View Full Version : Novak Brushless gearing for 501x
Belsten
26-02-2008, 08:46 PM
Hi can anyone give me a rough starting point for gearing with a 5.5L in my 501X please ?
Sensory Overload
26-02-2008, 09:38 PM
Was using 16/96 on an Orion/Peak 5.5 (16/87 on a big outdoor track) - no problems
BushyAR15
26-02-2008, 10:55 PM
I run a 17t with the stock spur on the standard spur for the non-worlds, 96T I think....
I run a GTB w/5.5r
501X Driver
27-02-2008, 12:03 AM
I am running a GTB and a 4.5L with a 19/87 on dirt off-road track is tight and 120' x 65'. Speedo after 5 min. = 120 and motor is 130.
Been running it for 3 months. Tried a 17 and temp went up to 160 on both maybe a little more on the motor.
SiR_Dave
27-02-2008, 02:29 AM
Hi can anyone give me a rough starting point for gearing with a 5.5L in my 501X please ?
Standard Kit( non-big pulley ) 96/19
Worlds Kit ( or Big Pulley ) 91/16
This is set up for a track that is 100 x 50 ft roughly;) with the 5.5L motor.. Just try to keep the overall final in the low to upper 11ish range and go up or down one tooth depending on the track size;)
Belsten
27-02-2008, 08:52 AM
Great stuff thanks for all your replies guys :thumbsup:
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.