PDA

View Full Version : Best countersunk screws


mikeyscott
24-01-2012, 12:08 AM
After some decent 2mm countersunk screws.

Had some Swiss cheese ones recently, so recommendations?

badger5
24-01-2012, 04:48 AM
Try www.modelfixings.co.uk you need to get the high tensile steel ones as they should be grade 10.9 or 12.9 which is high tensile. Stay clear of stainless steel as they are too soft, A2 is equivalent to approx grade 4 and A4 same as 8.8.

shanks
24-01-2012, 08:01 AM
http://www.rc-screws.co.uk/ :thumbsup:

Skye
24-01-2012, 08:37 AM
I bought a load of different sizes from Kev at Inside Line. I think they are only stainless steel, but touch wood I have never had any problems with them. :thumbsup:

U1timate PigDog
24-01-2012, 08:41 AM
Xray screw are really good quality but the price really shows, I'm not sure if they still do but they used to sell them in packs available from teamxray.co.uk.

I'm sure there are plenty of other good ones out there too, but generally speaking you will get what you pay for.

good luck

PaulUpton
24-01-2012, 08:42 AM
I bought a load of different sizes from Kev at Inside Line. I think they are only stainless steel, but touch wood I have never had any problems with them. :thumbsup:

+1 never had a problem with mine :thumbsup:

johnnyp
24-01-2012, 10:28 AM
http://shop.cpdracing.co.uk/index.php?main_page=index&cPath=7_30&sort=20a&page=3
High tensile screws!!

markwilliamson2001
24-01-2012, 05:32 PM
Can recommend model fixings....all screws about 2mm will be a bit bendy though, or they just snap!

mark christopher
24-01-2012, 07:52 PM
you wanting m3 screws with a 2mm hex or m2 screws which will be smaller hex

mikeyscott
24-01-2012, 07:57 PM
M3 2mm

mark christopher
25-01-2012, 07:07 PM
M3 2mm

i went to my local bolt suppliers bapp bolts, got shit loads for £20 of all lengths

RoyBoy
26-01-2012, 02:58 PM
After some decent 2mm countersunk screws.

Had some Swiss cheese ones recently, so recommendations?
www.screwz4rc.co.uk (http://www.screwz4rc.co.uk) highly recommended.

Neil Skull
26-01-2012, 04:21 PM
You wont have a problem with Kyosho ones :)

MHeadling
26-01-2012, 04:33 PM
+ 1 on Kyosho bolts, bought a few packs of these in my time, very good quality :)

mikeyscott
26-01-2012, 04:34 PM
Many thanks people, have now ordered what I'm after along with some new hex ends

+1 for Kyosho :)