View Full Version : DEX 210 spur gear
Chris119
13-11-2011, 09:31 PM
Does anyone know if anything else will fit the 210 for spur gears? I find it odd Durango only makes one size. I heard of guys reaming out a Associated spur.
Thanks
mikeyscott
13-11-2011, 09:41 PM
RW Racing
[email protected]
http://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=durango+rw&_sacat=See-All-Categories
Big G
13-11-2011, 10:53 PM
a per above post. RW make a few other sizes
OneKiwi
14-11-2011, 07:10 AM
What sizes would people usually get?
Would they be of any benifit in the 410?
triplesix
14-11-2011, 08:21 AM
Someone told me, Cougar SV spur gears fit like a glove. Can anyone confirm this?
Yes, it works perfectly.:lol:
triplesix
14-11-2011, 09:58 AM
:thumbsup:
What about the slipper pads? Do I need Cougar parts, too?
AmiSMB
14-11-2011, 11:18 AM
I use the RW racing spur gears and the Durango ones can be used in the 410 as well. Using the 83 in the 210 helps so that you do not have to use a big pinions on 6.5 and 7.5 motors on big tracks.
:thumbsup:
What about the slipper pads? Do I need Cougar parts, too?
No you don't have to, you can use the one from Durango, actually Durango, Cougar all use the same slipper sizes as AE B4, you may want to give that a try too.
triplesix
14-11-2011, 02:31 PM
No you don't have to, you can use the one from Durango, actually Durango, Cougar all use the same slipper sizes as AE B4, you may want to give that a try too.
Now that's what I call useful information!
Will try the ones from my B4.1
Thank you!
Chris119
14-11-2011, 05:26 PM
Thanks guys!
AE pads will fit however the spur hole is too small for the 210. I will try an SV spur.
Thanks guys!
AE pads will fit however the spur hole is too small for the 210. I will try an SV spur.
Just to make it clear, the spur from the SV will fit perfectly, with that, you can use either the original Durango slipper pads or the one from AE. However, the spur from AE will not fit the 210, hope that helps.:)
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.