PDA

View Full Version : production DEX408 running at worksop


mark christopher
06-11-2011, 05:10 PM
Seen today is the full production DEX408 and I have pictures to post :thumbsup:

Steven Forster
06-11-2011, 05:24 PM
Seen today is the full production DEX8 and I have pictures to post :thumbsup:

As in 1/8th electric buggy...........:confused:

badger5
06-11-2011, 06:03 PM
Let's see the pics then. Who was driving it, and how did it go?

MHeadling
06-11-2011, 06:12 PM
Captainlip will be jealous! :p

steve73
06-11-2011, 07:07 PM
Without photos the topic is as interest as every cp thread.......

AfroP
06-11-2011, 07:33 PM
As in 1/8th electric buggy...........:confused:

Yeah an electric 8th scale. Looks good

Andrew Twigger
06-11-2011, 07:41 PM
You may be more insterested to know who broke it! :D

mark christopher
06-11-2011, 07:42 PM
Still on way home and at hozzy tomoz for an op, if I get time tonight ill post pics . Does look very nice, had Tekin and 4 x saddle packs

captainlip
06-11-2011, 07:43 PM
Still on way home and at hozzy tomoz for an op, if I get time tonight ill post pics . Does look very nice, had Tekin and 4 x saddle packs


Mark you have me on pins! :thumbsup:

captainlip
06-11-2011, 07:48 PM
and 4 x saddle packs


sounds like I made a good choice to buy so many lipos :woot:

samd
06-11-2011, 07:55 PM
saddle packs?

captainlip
06-11-2011, 08:16 PM
saddle packs?


yes I bet it looked a bit messy in there! can take sticks or saddles, ive bought sticks

Adam Skelding
06-11-2011, 08:35 PM
yes I bet it looked a bit messy in there! can take sticks or saddles, ive bought sticks

Install is actually neater than sticks.
A lot less messy than the inside of your diff cases.
:D

wheelspin
06-11-2011, 08:43 PM
Install is actually neater than sticks.
A lot less messy than the inside of your diff cases.
:D

:thumbsup::thumbsup::thumbsup::thumbsup::thumbsup: :thumbsup:

captainlip
06-11-2011, 08:59 PM
Install is actually neater than sticks.
A lot less messy than the inside of your diff cases.
:D

I have another go with the 408 :thumbsup:

does this mean were close to the 408 being in the shops.?

mark christopher
06-11-2011, 09:14 PM
Double post

mark christopher
06-11-2011, 09:16 PM
Here you Go, you can thank Adam for allowing me to take pictures.

http://www.mark.christopher.btinternet.co.uk/Webpictures/DEX8/IMG_5927-copy.jpg




http://www.mark.christopher.btinternet.co.uk/Webpictures/DEX8/IMG_5933-copy.jpg


http://www.mark.christopher.btinternet.co.uk/Webpictures/DEX8/IMG_5934-copy.jpg


http://www.mark.christopher.btinternet.co.uk/Webpictures/DEX8/IMG_5935-copy.jpg

captainlip
06-11-2011, 09:33 PM
I like what youve done with those pictures :thumbsup:

sime46
06-11-2011, 09:39 PM
Was that one taken after Mr C had a play?

jonathan may
06-11-2011, 09:41 PM
that is nice when is the expected release date.

mark christopher
06-11-2011, 09:49 PM
Was that one taken after Mr C had a play?
yes :D clever camera angles :thumbsup:

captainlip
06-11-2011, 09:50 PM
yes :D clever camera angles :thumbsup:

pmsl what broke?

bodgit
06-11-2011, 09:51 PM
Going with saddles looks to be the best way to keep wiring short.

captainlip
06-11-2011, 09:57 PM
is the spur metal or plastic?

mark christopher
06-11-2011, 10:00 PM
I like what youve done with those pictures :thumbsup:

lol well you can send em all here and not post the pictures anywhere now :p

mark christopher
06-11-2011, 10:23 PM
pmsl what broke?
i supose the best answer i can give is, you had to be there! :p

captainlip
06-11-2011, 10:28 PM
I just hope with all these photos popping up were not far away from owning one.

after seeing the production layout I had to go and solder my saddle link wire up :D

mark christopher
06-11-2011, 10:31 PM
I just hope with all these photos popping up were not far away from owning one.

after seeing the production layout I had to go and solder my saddle link wire up :D

well worth you buying 4 x top stick packs then? and you wonder why you attract attention:woot:

captainlip
06-11-2011, 10:36 PM
well worth you buying 4 x top stick packs then? and you wonder why you attract attention:woot:

defo glad I bought the sitcks I meant saddle wire between the two stick packs

mark christopher
06-11-2011, 10:40 PM
defo glad I bought the sitcks I meant saddle wire between the two stick packs

oh a link wire then!!

Ross
06-11-2011, 10:47 PM
Look nice :).

Do you think it will do a 20/30 min final on one set of cell's, if not it doesn't look like a quick battery change :cry:

http://www.mark.christopher.btinternet.co.uk/Webpictures/DEX8/IMG_5933-copy.jpg

captainlip
06-11-2011, 10:49 PM
oh a link wire then!!

yeah my bad, mind went blank for a mo.

mark christopher
06-11-2011, 10:56 PM
Look nice :).

Do you think it will do a 20/30 min final on one set of cell's, if not it doesn't look like a quick battery change :cry:


as other elec rally x cars can make 20 mins i see no reason why this would not. though im sure the elec class will come up with suitable rules for final times

captainlip
06-11-2011, 11:07 PM
as other elec rally x cars can make 20 mins i see no reason why this would not. though im sure the elec class will come up with suitable rules for final times

totally agree, the more 8th EP coming out the sooner the we see heats and events being held.

I took the safe bet and just got 6500mah lipos but im sure normal 5000ish should do 15mins.

Dont forget your running 4 cell and not 2 cell, so in my case id have 13000mah to dispose of and a typical 5000mah lipo would obviously have 10000mah

jayst
06-11-2011, 11:30 PM
I think ur wrong there. U will have 4s with 6500 mah capacity.

bigred5765
06-11-2011, 11:44 PM
depens how he wires them up doesnt it , he could have 4s at 6500mah or 2s at 13000mah

jayst
06-11-2011, 11:47 PM
4s would be the way i would wire it up

tobamiester
06-11-2011, 11:52 PM
depens how he wires them up doesnt it , he could have 4s at 6500mah or 2s at 13000mah

2s won't power that T8 motor, so its gotta be 4s.

I'm wondering if this car is light enough (I bet is not much heavier than a Losi SCTE) to put a Pro-4 4600kv motor in it, if so, you could run 2s wired in parallel for huge runtime. That would be pretty cool..

Origineelreclamebord
07-11-2011, 08:07 AM
It looks nice alright, but apart from electronics instead of a cylinder head poking through the body, what's different on this car? Different chassis plate, sidepods, spur and slipper, other chassis parts as well perhaps? I'd love to see a list of things that are developed/changed specifically for the DEX408 :p

mark christopher
07-11-2011, 08:49 AM
It's stock front and rear ends, no slipper.

captainlip
07-11-2011, 09:05 AM
The price of this should be nowhere near the dnx408 as the chassis is simple and not complex like the nitro version I'd doesn't have engine mounts, two servo mounts, brakes either side of the mid spur.

If it's anywhere near the dnx408 price you know Durango are milking us.

Candyman
07-11-2011, 12:53 PM
I would expect it to be the same, or maybe upto £40 less than the nitro version. Seems to be the trend with all other manufacturers that have a nitro and electric 8th out.

bigred5765
07-11-2011, 01:19 PM
2s won't power that T8 motor, so its gotta be 4s.

I'm wondering if this car is light enough (I bet is not much heavier than a Losi SCTE) to put a Pro-4 4600kv motor in it, if so, you could run 2s wired in parallel for huge runtime. That would be pretty cool..

im not sure catlip said he was using a t8??

captainlip
07-11-2011, 01:27 PM
im waiting on a T8 2050kv

bigred5765
07-11-2011, 03:28 PM
4s it'll have to be then and no 13000mah for you young man

captainlip
07-11-2011, 03:31 PM
4s it'll have to be then and no 13000mah for you young man

im running 2x 2cell 6500mah

eyeayen
07-11-2011, 04:41 PM
The price of this should be nowhere near the dnx408 as the chassis is simple and not complex like the nitro version I'd doesn't have engine mounts, two servo mounts, brakes either side of the mid spur.

If it's anywhere near the dnx408 price you know Durango are milking us.

The manufacturer also has to put the development costs into the kit, as the Electric is a less known factor as opposed to the Nitro this may have resulted in more extensive R&D than previous. Also they need to take into account the market, while the nitro class is already very established the electric class isn't, therefore I wouldn't expect it to be cheaper, it would be nice if it is but I wouldn't get your hopes up.

badger5
07-11-2011, 07:39 PM
The manufacturer also has to put the development costs into the kit, as the Electric is a less known factor as opposed to the Nitro this may have resulted in more extensive R&D than previous. Also they need to take into account the market, while the nitro class is already very established the electric class isn't, therefore I wouldn't expect it to be cheaper, it would be nice if it is but I wouldn't get your hopes up.

Not sure I agree with that, as most of the R&D has already been done with the DNX. The only parts that are different are the chassis, spur gear, centre shafts and plastics for the electronics, the rest is the same. The only reason that the cost will not be reduced is the lower production runs of some of the components, but in the big picture all of these kits are low production volumes.

mark christopher
07-11-2011, 09:08 PM
The price of this should be nowhere near the dnx408 as the chassis is simple and not complex like the nitro version I'd doesn't have engine mounts, two servo mounts, brakes either side of the mid spur.

If it's anywhere near the dnx408 price you know Durango are milking us.


ok so what do you bolt your motor to?
what holds you cells in?
what do you mount your speedo too?
guess if its same price and your being "milked" then you will have 4 new lipos to sell:confused:

captainlip
07-11-2011, 09:11 PM
ok so what do you bolt your motor to?
what holds you cells in?
what do you mount your speedo too?
guess idf its same price and your being "milked" then you will have 4 new lipos to cell:confused:

well lets see some prices and dates then, its time for durango to shine!

captainlip
08-11-2011, 01:11 PM
You don't help yourself, do you?



its just banter :D I talk sense really, make sense, great seller feedback, sell good bearing kits, and I make oople fun to read.

people are jealous of my oople fame :D

Adam Skelding
08-11-2011, 01:15 PM
Right
This is aimed directly at Mark and Captainlip.

Stop posting utter drivel in this section, use the forum as it's supposed to be used, sharing information and tips between like minded people NOT just insulting each other like kids in the playground.

You should both now better.

Carry on and I'll BAN you both from posting in the TD forum... Simples..

It's your choice.
:mad:

samd
08-11-2011, 01:24 PM
Handbags out!:D

jimmy
08-11-2011, 01:46 PM
http://www.susyflory.com/wp-content/uploads/2010/02/Tumbleweed.jpg

mark christopher
08-11-2011, 02:59 PM
Adam
I applogise to you and Durango for my part, hopefully he wont post any more crap that i feel i need to have a pop. ill just start reporting his posts to get em removed.
I think to claim Durango are "milking" him before he even knows a price is out of order!

captainlip
08-11-2011, 03:07 PM
Adam
I applogise to you and Durango for my part, hopefully he wont post any more crap that i feel i need to have a pop. ill just start reporting his posts to get em removed.
I think to claim Durango are "milking" him before he even knows a price is out of order!

dont go sucking up to adam, you knew full well what touble you were trying to cause

yet again somebody cannot understand a simple quote, I never said they are, but I said if its near the DNX408 price then yes that would be milking us do to the more "simple" chassis and less machined parts etc etc

how you cannot read and compute simple statements is beyond me.

im really looking forward to the dex408 and people who arent even considering buying it are just acting clowns and provoking arguments, their either illerterate or trouble causing, most are the latter.

cjm_2008
08-11-2011, 08:14 PM
Arguing on the Internet is a lot like a broken pencil.


Pointless.

eyeayen
09-11-2011, 10:27 AM
I've got to agree with what Adam said, I'm interested in this car but this thread is just full of stuff I don't need or want to read but I have to trawl through it all to find the bits I want and it's more than annoying having to read it. There's no need for any of it, it's not banter, it's not funny it's just a waste of everyone's time.

David1976
25-11-2011, 02:56 PM
I am really looking forward to this. Are there any more production photo's? Having seen the teaser picture for the Truggy I hope that doesn't mean this model will be delayed.

Chris Doughty
25-11-2011, 03:10 PM
David, we work on MANY projects all in Parallel at TD.

Teaser photos of the DNX408T do not mean that things have stopped on the DEX408
More details of the DEX408 are being worked on right now to show the public. :thumbsup:

captainlip
25-11-2011, 03:13 PM
Durango are please to hear that because their timescale works in months between each update I decided on something different for 2012 and will not be given teasers then not hear anything for months, tired of that nonsense!

badger5
26-11-2011, 05:02 AM
It seems that TD have sorted out the prices for the new DEX408 then, on their website the price is listed at £388 0r US$549. :thumbsup:
So a fair bit cheaper than the DNX then, and to be honest makes this buggy pretty appealing as £100 buys quite a bit of stuff or spares.
Lets hope it's out before xmas then.

captainlip
26-11-2011, 07:46 PM
I take my comment back about the rip off prices, as advertised its a very tempting buggy

http://www.team-durango.com/part-info.php?partNo=TD102007

personally though im still happy I chose the serpent, but well done durango for bringing a competative product.

CaveDweller
02-12-2011, 04:51 PM
Now we're getting somewhere!
http://www.team-durango.com/race-cars/dex408/

captainlip
02-12-2011, 06:42 PM
I has some neat features but there just novelties, personally glad I chose the serpent.

this looks sweet though.

mark christopher
02-12-2011, 07:27 PM
I has some neat features but there just novelties, personally glad I chose the serpent.

this looks sweet though.
lets see which one getmost driver suport and results then!

sounds like your thinking you picked the wrong one and your back pedling! :woot:

captainlip
02-12-2011, 07:39 PM
lets see which one getmost driver suport and results then!

sounds like your thinking you picked the wrong one and your back pedling! :woot:


Ive always liked durangos bling and well machined and finished parts.

but the kit page boasts of velcro straps giving all the different options, and a ESC mount thats trimmable, yet nice but think they should have promoted other more effective more notable parts. thats my 2p worth and im sure other will agree.

im very happy with the serpent and am currently enjoying the build which is going together brilliantly.

Im glad I went serpent but thats because this suits what I want from a buggy more.

looking forward to seeing a durango in the flesh though.

mark christopher
02-12-2011, 08:24 PM
Ive always liked durangos bling and well machined and finished parts.

but the kit page boasts of velcro straps giving all the different options, and a ESC mount thats trimmable, yet nice but think they should have promoted other more effective more notable parts. thats my 2p worth and im sure other will agree.

im very happy with the serpent and am currently enjoying the build which is going together brilliantly.

Im glad I went serpent but thats because this suits what I want from a buggy more.

looking forward to seeing a durango in the flesh though.

seen the rango and it looks good but not seen the snake, end of day both look good and will perform ok