PDA

View Full Version : What other diffs fit the 210? Need emergency replacement


Autocratic
09-01-2012, 03:07 AM
Hi. Long time reader.

My first diff rebuild on this buggy and I forget the spring. Long story short, my diff will not come part and now feels like rocks.

I need a list of other manufacturer differentials that fit the 210. Preferably from AE or Losi (what I have available from local shops).

No US online stores have 210 diff rebuild kits in stock, and until TD gets their ass moving and starts shipping more parts I'm stuck right now with trying to piece something together.

Any help will be greatly appreciated. Thanks.
-Auto

OneKiwi
09-01-2012, 07:50 AM
Think you only hope is the sc10 gear diff or arrma gear diff

slowjun
09-01-2012, 08:58 AM
SC10 gear Diff, you need to add spacers , did to mine and made a plastic spacer, now its super smooth.

coppeid this on another thread on here, a few threads below....
the link for another Manufacturer is ARRMA (http://www.rctech.net/forum/electric-off-road/360684-official-durango-dex210-thread-191.html)

AR10003
http://www3.towerhobbies.com/cgi-bin/wti0001p?&P=SM&I=LXBKXG

AR10009

http://www3.towerhobbies.com/cgi-bin/wti0001p?&P=SM&I=LXBKXH

AR10008

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXBKZH&P=M

Tower has it , check it out.


http://i778.photobucket.com/albums/yy64/slow_jun/DEX%20210/DSCN2514.jpg

http://i778.photobucket.com/albums/yy64/slow_jun/DEX%20210/DSCN2513.jpg


http://i778.photobucket.com/albums/yy64/slow_jun/DEX%20210/GEDC0041-1.jpg

Autocratic
10-01-2012, 09:37 AM
Well I picked up the SC10 diff. Also, found these shims from HPI:

http://www.amainhobbies.com/product_info.php/cPath/1_25_1459_260/products_id/31282/n/HPI-10x12x02mm-Washer-10

They match PERFECT to the stock diff shims. You need two sets to have enough spacing.

I'm starting with 3k oil. It's very smooth.

OneKiwi
10-01-2012, 10:09 AM
with the arrma one can you do rm/mm 4?

slowjun
11-01-2012, 08:15 AM
with the arrma one can you do rm/mm 4?
same number of tooth, and drop right in., its all metal so there is a bit of a rotating mass onto it.

mark christopher
11-01-2012, 09:47 AM
arrma / durango = same company owners..... where can you buy them from?

ConceptRacing
11-01-2012, 09:54 AM
Tower hobbies carry full stock

OneKiwi
11-01-2012, 02:54 PM
is this going to be the official TD diff?? or is the TD one going to be different to the arrma one?

mark christopher
11-01-2012, 03:56 PM
is this going to be the official TD diff?? or is the TD one going to be different to the arrma one?

my guess only

sly
11-01-2012, 04:24 PM
Arrma fits like a glove, it tested yet. parts numbers are what's above
http://i266.photobucket.com/albums/ii249/slymonuk/IMAG0225.jpg

jayst
11-01-2012, 04:40 PM
i cud see the diff casing on the durango diff could be in plastic ?
just my guess

Autocratic
12-01-2012, 04:03 AM
Edit: delete post.

Reo
17-01-2012, 07:24 PM
just 2 gears in diff? it can be build with 4 if you make a slot in where both pins crosses ? bad english ther maby...

mark christopher
17-01-2012, 08:36 PM
just 2 gears in diff? it can be build with 4 if you make a slot in where both pins crosses ? bad english ther maby...
it looks like you could, just use the 410 pins

jayst
17-01-2012, 08:54 PM
i ran my arrma diff on astro at cov on saturday . had 2k oil in . the car rotated really quickly and made the car twitchy . but jumping was ok a little rear end first . im goin to rebuild it with 5k oil to try next

stephenh
17-01-2012, 09:50 PM
5K really! I had 2K and yeah it was a bit direct so I went to 1000cst and it was much better. I see some of the team drivers are down to 650cst. I would have thought lighter on higher grip was better.......... others may disagree

mark christopher
17-01-2012, 10:56 PM
i cud see the diff casing on the durango diff could be in plastic ?
just my guess

Steel gear plastic case ........ :)

mark christopher
17-01-2012, 11:18 PM
i cud see the diff casing on the durango diff could be in plastic ?
just my guess

Steel gear plastic case ........ :)
Don't forget if the durango diff has 4 small gears you will use a thinner oil

OneKiwi
18-01-2012, 06:30 AM
Had a look and 650cts is only 45 wt losi oil, wow

Autocratic
18-01-2012, 11:06 PM
I've been using Mugen 10kwt oil in my SC10 diff. Been working very well. I tried 3k & 7k and I was still getting too much unloading.

Reo
20-01-2012, 06:10 PM
builded my arrma diff with 4 gears inside, feels good.

adey
20-01-2012, 06:33 PM
i heard that a b4.1 diff fits.