PDA

View Full Version : Cougar SV front Camber Link


DCM
27-12-2011, 11:51 AM
What parts will I need to make a straight link and lose that silly angled ball cup?

john333
27-12-2011, 12:12 PM
Just get long threaded balls and some spacer washers, to move the ball further forward, job done :thumbsup:

fastinfastout
27-12-2011, 12:26 PM
I heard 2mm of washers will do, but have not done it myself yet.

DCM
27-12-2011, 12:51 PM
What about a longer turnbuckle to?

bigred5765
27-12-2011, 03:13 PM
you.ll need
2 x u1574 60mm tunrbuckles
1 x u3498 pack of 4 xtra long ball studs
and
1 x U2858 pack of 3mm spacer
we use the mi4 ball studs and 3mm of spacing on both sides

DCM
27-12-2011, 05:37 PM
Nice one Carl, seen to many of the funky ball cups break.

merlin_341
28-12-2011, 07:27 AM
well i have tried this and it works just fine however now it seems to be the Yoke that takes the hit when you crash.

mattst
28-12-2011, 11:15 AM
Any Pic's ?

Does this mod make the car handle better ? or is this mod done for reilbility?

DCM
28-12-2011, 12:25 PM
It won't make it handle better, I am going to do it for reliability reasons only.

bigred5765
28-12-2011, 02:57 PM
i think it does help a little on the handling side.

_sleigh_
28-12-2011, 04:04 PM
:confused:

DCM
28-12-2011, 05:25 PM
Maybe less flex in the ball cup, but that would be about it, as the link length would still be the same.

Timee80
28-12-2011, 06:13 PM
the 2 ball studs will still be in the same postions. It doesnt matter if the link is shaped like a coat hanger, it will still handle exactly the same

bigred5765
28-12-2011, 06:47 PM
i think its more the flex in the long angled ball cup