PDA

View Full Version : 410r battery fitment


jonathan may
17-11-2011, 07:45 PM
i have got a 410r off ebay what is the right way to fit the battrty do you take the spur off or ram them in the side.

Dazzler
17-11-2011, 07:46 PM
Spur out, no ramming required...

mattr
17-11-2011, 07:47 PM
if you can ram them in the side, you've already broken something.

Spur comes off. There are plenty of videos around, even some on the durango website.

Think there are some instructions in the manual too.

jonathan may
17-11-2011, 07:47 PM
so is that the correct way spur out

shark
17-11-2011, 07:49 PM
Yep sure is .

Dazzler
17-11-2011, 07:49 PM
Yes... Spare a min of your life to watch a video..

http://www.youtube.com/watch?v=ICFAazuVxHg&feature=youtube_gdata_player

jonathan may
17-11-2011, 07:51 PM
ok just seemed a bit wered to take the spur out to change cells

mattr
17-11-2011, 08:23 PM
Not really, its designed to come out.

RC John
17-11-2011, 10:11 PM
ok just seemed a bit wered to take the spur out to change cells

I won't seem wierd after you've done it a few dozen times :)

afun1979
18-11-2011, 09:27 PM
If changing a set of batteries is causing potential problems i'd have read through the manual (TD website) so that you don't get caught out with anything while at a meeting.
Durango have a "different" way of doing things compared to other manufacturers and some of their designs/ideas may not be obvious to everyone.

TonyM
19-11-2011, 12:49 AM
When you think about it, pulling out two pins is just a couple of seconds, most battery retainers require something to be screwed, which takes longer.

Don't forget to use a Dremmel (or similar) to taper the front of the pins so they are easier to insert.

wacattack
19-11-2011, 08:57 AM
ok just seemed a bit wered to take the spur out to change cells

More weird than "ramming in the side"? :D

jkclifford
19-11-2011, 02:02 PM
if fitting the cells has confused you, the correct shimming of the diff will blow your mind, probably best to put it back on ebay and save your self some grief.

Big G
19-11-2011, 03:09 PM
I don't actually remove mine anymore. with the 2 clips out the spur lifts up enough for me to slip the 2 pack in and out. the driveshafts remain in the cups on the layshaft. once you've done if a few times it's easy and quick.