View Full Version : 410 Rims
av4625
13-12-2011, 11:21 PM
What rims fit the older 410r as durango r out of stock
discothesnake
13-12-2011, 11:31 PM
Associated wheels fit but you need to cut down the rear pin slightly and i think the offset might be skightly different too.
Hope this helps
Dave
acorn28
14-12-2011, 06:35 AM
I'm sure I read that the older Durango wheels have been discontinued, so might be worth converting to 14mm hex as per the v3. Think I'll be doing that once my last few sets are gone.
Adam Skelding
14-12-2011, 10:37 AM
The older wheels were infact discontinued as the mould was changed to make the new wheel.
To convert to the new hexes the parts you will need are:
Cheap way:
330312 x 2
310135 x 2
Bling Way:
310226 x 2
310135 x 2
Hope this helps
discothesnake
14-12-2011, 11:05 AM
Tell me your joking about the wheels Adam? So everyone is pretty much being forced to use the new style wheels?
That would be okay if they were available. Nobody has the fronts in stock!!
Durango need to get their house in order a bit and make sure they have stuff availabe before discontinuing other parts.
Wee bit miffed.
Dave
Adam Skelding
14-12-2011, 11:10 AM
I'm not joking about the wheels Dave.
Please check your facts before posting nobody has the wheels in stock.
http://www.team-durango.com/search.php?searchTerms=wheel&p=2&pp=15
http://www.rccarshop.co.uk/index.php/catalogsearch/result/?q=Team+Durango+Wheel
Seem to be plenty in stock
nmpsilva
14-12-2011, 12:34 PM
Or just use the Ansmann aluminnium hex mounts of the X2 (its a straight fit) and you can use any 12mm hex wheel.
http://www.tcmodels.net/components/com_virtuemart/shop_image/product/resized/TU0225_Hex_Mount_4b4c7e06a75ef_120x120.jpg
Cheers
discothesnake
14-12-2011, 02:15 PM
I'm not joking about the wheels Dave.
Please check your facts before posting nobody has the wheels in stock.
http://www.team-durango.com/search.php?searchTerms=wheel&p=2&pp=15
http://www.rccarshop.co.uk/index.php/catalogsearch/result/?q=Team+Durango+Wheel
Seem to be plenty in stock
Fair enough Adam, I should have checked but only 4 days ago you were telling people that the old rims were a viable option as the new ones were not available. Not trying to be awkward but i think TD are a bit premature in discontinuing the old style wheels.
Regards
Dave
hottuna
24-01-2012, 11:38 AM
Proline will soon come with rims for 210/410 :thumbsup:
ghostdogg
24-01-2012, 02:52 PM
I'm pretty sure RC Lazy have the old style in stock could be wrong though!!
http://rclazy.com/shop/wheels/
av4625
24-01-2012, 03:04 PM
i am using the plastic 14mm hex and will get the metals as they come in thanks adam
jayropes
24-01-2012, 06:16 PM
Beware the new rims. ive just had some delivered in white, front and rear are two comletely different shades!!!! best go for the yellow!!!!
TonyM
24-01-2012, 07:38 PM
Beware the new rims. ive just had some delivered in white, front and rear are two comletely different shades!!!! best go for the yellow!!!!
I have three sets of new rim rears, all quite different shades. Perhaps we should stipulate a batch number when we order :)
Gregors
24-01-2012, 07:45 PM
I got some old style sheels in white and they were also 2 shades
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.