View Full Version : Lipo TX pack
Northy
04-03-2008, 10:48 AM
Has anyone bought one of these?
http://cgi.ebay.co.uk/RC-transmitter-Lipo-battery-1800mah-11-1v-3s-for-FUTABA_W0QQitemZ130201530144QQihZ003QQcategoryZ844 43QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Any clues what settings should be used on a Lipo compatable ProTrak? :confused:
G
mark christopher
04-03-2008, 11:37 AM
charge at 1c so 1.8 amps, 3 cell 11.1v
Northy
04-03-2008, 11:41 AM
Cheers Mark,
How do you know it's 3 cells?
The Pro-Trak does some voodoo magic stuff when you start to charge a Lipo to work out what the pack is, but at the end of doing that it says to me "check 12V or external fuse". When I press a button to clear that it seems to charge ok :(
G
Chris Doughty
04-03-2008, 11:47 AM
it says 3S - this means 3 LiPo cells in series (LiPo cell = 3.7v nominal)
mark christopher
04-03-2008, 11:54 AM
one cell is 3.7 two is 7.4 three is 11.1v
make sure that the prtrak will do 3 cells
Northy
04-03-2008, 12:00 PM
Nice one Chris - Lipo new-by alert! :woot::woot::woot:
G
Northy
04-03-2008, 07:53 PM
Mark,
The Pro-Trak will only charge 2S :thumbdown:
Is this charger any good just for a TX pack?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=110229986984&ssPageName=STRK:MEWA:IT&ih=001
G
Danny McGee
04-03-2008, 09:05 PM
Get the lrp one that i use. 3300mah, 11.1V its ace. I've charged it once since stotfold national last year. Perfect for 8th racing or for those of you who are lazy :) like me
mark christopher
04-03-2008, 10:57 PM
looks like it could be, you need to make sure the plug on the pack matches the charger
this is a good un and it comes from your sponsors http://www.teamorion-avionics.com/Advantage+Chargers/Li-Po+Charging+System
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.