Help Regarding Justock Hobbywing ESC.

[JamieMcC]

Hi,
Im having trouble setting up my Hobbywing Justock ESC (with a novak 10.5t Motor), I have only bought it but I am having trouble Throttle calibrating it and i also have no brake on it either, so I would be very happy If someone could help me with this.

[dodgydiy]

have you checked that your throttle stick neutral is set to centre on your radio, this can stop the brakes working, also try setting your end points to 110% if its anything like the ezrun controllers this can help with some radio's. also i think there were problems in some way with the earlier core rc 2.4 radio's and the speedo's drive frequency on ezruns...just in case its a core you are using

[funkydunkyboogie]

Hi Try reversing your throttle channel as well

[gazmond]

Assuming you have the same options on your just stock that I have on my 2.0 set the reverse setting to 100% and re-calibrate. Sounds odd even if you are running forward/brake but it worked for me and appears to be a fairly common problem.

[JamieMcC]

have you checked that your throttle stick neutral is set to centre on your radio, this can stop the brakes working, also try setting your end points to 110% if its anything like the ezrun controllers this can help with some radio's. also i think there were problems in some way with the earlier core rc 2.4 radio's and the speedo's drive frequency on ezruns...just in case its a core you are using

Its says about Changing Throttle neutral range but it has no instructions on how to change, maybe you could help me??

[fidspeed]

Hi Jamie

throottle neutral range is only the dead band ariund "neutral" point "ie when the stick or trigger is at rest " it makes it a little less sensitive in case you catch the trigger or stick by accident


PM me if you need more help Jamie

Dave:confused:

[JamieMcC]

Thanks dave:thumbsup: