View Full Version : 410v3
snige
28-11-2011, 09:36 AM
Hey lads I hope to be getting one in the next while just wondering what lipos fit in it (height and width) also what springs to get.?and is there any hop ups that are needed weight etc. Wha oil does people use in the gear diff is this kit oil ok or is lighter or heavier oil required
Thanks in advance
Big G
28-11-2011, 12:07 PM
I use the supplied diff oil - it works for me :)
kartstuffer
30-11-2011, 01:06 AM
Hey Nige
Does this mean I will have to get something else ?? Everyone`s gettin a rango now!!!
12.5 / 7 k diff oil
40 / 30 shock oil
Any saddles under 25mm or the Losi stubby.
& small esc & receiver.
captainlip
30-11-2011, 05:08 AM
I used 12.5k and 7k as best results.
you will need to reduce the size of your electrics.
snige
30-11-2011, 11:46 AM
I used 12.5k and 7k as best results.
you will need to reduce the size of your electrics.
I have a tekin rs to put in it hopefully should be ok.does the 12.5k go in the front diff and the7k in the rear?
ian h
30-11-2011, 11:49 AM
I have a tekin rs to put in it hopefully should be ok.does the 12.5k go in the front diff and the7k in the rear?
Yes it does mate.
snige
30-11-2011, 11:49 AM
Hey Nige
Does this mean I will have to get something else ?? Everyone`s gettin a rango now!!!
12.5 / 7 k diff oil
40 / 30 shock oil
Any saddles under 25mm or the Losi stubby.
& small esc & receiver.
Hey Ivan just joining the rango gang (the wife got it for my birthday :thumbsup:) hope to get it soon with a bit of luck
Big G
30-11-2011, 01:10 PM
I have a tekin rs to put in it hopefully should be ok.does the 12.5k go in the front diff and the7k in the rear?
I have a RS pro in mine with a R603 futaba receiver
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.