PDA

View Full Version : Replacement bearing sets?


The Doctor
07-03-2012, 09:11 PM
Hi guys,

Anyone recommend a decent replacement bearing set for the Cougar SV? Not fussed about ceramic, just want a decent replacement set of bearings. Cheers.

reg
07-03-2012, 10:08 PM
rc bearings.co.uk are ok,£15 for a full set for the cougar

joolstacho
08-03-2012, 10:44 AM
Anyone have any idea if any of the RCbearings sets would suit a Procat?

Cardnim
08-03-2012, 11:03 AM
rc bearings.co.uk are ok,£15 for a full set for the cougar

+1 for RCbearings.co.uk
Great new website, really good quality bearings, and Colin is a top bloke.

No idea if they do Procat, but give Colin a phone and ask him. He has always been really helpful to me in the past. :)

kaszal
23-03-2012, 07:50 PM
Hi Jools, Procat bearings are easy :D

12 pcs 8x16x5mm

http://www.rcbearings.co.uk/index.php?route=product/product&filter_name=8x16x5&product_id=34

The 2 pcs 8x12x3.5mm flanged bearings for the front diff, I think you'll have to get those elsewhere.

joolstacho
24-03-2012, 10:50 AM
Thanks Luke, I think I've seen sets of 10 of those rather cheap on the bay.
(Cheapscate me!!!)
-J

kaszal
24-03-2012, 11:34 AM
Yeah, save money :thumbsup: Will you buy a full set of 12 for your Procat?

I think stainless steel rubber sealed bearings are best for outdoors, aren't they?

For the rear hubs I'm using these from GAP Bearings on eBay...

http://www.ebay.co.uk/itm/688-2RS-QUALITY-RUBBER-SEALED-BEARING-8x16x5mm?item=350352872585&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3D LVI%26ps%3D63%26clkid%3D7225906296215416939&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3D LVI%26ps%3D63%26clkid%3D7225906296215416939#ht_130 1wt_1064

I had more cash I'd get these from BOCA...

http://www.bocabearings.com/bearing-inventory/Radial-Bearings/6813/YCWK6882YSNB2-8x16x5

It says only Abec 1 but I have some BOCA 8x12x3.5 flanged Abec 1 which have a lot less play than so-called Abec 5 from elsewhere. I guess there are other more important factors than Abec rating.

joolstacho
27-03-2012, 06:42 AM
Yes Luke, a full set of 10 from GAP I think is the go, plus the 2 front flanged ones.
(Though I've hit another slight parts hurdle, so the bearings have slipped down the priority list!)
Fun ain't it!!!
-Jools