PDA

View Full Version : Schumacher Rear Wheels on TRF201?


wildwillydriver
19-11-2011, 05:40 PM
Just a quick question, Schumacher rear wheels fit ok on TRF201?
I can see by pictures that they are with pin like Tamiya and AE ones.

Thanks for your help.
WWD
:)

Jamesk
19-11-2011, 06:01 PM
The pin slot is to small for the tamiya pin, but they can filled out to fit with care and a steady hand.

jk

fastinfastout
19-11-2011, 10:27 PM
just replace the tamiya wheel pin with a smaller diameter one from AE or schumacher.

F1END
20-11-2011, 01:01 PM
just replace the tamiya wheel pin with a smaller diameter one from AE or schumacher.

I have used Schumacher wheels on my DB01 using the Tamiya pins, just takes a little bit of force to get them on.

Jan Larsen
20-11-2011, 01:05 PM
Yes, just line up the pin with the groove in the wheel and screw the nut on to push the wheel on the pin.

wildwillydriver
21-11-2011, 10:48 AM
I have used Schumacher wheels on my DB01 using the Tamiya pins, just takes a little bit of force to get them on.

Yes, just line up the pin with the groove in the wheel and screw the nut on to push the wheel on the pin.

I did it with just a little push/effort they works wonder! :thumbsup:

Thanks a lot for your reply!
Bye
WWD
:)