View Full Version : Fredrik?
discothesnake
21-03-2012, 11:31 PM
Anyone know if Fredrick and his products are still on the go? Would like some shock towers but not seen him on here for a while.
Thanks
Dave
Fredrik Emilsson
12-04-2012, 06:34 PM
Iīm been away for a while, sorry about that.
Have also been working on some new things, but not had the time to finish them. Will soon be ready.
What parts do you need?
leeboy44
12-04-2012, 07:08 PM
try JT models if your in the uk? :thumbsup:
discothesnake
12-04-2012, 07:35 PM
Iīm been away for a while, sorry about that.
Have also been working on some new things, but not had the time to finish them. Will soon be ready.
What parts do you need?
Really just like a pair of your thick shock towers for the 502.
They still available ?
Regards
David
olefiloux
13-04-2012, 01:37 PM
Iīm been away for a while, sorry about that.
Have also been working on some new things, but not had the time to finish them. Will soon be ready.
What parts do you need?
I needed some 511 diffs covers front and rear and lipo tray....:wub
Nice to see you here again Fredrik.
Fredrik Emilsson
14-04-2012, 12:52 PM
I have 4mm rear shock towers in stock, 4mm front on their way.
Front and rear 3.5 shock towers in stock.
@olefiloux: Many thanks!:) Even though Iīve officially donīt make them any more, I will see what I can do.
Dalton
14-04-2012, 01:42 PM
Any plan to make 511 gear box covers that allow geared diffs to be fitted ?
Fredrik Emilsson
14-04-2012, 06:07 PM
Already have. :)
discothesnake
14-04-2012, 06:29 PM
Great, if you could let me know when they are available i will take a pair.
Regards
David
Dalton
14-04-2012, 10:18 PM
same :)
crazyken76
15-04-2012, 05:19 PM
will the new diff covers work with the standard diffs ?
olefiloux
15-04-2012, 05:32 PM
I have 4mm rear shock towers in stock, 4mm front on their way.
Front and rear 3.5 shock towers in stock.
@olefiloux: Many thanks!:) Even though Iīve officially donīt make them any more, I will see what I can do.
Thanks Fredrik.
I would like to tell you that i 'm only running gear diffs. As I guessed that there's new diff cover for this....
Fredrik Emilsson
17-04-2012, 06:16 PM
Redesigned diff covers works with both ball and gear diff.
Will also soon have 502X 4mm shock towers in stock.
Rear tower with wing mount holes 5 mm higher than stock tower.
Dalton
17-04-2012, 06:25 PM
Redesigned diff covers works with both ball and gear diff.
Save a pair for me :) ive opted to run ball diffs rather than remove your original covers until they are available
knighthawk
17-04-2012, 06:48 PM
I'm looking for a set of front a rear covers for the 511 that take both ball n gear diffs
Can you post when they are available ?
Cheers
crazyken76
17-04-2012, 10:25 PM
put me down for a set of the new diff covers please
qatmix
18-04-2012, 01:18 PM
Unless I have done something spectacularly wrong, the gear diff works fine with my 501x diff cover.
Fredrik Emilsson
18-04-2012, 06:22 PM
Yes, the 501X has less material on the right side.
New 511 diff covers have thinner walls and some other minor adjustments.
Think those who have "old" version can modify them to fit gear diff.
trowta
19-04-2012, 03:41 PM
hi Fredrik I would like to order the front and rear gear diff covers for the 511 also
thanks
Tod
trowta
21-04-2012, 04:58 AM
Yes, the 501X has less material on the right side.
New 511 diff covers have thinner walls and some other minor adjustments.
Think those who have "old" version can modify them to fit gear diff.
hey Fredrik are you looking at making some more covers, as I have a brand new 511 with the gear diffs and ball diffs and don't really want to use it unless I can get the covers
Fredrik Emilsson
21-04-2012, 07:25 AM
Yes, will make more of them. :)
Iīve had quite a few request both here and via e-mail.
New updated versions fit 511 with gear and ball diffs.
Sorry for not being so active at Oople atm.
Iīve been traveling and also working with new parts.
trowta
21-04-2012, 10:38 AM
that is awesome news what email can I get you on or just PM you?
trowta
28-04-2012, 02:17 PM
Yes, will make more of them. :)
Iīve had quite a few request both here and via e-mail.
New updated versions fit 511 with gear and ball diffs.
Sorry for not being so active at Oople atm.
Iīve been traveling and also working with new parts.
any idea when you will have the covers available
?
Fredrik Emilsson
08-05-2012, 09:57 PM
Again, sorry for not being so active here...
Should have them ready next week.
trowta
08-05-2012, 11:46 PM
that great news mate, look forward to hearing from you..:)
David Church
09-05-2012, 06:57 AM
Hi Fredrik,
Can you please add my name to the list of people that want diff covers for the 511, I will have a few of them off you for my team drivers, and of course for myself.
Cheers
Dc
Fredrik Emilsson
09-05-2012, 07:11 AM
Sure David, will do.:)
Will also post here when I have them in stock.
discothesnake
05-06-2012, 08:31 AM
Hi Fredrick, just wondering if you have finished the shock towers yet? Looking for a set now.
David
Fredrik Emilsson
18-06-2012, 08:40 AM
Sorry David, didīnt notice that you had posted a question.
I have ordered parts from Fibre-Lyte, for both 511 and 502X.
Iīve decided to offer parts on both "normal" 3.5 carbon and the 4mm parts in carbon 660.
Carbon 660 has alternating layers of carbon fibre and fibreglass. It looks the same on the surface as the standard plain weave mounts, in theory it is a little tougher due to the fibreglass.
I will stock the following parts:
TRF502X Rear shock tower high wing mount (5 mm up) in 4 mm carbon 660: 18 euros
TRF502X Rear shock tower high wing mount (5 mm up) in 3.5 mm carbon: 18 euros
TRF502X Rear shock tower in 4 mm carbon 660: 18 euros
TRF502X Rear shock tower in 3.5 carbon (already in stock): 18 euros
TRF502X Front shock tower in 4 mm carbon 660: 15 euros
TRF502X Front shock tower in 3.5 mm carbon (already in stock): 15 euros
TRF511 Front shock tower in 4 mm carbon 660: 15 euros
TRF511 Front shock tower in 3.5 mm carbon: 15 euros
TRF511 Rear shock tower in 4 mm carbon 660: 18 euros
TRF511 Rear shock tower in 3.5 mm carbon: 18 euros
TRF511 LiPo_carbon tray with carbon middle piece and stainless steel center weights: 25 euros
(2 stainless steel weights (17 and 26 grams) are included. So you can add 17, 26 or 43 grams.)
Again, my apologies for not replying faster. Itīs been a bit too much to do.
trowta
30-06-2012, 02:13 PM
Sorry David, didīnt notice that you had posted a question.
I have ordered parts from Fibre-Lyte, for both 511 and 502X.
Iīve decided to offer parts on both "normal" 3.5 carbon and the 4mm parts in carbon 660.
Carbon 660 has alternating layers of carbon fibre and fibreglass. It looks the same on the surface as the standard plain weave mounts, in theory it is a little tougher due to the fibreglass.
I will stock the following parts:
TRF502X Rear shock tower high wing mount (5 mm up) in 4 mm carbon 660
TRF502X Rear shock tower high wing mount (5 mm up) in 3.5 mm carbon
TRF502X Rear shock tower in 4 mm carbon 660
TRF502X Rear shock tower in 3.5 carbon (already in stock)
TRF502X Front shock tower in 4 mm carbon 660
TRF502X Front shock tower in 3.5 mm carbon (already in stock)
TRF511 Front shock tower in 4 mm carbon 660
TRF511 Front shock tower in 3.5 mm carbon
TRF511 Rear shock tower in 4 mm carbon 660
TRF511 Rear shock tower in 3.5 mm carbon
TRF511 LiPo_carbon tray with carbon middle piece and stainless steel center weights.
Again, my apologies for not replying faster. Itīs been a bit too much to do.
any idea when the diff covers will be ready for the trf 511?
Fredrik Emilsson
01-07-2012, 10:25 PM
My apologies, have been bit too busy with my daytime work. As Iīve probably mentioned before, Iīve been traveling a lot.
Didīnt expect it to be so much to do...
But now I will go on vacation, so I will have more time for these things.
So I will check if I can have the parts made this week. Yes, thought I would have had them ready long time ago, but...
Parts mentioned above are being made by Fibre-Lyte.
Iīve updated the previous post with prices.
trowta
03-07-2012, 01:34 PM
My apologies, have been bit too busy with my daytime work. As Iīve probably mentioned before, Iīve been traveling a lot.
Didīnt expect it to be so much to do...
But now I will go on vacation, so I will have more time for these things.
So I will check if I can have the parts made this week. Yes, thought I would have had them ready long time ago, but...
Parts mentioned above are being made by Fibre-Lyte.
Iīve updated the previous post with prices.
No Problems at all Fredrik you are doing all of us a favour, just let me know when they are ready and I will send you the cash
Tod
Fredrik Emilsson
26-07-2012, 08:12 PM
All these parts are now in stock:
TRF502X Rear shock tower high wing mount (5 mm up) in 4 mm carbon 660: 18 euros
TRF502X Rear shock tower high wing mount (5 mm up) in 3.5 mm carbon: 18 euros
TRF502X Rear shock tower in 4 mm carbon 660: 18 euros
TRF502X Rear shock tower in 3.5 carbon (already in stock): 18 euros
TRF502X Front shock tower in 4 mm carbon 660: 15 euros
TRF502X Front shock tower in 3.5 mm carbon (already in stock): 15 euros
TRF511 Front shock tower in 4 mm carbon 660: 15 euros
(NOTE! New design with 3 holes. Original outer hole removed)
TRF511 Front shock tower in 3.5 mm carbon: 15 euros
(NOTE! New design with 3 holes. Original outer hole removed)
TRF511 Rear shock tower in 4 mm carbon 660: 18 euros
(NOTE! New design. Original outer hole removed. Additional inner holes)
TRF511 Rear shock tower in 3.5 mm carbon: 18 euros
(NOTE! New design. Original outer hole removed. Additional inner holes)
TRF511 LiPo_carbon tray with carbon middle piece and stainless steel center weights: 25 euros
(2 stainless steel weights (17 and 26 grams) are included. So you can add 17, 26 or 43 grams.)
Some additional info about TRF511 shock towers:
The changes that Iīve done makes towers stronger than original parts.
More material around shock mounting holes and tower mounting holes (on the outside).
Removed the outer shock mounting holes on both front and rear tower.
On rear tower Iīve added additional inner holes (Shown in green below).
The unused lower holes at rear tower are removed.
Made the openings smaller.
Sketch below show some of the most important modifications that Iīve done.
Red parts are removed (original design). Green are new.
Now shown are previous thickness around mounting holes.
http://www.tamiyaclub.com/getuserimage.asp?t=g&id=img13377_19072011230510_1_350.jpg
http://www.tamiyaclub.com/getuserimage.asp?t=g&id=img13377_19072011230510_2_350.jpg
Proto parts:
http://www.tamiyaclub.com/getuserimage.asp?t=g&id=img13377_19072011230510_3_350.jpg
http://www.tamiyaclub.com/getuserimage.asp?t=g&id=img13377_19072011230510_4_350.jpg
trowta
07-08-2012, 01:15 PM
any idea when the diff covers will be ready for the trf 511?
jackeltrader
08-08-2012, 12:47 PM
[QUOTE=trowta;682144]any idea when the diff covers will be ready for the trf 511?[/QUO
I second that, I've been waiting to hear back from Fredrick for ages...any news would be great!?! :thumbsup:
Fredrik Emilsson
09-08-2012, 10:38 AM
I know, it feels like years ago. Sorry guys...:(
I received a few today, will get more beginning of next week.
New ones has been improved in several ways.
Fits both gear and ball diff (old news...)
Sits even better/more secure.
Easier to install diffs, less stress on belts.
They can be used with both 3.5 and 4mm shock towers without any modification.
Some pics:
http://www.cadelit.se/bild/TRF511_new_covers.jpg
Rear diff cover.
http://www.cadelit.se/bild/TRF511_new_covers_low_stress.jpg
Those who want can now order them and I will ship next week.
Cost 25 euros each.
Short front and short rear diff ones.
trowta
12-08-2012, 05:16 AM
YES PLEASE!!!!
Fredrik Emilsson
24-08-2012, 01:11 PM
All parts in stock, incl diff covers.
HeavyD99
03-09-2012, 02:59 AM
Hey Fredrik - have you considered making a taller rear shock tower, similar to the Atomic Carbon tower for the DB01? The AC tower has two sets of shock mounting holes, stock and 'taller' so that you don't have to cut spring coils to gain the proper ride height.
Looking forward to purchasing a set of front & rear diff covers for my 511 - nice work!
olefiloux
24-09-2012, 12:35 PM
I'm looking for a 511 lipo tray.
Is there a real difference between the Tamiya and the Alaste one?
thanks.
rcaddict
24-09-2012, 02:32 PM
Well, for starters, the Tamiya Lipo tray is a discontinued part.
olefiloux
24-09-2012, 03:43 PM
Well, for starters, the Tamiya Lipo tray is a discontinued part.
sure, but I already got one:lol:.
Is it interesting to have the alaste instead of the Tamiya?
Fredrik Emilsson
24-09-2012, 05:53 PM
My lipo tray moves the batteries 4mm to clear center bulkhead. Also available with stainless weights.
Aussie Top Force
25-09-2012, 10:47 AM
Hi Fredrik and fellow Oopler's,
I have just fitted a 502X Lipo Tray V2 and shock tower spacers to my 502X from alaste.com (Fredrik). The quality is 2nd to none! Excellent work and communication.
Thank you.
HeavyD99
25-09-2012, 04:48 PM
From my first email, to confirmation of stock to payment and hopefully shipping - 48 hours!
Looking forward to my diff covers and lipo plate for my 511!
Thanks Fredrik!
taomo
16-10-2012, 05:34 AM
When will be in stock the TRF502x Carbon front shock tower 4mm frederik?
thks :-)
Fredrik Emilsson
16-10-2012, 10:14 AM
I have in stock now.:)
rcaddict
16-10-2012, 10:25 PM
From my first email, to confirmation of stock to payment and hopefully shipping - 48 hours!
Looking forward to my diff covers and lipo plate for my 511!
Thanks Fredrik!
Yeah! Fred is Awesome!! :thumbsup:
clint
17-10-2012, 06:39 PM
Hi Fredrik, I have a 502X on the way and am interested in a lipo tray, shock tower spacers and battery straps.
Question is what would my total be shipped to Ottawa Canada, same place as Daragh a few posts back..:)
Also can I give you paypal??
Thanks..Clint Ford
Fredrik Emilsson
17-10-2012, 08:23 PM
Hi Clint!
TRF502X LiPo carbon tray with carbon middle piece and 3 stainless steel center weights: 23 euros
TRF502X Battery straps (2 pieces): 16 euros
TRF502X Rear shock tower high wing mount (5 mm up) in 4 mm carbon 660: 18 euros
TRF502X Rear shock tower high wing mount (5 mm up) in 3.5 mm carbon: 18 euros
TRF502X Rear shock tower in 4 mm carbon 660: 18 euros
TRF502X Rear shock tower in 3.5 carbon: 18 euros
TRF502X Front shock tower in 4 mm carbon 660: 15 euros
TRF502X Front shock tower in 3.5 mm carbon: 15 euros
TRF502X Front Shock tower spacer (2mm): 5 euros
TRF502X Rear Shock tower spacer (2mm): 5 euros
Ski-doo shipping ;) cost ~4 to 7 euros.
You can send payment via paypal.
taomo
22-10-2012, 01:56 PM
The TRF502X Front shock tower in 4 mm carbon 660 arrived today, very fast and excellent quality!!!!
Thanks Fredrik!! ^_^
HeavyD99
04-01-2013, 12:55 AM
Hi Fredrik,
Any chance you plan to make updated diff covers for those who have purchased the new 511 upgrade kits - your current diff covers are "backwards" now that the belts have been swapped left to right?!
I suppose I could always do my own cut n fix, swap, with some extra lexan and CA glue!
Fredrik Emilsson
07-01-2013, 08:17 AM
Yes Sir, already made them.:)
Just not had the time to test them yet. Will do this week.:)
xfactor
07-01-2013, 06:07 PM
EXCELLENT FREDDIE MY BOY MAN !!!!!! :D:D:D PUT me down for front and rear please.:D:D:D
Airwave
09-01-2013, 01:16 AM
Hi,
I have a question for you... I have some of your parts on my TRF502X and something is still bothering me.
You probably know about the front tower geometry problem. The fact is that the shocks are not working perpendicular to the arms. Would it be possible to produce new shock tower spacers, but angled? so we can order two items and mount them in front and behind of the tower... Do you see what I mean? :confused:
On the left, how it is mount now, and on the right how it could be:
http://t.imgbox.com/acijR5vH.jpg (http://imgbox.com/acijR5vH)
The angle could not be enough but it would be better than nothing... Is that a bad idea?
What do you think? :eh?:
Fredrik Emilsson
09-01-2013, 10:43 AM
I see what you mean. :)
But I donīt think it will make any difference really.
As long as there are no binding the shocks I think it is ok.
The shocks should always work perpendicular to the suspension arms, thatīs whatīs important. If not, you need to move the damper tower forward by using spacers behind shock tower or on damper mount.
The spacers I made move the tower forward to avoid binding of the shock. It allows the shock cap to "pivot" around the ball, which it canīt really do in itīs original position.
If you look at the rear tower it is not perpendicular to the suspension arms either due to the anti-squat (angle of suspension arms). So theoretically we have the same problem there.
But I might be wrong.:)
djmcnz
09-01-2013, 11:48 AM
Yes Sir, already made them.:)
Just not had the time to test them yet. Will do this week.:)
Top shelf, count me in.
Coincidentally, I cracked (actually just looks like a stress fracture) my rear upper diff cover from you in late December - I was pretty bummed until I realised I need a new one anyway for the upgrade kit!
I look forward to the testing outcomes.
Rich D
09-01-2013, 12:20 PM
Ill take a rear cover of the new type too please Fredrik
Fredrik Emilsson
09-01-2013, 12:38 PM
Of course guys, will make some for you.:)
Fredrik Emilsson
17-01-2013, 04:06 PM
Update
I will hopefully be able to test parts this week.
Was supposed to test last week, but the parts I had ordered was suddenly backordered...
So I ordered from Stella (Excellent service btw.)
Fredrik Emilsson
03-02-2013, 06:58 PM
Should have diff covers ready this week.
Fredrik Emilsson
03-02-2013, 07:08 PM
Sorry, doubleclicked...
Rich D
03-02-2013, 10:50 PM
Great cheers for the update Fredrik
Fredrik Emilsson
05-02-2013, 07:21 PM
Short video showing how easy you can flip the middle piece of the updated diff cover for use with standard or upgraded 511.
So diff covers can be used with ball or gear diff, standard or upgrade kit.
www.cadelit.se/cover.mp4 (http://www.cadelit.se/cover.mp4)
djmcnz
06-02-2013, 11:26 AM
Short video showing how easy you can flip the middle piece of the updated diff cover for use with standard or upgraded 511.
So diff covers can be used with ball or gear diff, standard or upgrade kit.
www.cadelit.se/cover.mp4 (http://www.cadelit.se/cover.mp4)
Liked! :D
Fredrik Emilsson
25-02-2013, 10:02 PM
First diff covers sent.
If you want to order or have any questions regarding the new version, send an e-mail to:
emilssonfredrik[@]hotmail.com
New version fits both 37T and 39T pulleys, gear och ball diff, standard or upgrade version of 511 chassi.
Front and rear diff short diff cover available.
Fredrik Emilsson
10-03-2013, 10:36 PM
I tried to set up a business account on Ebay to make it easier to order, but they suspended the account as well as my private account.
Thank you for that.
djmcnz
11-03-2013, 12:28 AM
Gulp! :cry:
Doesn't affect previous orders does it... :eh?:
Fredrik Emilsson
11-03-2013, 09:19 AM
No worries, doesīnt affect anything.
Just wanted to make it easier to find my parts, thatīs all.
Fredrik Emilsson
14-03-2013, 09:04 PM
Now only have a few updated diff covers left in stock.
If you want some, send me an e-mail. emilssonfredrik[@]hotmail.com
ralphee
16-03-2013, 11:21 AM
Parts landed, new towers are lovely, thanks Frederik, a pleasure!
lee
djmcnz
17-03-2013, 10:20 AM
Diff covers arrived in good order, thanks Fredrik.
Hopefully get them installed today but it's reasonably warm out so it may need to wait.
Fredrik Emilsson
17-03-2013, 03:49 PM
Thanks guys!
Nice to hear that you like them.
This is one of the reasons I do this, there are so many nice people out there. :)
Thanks again!
djmcnz
17-03-2013, 11:24 PM
Thanks guys!
Nice to hear that you like them.
This is one of the reasons I do this, there are so many nice people out there. :)
Thanks again!
No problem. I like the design (I had the original long ones previously) and the interchangeable left/right belt setup.
I had to shave about 1-1.5mm off the top of the front upper cover to allow the shock tower to clear but that was easy and there's heaps of material up there so no worries.
Note to all - ream out the screw holes before you mount - I didn't and cracked a piece. My bad and no major problem but at least it can be a lesson for you all. ;)
Pics tomorrow.
Edit: so of course one needs to disassemble to install these and I took the opportunity to check and rebuild my diffs (as I need to drop the front gear diff down to 7k from 10k). Both front and rear were really quite dirty and that's after 8 packs with compressed air blown through them before each run (hard pack track, astro track and some grass/snow bashing as well). Basically the stock setup is ridiculously exposed. You need these covers.
Fredrik Emilsson
18-03-2013, 03:16 PM
Thanks for feedback!
What shock tower are you using?
I have tried both original and my new ones and it fits like a glove.
The upper cover is same as old cover and I never heard that cover is to high.
Did you get the upper cover in place properly?
Tip is to not overtighten screws or maybe not use at all.
djmcnz
18-03-2013, 08:24 PM
Thanks for feedback!
What shock tower are you using?
I have tried both original and my new ones and it fits like a glove.
The upper cover is same as old cover and I never heard that cover is to high.
Did you get the upper cover in place properly?
Tip is to not overtighten screws or maybe not use at all.
No problem, I'm using the stock suspension components. In retrospect it was probably closer to 0.8mm. It was only where the carbon tower protrudes below the alloy. I noticed that the upper bulkhead didn't sit flush, shaved a tiny bit off the top cover and fits perfectly. I did make sure that both upper and lower covers were seated and engaged correctly before I started shaving. :)
See pic 1, that's after taking some off.
I haven't taken the tower off the bulkhead for ? years?? So it may have sagged on the screws a little. Either way it was no problem - I may even cut a grove aligned with the tower in the cover at some point to provide a little more clearance in the event of a roll-over impact.
I'm delighted with these, don't get me wrong! :thumbsup:
Come to think of it, would you consider doing a carbon lipo battery tray that accommodates centre weights for the 511 w/upgrade kit (511.1?)... ? It could actually be one piece of CF. I miss your old LiPo holders, the new stock plastic ones suck.
https://dl.dropbox.com/u/10492238/Radio%20Control/TRF511/Diff%20Covers/DiffCoverFront01%20%28800%29.JPG
https://dl.dropbox.com/u/10492238/Radio%20Control/TRF511/Diff%20Covers/DiffCoverFront02%20%28800%29.JPG
https://dl.dropbox.com/u/10492238/Radio%20Control/TRF511/Diff%20Covers/DiffCoverRear01%20%28800%29.JPG
https://dl.dropbox.com/u/10492238/Radio%20Control/TRF511/Diff%20Covers/DiffCoverRear02%20%28800%29.JPG
:wub
Fredrik Emilsson
18-03-2013, 09:14 PM
No worries, I was only a bit surprised that you had to shave of some material.
Could be that inner radius on shock tower differ a bit.
Looks great anyway!:)
I have a new lipo tray in the making. It will be a bit different, not exactly like the old one. Not like any other tray out there actually.
And hopefully better than the plastic parts.:)
djmcnz
18-03-2013, 10:31 PM
I have a new lipo tray in the making. It will be a bit different, not exactly like the old one. Not like any other tray out there actually.
And hopefully better than the plastic parts.:)
Wicked, count me in! And since you're in the privileged position of having your own personal thread on oOple make sure to keep us posted here were we'll be watching! ;)
Fredrik Emilsson
22-03-2013, 08:28 AM
Now only 6 rear diff covers and 1 front left in stock.
xfactor
30-03-2013, 06:55 PM
Diff covers front and rear turned up for upgrade kit, FANTASTIC job Freddie they fit perfect,no mods needed and look great too.Excellent job :D
rcaddict
30-06-2013, 03:58 AM
I bought my diff covers from Fred last year. They are the first batch made to accommodate the new gear diff upgrade, but before we knew anything about the 84315 upgrade set. Will they work with the upgrade set as the short video suggests simply by flipping them around, or do I have to buy an updated set now? :confused:
I ask this question because I have the 511 upgrade set on its way to me now and it would be nice to know what I need to do beforehand.
If I have to buy another set of diff covers to make it all work I will do just that. I appreciate the info.
Thanks Fred! :thumbsup:
rcaddict
10-02-2014, 07:43 PM
I guess I should change my question for Fred now that the TRF503 has been announced.
It looks like we are going to need dust covers again Fred.
Am I right or wrong? :D
Fredrik Emilsson
11-02-2014, 08:25 AM
Will start racing again this year and will of course run the 503.
My son will run my 511. :)
So I will probably make some new covers etc for the 503.
Also have some other projects that I haventīhad the time to finish.;)
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.