insight?
thx!

Andyp
02-11-2011, 06:48 PM
The first TD310027 without the 'R' is for the old style driveshafts with 1.5 pins

the second TD310116 without the 'R' is for the newer style with 2mm pins, the ones im sure you would want unless you have a really old car , it will be stamped 2mm on the main shaft if it takes 2mm pins .

Lowie
02-11-2011, 08:10 PM
thx, indeed makes sence.