PDA

View Full Version : Sx2 outdrives?


DaveP
04-01-2012, 11:21 PM
Hey guys,

I was looking for some replacement outdrives on the Schumacher website, part U3336 and U3337.. They are no longer listed :(

Anyone know if the sx3 parts would work?

Seems strange that the SX2 parts aren't available anymore? Its not that old!

Cheers,

Dave

bigred5765
04-01-2012, 11:39 PM
not sure if just the diff outputs will fit a sx2 diff center,but a full diff will, weve run a old sx diff in are sx3,

Cardnim
05-01-2012, 09:22 AM
They are interchangeable so SX, SX2 or SX3 outdrives will all swap with each other. :)

DaveP
05-01-2012, 10:10 AM
Excellent... thanks guys

Cruise
05-01-2012, 10:26 AM
They are interchangeable so SX, SX2 or SX3 outdrives will all swap with each other. :)

No they won`t SX3 outdrives require all the other SX3 diff parts:
Washers bearings and pulley.

Cruise

DaveP
05-01-2012, 11:09 AM
So my only option is to buy a complete assembled SX3 diff?

bigred5765
05-01-2012, 01:45 PM
or ring schumacher up and talk to them direct

MattW
05-01-2012, 07:12 PM
I'm sure you'll find some around - if no where else then i'd be surprised if there wasn't any on ebay. I know I have some of the original lighter SX ones, but not sure if I have any later ones.

feniks
05-01-2012, 10:02 PM
mmmmm think they will fit if you give me till tomorrow evening I will give it a go and tell you wat you wil or will not need to get it to work. my only gues would be bearings and schims bud will defo now tomorrow and post it down here .

skinyboy
05-01-2012, 11:36 PM
i am new to schumacher myself but would the cougar outdrives fit?

MattW
06-01-2012, 12:43 PM
i am new to schumacher myself but would the cougar outdrives fit?

No, the whole diff (and importantly plates) are smaller.

feniks
07-01-2012, 06:38 PM
ok so wat do I now lol. it cant be done . verry simple as the diff puly itself issent the problem bud the side plates on the pully are . now it works the same as the normall pullys so you click them on on the outside . the old pullys they are clickt on on the inside of the dif so they will hit the outdrives and for all the rest biside that it would work no problem . bud as outdrives and the pully are the main cost of the diff i would say sorry bud get a compleet new sx3 diff . hope this helps .

Cardnim
07-01-2012, 07:52 PM
My apologies for the wrong info.
I dont know what happened but I was able to swap my old diffs from the SX2 into my SX3 when I bought it. Seemed to fit no problems.

RudolfXC
07-01-2012, 07:57 PM
Get them from:

http://www.ebay.co.uk/itm/SCHUMACHER-U3337-CAT-SX-Male-Diff-Output-/270613303655?pt=UK_ToysGames_RadioControlled_JN&hash=item3f01cf5167

and

http://www.ebay.co.uk/itm/SCHUMACHER-U3336-CAT-SX-Female-Diff-Output-/270613302292

both from the same seller.

Cardnim
07-01-2012, 08:11 PM
Rudolf - they look like the SX/SX2 ones which the guys are saying dont fit (and I believe them!!) so be careful buying those ones. I dont think they'll work in the SX3?

Male SX3 outdrives:
http://www.racing-cars.com/pp/New_Cars_and_Parts/CAT_SX3/U3852.html

bigred5765
07-01-2012, 08:13 PM
nah you got it the wrong way round mate, they are the ones he wants he has a sx2

Cardnim
07-01-2012, 08:30 PM
Ahhhhhhhhhh! I wondered at why I had got mine to work in the car but everyone was saying no!!
Thought I was going mad.

Frig me though, Im having a mare, so Im just going to bow out of this one and concede that I know jack all and should probably just shuttup :thumbsup:

Cruise
07-01-2012, 08:33 PM
My apologies for the wrong info.
I dont know what happened but I was able to swap my old diffs from the SX2 into my SX3 when I bought it. Seemed to fit no problems.

The whole diff fits without problem but the parts won`t interchange

Cruise

DaveP
10-01-2012, 05:32 PM
Thanks guys, I phoned Schumacher and they said the complete diff is the only option (except for ebay that is)

I guess the SX3 diff isn't a bad way to go (even if I can get the parts from ebay or 2nd hand) - at least those parts should be available for longer...