View Full Version : What turn motor in a dex210
dobber
23-11-2011, 11:37 AM
What have you guys been putting in and why?
I was thinking of a 8.5t, short technical indoor circuit over winter but longer outside ones during summer :)
jamiekerr14
23-11-2011, 11:54 AM
8.5T should be about right Most+me run 7.5t for outdoors and indoors. But for small tight and technical 8.5T would be about right if its very small.
Chris-S
23-11-2011, 12:03 PM
7.5turn in mine with a 23t pinion. Plenty quick enough for indoors.
kayce
23-11-2011, 01:24 PM
What have you guys been putting in and why?
I was thinking of a 8.5t, short technical indoor circuit over winter but longer outside ones during summer :)
8.5 is a perfect 2wd motor for larger outdoor tracks, but even a 13.5 is plenty indoors IMHO
losichris
23-11-2011, 01:37 PM
im running a 6.5 indoors ( dont have anything else ) and its way too quick.
have turned the timing right down, think an 8.5 would be ideal!
neil_p
23-11-2011, 05:27 PM
Hi Duncan, I have ran both a 7.5 and 8.5 around SHRCCC and I found that the 8.5 was smoother and more driveable there. Hope that helps you mate.
Big G
23-11-2011, 05:55 PM
7.5 worked well for me :)
AmiSMB
24-11-2011, 07:54 AM
7.5T on 25 pinion 83 spur and then adjust turbo and boost accordingly to the track size.
Timee80
24-11-2011, 08:13 AM
Ive gone to slower motors and prefer the power delivery. 13.5t and 10.5t is what im using lately. Both with a bit of boost for more top end. 10.5t feels perfect for most tracks for me
chris_dono
24-11-2011, 09:20 AM
I used a 10.5 last time out as I didn't have anything quicker barring 4/4.5 turn motors !
I think a 7.5 would be perfect though
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.