View Full Version : Dex410v3 RR suspension hanger
Scotty15
27-12-2011, 06:27 PM
Hi all
Just a quick question about the RR suspension hanger td330307 http://www.team-durango.com/part-info.php?partNo=TD330307 I am looking at getting one to fit on my Dex410r(2010). Looking at it I cannot see why it wont fit as all the parts around it are the same. But I just wanted to check with any of you other rango drivers who might have done the same mod.
Andy
Big G
27-12-2011, 06:38 PM
although I haven't done this myself. I am 99.9% sure it will fit no problem.
Scotty15
27-12-2011, 06:41 PM
Hi Big G
That is my thought but just wanted to put the question to a wider audience.
Andy
jimmy
27-12-2011, 06:52 PM
Hmmmm, it looks like it's a mistake that it's not listed as an option for these cars. Team drivers were using them during the year on older cars.
Dazzler
27-12-2011, 07:00 PM
I've fitted it straight on my 2010 full fat kit, but two things, first, you need to order the plastic inserts as well as the alloy brace.. and secondly, if the 410r doesn't have the spheres at the end of the hinge pins, you'll need those too.
Scotty15
27-12-2011, 07:05 PM
I noticed it was not listed for the older 410's but just thought that was to stop us just adding the new trick bits and not buying the new v3 kit. But I am sick of waiting for the kits to arrive it just seems easier to get the bits and keep my older 410 as it is a good buggy. I have rebuilt the rear end after a bad jump killed the rear supports etc so I have spare spheres and shims. I have found the hanger and the shop also supply's the inserts with it.
Andy
Dazzler
27-12-2011, 07:13 PM
That'll get you sorted then, there's no compatability issues or trickery going on.. :thumbsup:
Scotty15
27-12-2011, 07:15 PM
Kool thanks for the heads up dazzler
paulc
27-12-2011, 08:43 PM
Might be wrong but are the balls that go onto the end of the hinge pins differant when using the plastic hinge pin brace on the R version compared to the ally hinge pin brace ?
mark christopher
27-12-2011, 08:45 PM
Might be wrong but are the balls that go onto the end of the hinge pins differant when using the plastic hinge pin brace on the R version compared to the ally hinge pin brace ?
dont think the R has balls :woot: on the hinge pins
Dazzler
27-12-2011, 09:46 PM
dont think the R has balls :woot: on the hinge pins
Yes, that is the difference.
Many r owners will have brought a pack when upgrading the to an alloy hanger following a breakage of the standard plastic, so they'll most probably have some spare to use, as seems to be the case for scotty.
Scotty15
28-12-2011, 12:16 AM
Due to having a DESC 410r and a dex410r they both share many bits so I have many spares of items like the suspension hanger balls etc. And as I have changed the DESC to an alloy hanger after breaking the plastic one I had to get a pack of the balls and some shims.
But the Dex410r has had two new rear frames one due to the last owner selling it with it broken and the other due to getting a jump wrong and it landing on it's back and with it only having the plastic inserts it broke the inserts and the the frame. So I have upgraded to the metal inserts to strengthen the rear frame but I was just looking at upgrading the suspension hanger to an alloy one, I just thought it might be better in the long run to change it to the V3 item so I can change the settings without keep buying the different hangers.
hotrodchris
28-12-2011, 12:56 PM
Would seem the sensible and most cost effective way to go!
Scotty15
28-12-2011, 01:26 PM
It seems the best thing to do so I have ordered the hanger so I should have it fitted tomorrow or friday so we will see if it all goes to plan
hotrodchris
28-12-2011, 01:47 PM
best of luck but shouldn't be a problem
Stalypig
29-12-2011, 06:42 PM
What's the part number for the spheres for the hinge pins?
Dazzler
29-12-2011, 06:58 PM
TD330037
Scotty15
29-12-2011, 07:26 PM
Here is a shop that has got the Spheres
http://www.rccarshop.co.uk/index.php/spares/team-durango/dex410/suspension-arm-pivot-ball-8pcs.html
Stalypig
29-12-2011, 07:33 PM
Many thanks for the quick response.
MrMagoo
29-12-2011, 10:01 PM
Excellent, been looking for a shop with the hangers in, and they apparently have them! Order placed...
Scotty15
29-12-2011, 10:11 PM
Yep they have them in got mine delivered today so I will be fitting it tomorrow.
OneKiwi
31-12-2011, 08:14 AM
If I getthe rear one and its inserts what one is at the front? 0°?
I have -2 and +2 now
Dazzler
31-12-2011, 01:46 PM
The -2 / +2 RF Brace remains on the V3 in conjunction with the RR inserted brace.
OneKiwi
31-12-2011, 03:03 PM
OK and that goes on the front part of the rear?
I then don't need to buy the 4 for the rear then if I get the V3 with inserts right?
Ive been looking at a few setups lately and a few seem to have the 4 in the rear, I don't have that yet, so Im wondering if this will solve the problem with that and give me even more tuning options
Dazzler
31-12-2011, 03:41 PM
From what I can gather, you have the -2 / +2 Rear Front. (RF) Brace, which you would use in conjunction with the insert type Rear Rear (RR) Brace.
The RR brace will be used instead of the 0, 2 & 4 degree RR braces as included in the original 410 full fat kits.
Are the inserts the same as the old braces? 0mm 2mm and 4mm offset, or are they 1mm 2mm 3mm?
What are the available anti squat settings with the new brace?
Scotty15
09-01-2012, 02:39 PM
There only three inserts in the kit marked 1 2 3 so there are only three adjustments poss
Big G
09-01-2012, 06:49 PM
I think you turn them upside down also to give 5 different settings. or 6 if you want to be technical ;)
Scotty15
10-01-2012, 12:29 AM
Yep your correct Big G I forgot to say about turning them around. But looking at the hanger it could be turned upside down as it is machined flat on both sides so it can be used both ways.
I haven't tried it so I don't know if it will work upside down.
Are the inserts the same as the old braces? 0mm 2mm and 4mm offset, or are they 1mm 2mm 3mm?
What are the available anti squat settings with the new brace?
Doesn't anybody know?
Adam Skelding
17-01-2012, 12:01 PM
They are 1,2 and 3 degree when using -2 rear bracket.
We are doing a Team Tech Tip, showing all the possible combinations of the anti squat blocks and inserts.
jimmy
17-01-2012, 12:05 PM
There are 11 different anti-squat settings using the inserts - thats taking in both high and low roll centres (+2 / -2) - and doesn't include the one settting that gives you 0.5 degrees of pro-squat (12 settings possible all together).
Big G
17-01-2012, 12:22 PM
I thought I was wrong after I posted that hehe :D
They are 1,2 and 3 degree when using -2 rear bracket.
We are doing a Team Tech Tip, showing all the possible combinations of the anti squat blocks and inserts.
Cheers Adam
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.