View Full Version : Spektrum in 3VCS transmitter
DaveG28
30-03-2008, 10:38 PM
Hi,
Has anyone used spektrum pro module in the 3VCS transmitter? I am thinking of doing so, but saw on Demon's website that it won't click in properly or something? Was wondering how people have found trying to do it!
Dave
AmiSMB
31-03-2008, 09:19 AM
I have ran a Spektrum module in my 3VCS with no problem at all. The holding lugs are a little tight but you just make sure that is pushed in all the way till they click.
I run the Spektrum Pro in the 3VC, if you run the HRS Module for the 3VCS, rumour has it you got to run digitial servo's too.
DaveG28
31-03-2008, 11:07 AM
I'm going for the micro receiver so no HRS sadly :thumbdown:
mattym0310
31-03-2008, 11:07 AM
rumour has it you got to run digitial servo's too.
yeah my brother melted my perfectly decent servo when he got his new :cry: :lol:
RogerM
31-03-2008, 11:25 AM
I run Spektrum in my 3VC with no issues. I have used the system with both analogue and digital servos with no issues either!
mattym0310
31-03-2008, 11:30 AM
I believe only it's the HRS one that only works with Digi servos
Body Paint
31-03-2008, 11:58 AM
I believe only it's the HRS one that only works with Digi servos
Correct, if you use the Spektrum HRS system it will not work properly and/or will fry your servo.
If you use Spektrum Pro you use the PPM setting and you can use some analogue servos (not all seem to be compatable)
AndyM
31-03-2008, 11:59 AM
yeh, if you run the HRS Spektrum in the 3VCS you MUST use a digital servo, because you will cook the analogue one, as I found out :thumbsup:
AndyM
31-03-2008, 12:00 PM
Craig beat me too it :(
DaveG28
31-03-2008, 12:06 PM
Hopefully not a silly question, but I can run digital servo's without Uzi g HRS can't I?
Body Paint
31-03-2008, 12:10 PM
yes you can:thumbsup:
RogerM
31-03-2008, 04:08 PM
That will be it then ..... I'm poor so am using a second hand 3VC ..... not a shiney 3VCS (which I don't think is worth the extra anyway)
Trigati
02-04-2008, 12:37 PM
I use the Spektrum in my 3VC and it doesn't quite fit properly, it's fine but it sits a little proud and it only clips on one side. It's not loose really it won't come out even after a drop, but it's loose enough that with gentle press it sinks 2mm further in, before popping back up.
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.