View Full Version : Another DEX210 shell
Bugle
20-11-2011, 11:46 AM
Designed a DEX210 body, cab shape based off my DEX410 design obviously :D
Everyone complained that the original was too hard to paint, and that the poor little driver had massive blind spots :lol:
So this is easier to paint, and less sharp corners is less prone to cracking.
I still have to make the rear cover sections for mid motor, but it will be able to be used in any config with covers or just cut specifically for one of the mid motors or rear motor.
Was also going to put scoop cutting lines in those angled down bits at the front of the side pods to make them legal scoops if anyone actually needs them.
Made a similar wing to my usual one, just with a wider middle to clear the gear cover in rear motor mode.
Also made an undertray and a proper front bumper..
Some pics from sunday, thanks to Brooke for the action shots
http://bugleboyracing.com/dex210/dex210-stives-3.jpg
http://bugleboyracing.com/dex210/dex210-stives-1.jpg
http://bugleboyracing.com/dex210/dex210-stives-2.jpg
http://bugleboyracing.com/dex210/dex210-1.jpg
http://bugleboyracing.com/dex210/dex210-3.jpg
http://bugleboyracing.com/dex210/dex210-4.jpg
http://bugleboyracing.com/dex210/dex210-undertray.jpg
Chequered Flag Racing
20-11-2011, 01:03 PM
now all I need is a DEX210 to fit one of those :thumbsup:
pjs autos
20-11-2011, 01:30 PM
will get 1 wen i can get a car to put it on:thumbsup:
jamiekerr14
20-11-2011, 01:54 PM
Nice Idea, but I personally LOVE the stock shell has to be one of the best looking shells to date.
Danger mouse
20-11-2011, 02:26 PM
Love it, I would defiantly buy one these.
dirk702
20-11-2011, 10:01 PM
I like to order one and also one undertray !
Mitch269
21-11-2011, 04:06 AM
I also would love to have one of these how much and how do i order
Chequered Flag Racing
21-11-2011, 05:50 AM
I also would love to have one of these how much and how do i order
Best to PM Bugle
Have the DEX410 & Losi version from him and they take 10 to 14 days from Austrailia to the UK
Origineelreclamebord
21-11-2011, 08:00 AM
Nice Idea, but I personally LOVE the stock shell has to be one of the best looking shells to date.
+1, the DEX210 shell has to be one of the better and more original shells produced lately (no wonder if you see what chassis is underneath and around that shell). The only thing I might have done different would be the sidepods, but to keep them practical they really need to be pretty bulky.
Anyway, your shell looks nice as well. I wonder though if there will be any manufacturer to try out a body on this one that doesn't follow the shape of the current sidepods and has a cab fitted further backwards. It seems pretty impossible with the chassis Durango have built :lol:
Bugle
21-11-2011, 09:34 AM
Thanks for the comments!
Still a supply problem of the kits over there?
I'm planning on having the first batch ready at the same time I finally launch my website, which will have ordering. Should be early next week.
I might have a go at a rear cab, I have had some ideas about that :)
TDMAK
21-11-2011, 01:59 PM
What wheels are those?
Anibal Henriques
21-11-2011, 03:37 PM
What wheels are those?
Jconcepts RULUX for the B4:thumbsup:
jonmiller
24-11-2011, 07:46 PM
i too think the stock 210 shell is cool looking but man.....what a pig to paint!
all the td shells (well, the 1/8 n sc aren't too bad) have really recessed windows and vents which makes it a nightmare to cut designs in or around those areas.
so, nice1 bugle :D
mark christopher
24-11-2011, 08:16 PM
will the undertray fit the stock shell?
Bugle
25-11-2011, 01:49 PM
Yeah I like to let people mask windows however they like if they don't like my lines :thumbsup:, don't have a choice if the windows are recessed!
The undertray will fit with the standard shell, it fits the outline of the chassis closely.
gainsy
25-11-2011, 05:05 PM
Put me down for 1 please, very cool shell :thumbsup:
Bugle
29-11-2011, 11:38 AM
ok ready to pump some out, just needed more cowl bell :D
You could probably get away without the cowl for mid motor though if you only wanted to cut it for 1 configuration, and if the motor tabs don't poke out further than 6mm measured from a tangent from the point where the centre tab is. Every motor i've got looks like it should be ok.
http://bugleboyracing.com/dex210/dex210-cowlbell.jpg
http://bugleboyracing.com/dex210/dex210-7.jpg
jeffrey
29-11-2011, 12:03 PM
soo damm nice
bugle i love your work :drool:
and i can't wait until my body is here :)
grtz
Carlos69
29-11-2011, 12:13 PM
Must go faster with those black wheels.....:thumbsup:
jeffrey
29-11-2011, 12:20 PM
Must go faster with those black wheels.....:thumbsup:
yes black wheels are always faster and more stable :thumbsup:
second place is white wheels :)
black wheels FTW
Bugle
29-11-2011, 12:26 PM
Yeah, best way to deal with yellow kit wheels is to make them black :lol:
jeffrey
08-12-2011, 08:23 PM
today i paint the undertray :drool:
i hope i can do the body tomorrow morning, because others it will be next week :(
here a picture of the perfect fit undertray
http://img546.imageshack.us/img546/5779/img0077ux.jpg (http://imageshack.us/photo/my-images/546/img0077ux.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img832.imageshack.us/img832/3064/img0074lt.jpg (http://imageshack.us/photo/my-images/832/img0074lt.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
sorry for the bad pictures but if the bugle body is painted i will take some good pics.
love your work bugle, keep on doing that :thumbsup:
grtz jeffrey
OneKiwi
08-12-2011, 08:29 PM
Do you have them in production and selling yet?
dirk702
08-12-2011, 09:30 PM
Nice job Jeffrey ! ;)
Chequered Flag Racing
08-12-2011, 09:48 PM
now all I need is a DEX210 to fit one of those :thumbsup:
Still looking and soon as I'll be onto Bugle for a shell or two ;)
Bugle
09-12-2011, 07:01 AM
Hey everyone, yep i've got the DEX210 shells in production and finally got a web store going, currently with all my Durango and Losi bits, will be adding Associated soon, all my Associated stuff looks like it came from the 80's though :lol:.
Here's the link http://bugleboyracing.com/
If that package I sent to Jeffrey is anything to go by, postage is faster than ever during the christmas rush, only took 3 working days..
Awesome paint job Jeffrey, only person I know who would put that much effort into painting an undertray :thumbsup:
jeffrey
09-12-2011, 09:06 AM
If that package I sent to Jeffrey is anything to go by, postage is faster than ever during the christmas rush, only took 3 working days..
Awesome paint job Jeffrey, only person I know who would put that much effort into painting an undertray :thumbsup:
yeaahhh from australia to belgium in 3 days :thumbsup:
i cant wait that i painted the body because it look so damm sexy :)
Tomk26B4
09-12-2011, 10:08 PM
Any chance of some pics of the B4 and B44 shells you mentioned on your site? :thumbsup:
Bugle
10-12-2011, 10:20 AM
Here's the old school B4 & B44 bodies. I've got the B4 one in scooped or scoopless. Made it to suit both the +8mm and original chassis, just requires cutting an extra 4mm off each end to work with the original.
http://bugleboyracing.com/images/b4.jpg
http://bugleboyracing.com/images/b44.jpg
I also experimented with a forward cab version of the oldschool shell on the B4, it looks pretty ugly but I might try selling some anyway:lol:
I think the DEX210 style thing might work on the B4, I tried it a while back adapting the 410 shell to the B44 but didn't get very far, I don't think that'll work.
OneKiwi
10-12-2011, 06:20 PM
Now that in my eyes is not pretty, some cab foward like the bulldog would be intresting
Origineelreclamebord
10-12-2011, 06:39 PM
Here's the old school B4 & B44 bodies. I've got the B4 one in scooped or scoopless. Made it to suit both the +8mm and original chassis, just requires cutting an extra 4mm off each end to work with the original.
http://bugleboyracing.com/images/b4.jpg
http://bugleboyracing.com/images/b44.jpg
I also experimented with a forward cab version of the oldschool shell on the B4, it looks pretty ugly but I might try selling some anyway:lol:
I think the DEX210 style thing might work on the B4, I tried it a while back adapting the 410 shell to the B44 but didn't get very far, I don't think that'll work.
Ace! :thumbsup: Now if only those old school deep dished rear wheels could be added to the car :lol:
Bugle
11-12-2011, 02:35 AM
Could always make some old Yokie adaptors and run pink wheels :lol:
lcpvcce
11-12-2011, 02:37 AM
Great Job................:thumbsup:
Carlos69
17-12-2011, 07:08 PM
....if Vettle can find success naming his cars....
Bugle
18-12-2011, 09:50 AM
Yeah 'black betty' seemed to go alright today when I had a try, certainly went where I aimed it and jumps nicely. Now put a 5.5 in it.
jeffrey
21-02-2012, 09:36 PM
i finaly had some time to paint my bugle bodie :p
a shame after almost 2 months or so:lol:
here are some pics of the super nice products of bugle :thumbsup:
http://img441.imageshack.us/img441/7357/img0304np.jpg (http://imageshack.us/photo/my-images/441/img0304np.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
http://img28.imageshack.us/img28/7610/img0306xm.jpg (http://imageshack.us/photo/my-images/28/img0306xm.jpg/)
Uploaded with ImageShack.us (http://imageshack.us)
grtz jeffrey
dirk702
22-02-2012, 05:55 AM
Very nice paintjob again Jef ! :thumbsup:
Bugle
22-02-2012, 12:45 PM
Nice paint job Jeffrey, must be hard to find time with 37 cars to work on :thumbsup:
jeffrey
22-02-2012, 06:44 PM
Nice paint job Jeffrey, must be hard to find time with 37 cars to work on :thumbsup:
100% true mate :woot:
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.