Losi LOSA6016 Extra Rigid ball cups

[jamiekerr14]

Hey guys,

Im after some of the Losi Ball cups to replace my current one's. But seem to be struggling to find somewhere in the UK that has stock. Anyone have any? cheers gents

[Darren Boyle]

Hi Jamie, we have got tons of them in at the momnet if you are still looking for some (by tons I mean about 20+ packets - we over ordered on the wrong part number LOL)

Just type the part number on our website (www.dms-racing.com (http://www.dms-racing.com)) to see them - A6016

Darren

[jamiekerr14]

Top stuff Darren

I did have a quick look on your site but didn't see them! Will get some order cheers buddy:thumbsup:

You got the Schumacher Circlip pliers instock too? at all.. worth asking

[The Chef]

What balls would go with these? I have a V3 durango and a RB5 I'd like to upgrade ball studs and cups. Recommendations please, also do you have losi mini T ball cups in stock as I can't find them.

Many thanks K

[jamiekerr14]

Schumacher ones buddy-I ran these losi cups and U3496+U3497 ball ends. And were alot better tbh and only had 1 pop off. Unlike the stock TD ones.

[Darren Boyle]

Jamie/Kristian, I will check on both of those extra requests when I get back in the shop in the morning and come back to you both (circlip pliers and mini-t ballends ;))

[jamiekerr14]

Thanks Darren! Will wait till I hear back from you before placing a order, would love to get these on my 210 for sunday.

[The Chef]

Cool, thank you.

[Adam F]

Never had a problem with the Kyosho ones... but the Durango ones do seem to pop off quite often and it always seems to loose the complete turnbuckle, rather than just one side coming off... (the HD versions)

[The Chef]

Never had a problem with the Kyosho ones... but the Durango ones do seem to pop off quite often and it always seems to loose the complete turnbuckle, rather than just one side coming off... (the HD versions)

I have to agree the Kyosho ones are fine and I just don't understand how the durango ones come off both ends, one would assume that the stress would be releived once one end had popped off.:confused:

[gainsy]

Never had a problem with the Kyosho ones... but the Durango ones do seem to pop off quite often and it always seems to loose the complete turnbuckle, rather than just one side coming off... (the HD versions)

Its because the durango turnbuckles fit so tightly inside the ballcup, they need black grease putting in the threaded part of the cup so there is a little play with the turnbuckle, since i did this i haven't had 1 come off but they should be designed not to need this doing to them
+1 on the kyosho ones as my mate has a vega & never had 1 pop off