PDA

View Full Version : Schumacher SupaStox GT12


Chequered Flag Racing
11-04-2012, 03:02 PM
See here

http://www.racing-cars.com/pp/Car_Showroom/SupaStox.html

DCM
11-04-2012, 04:28 PM
I think I shall be ordering one of them!!!

Chequered Flag Racing
12-04-2012, 09:39 AM
Is it availble yet?

RedRC say end of April, can't see that on Schumacher site though :confused:

DCM
12-04-2012, 10:46 AM
I been badgering them for months over it and been told April, got to find out if they are going to do a diff for it though.

spud31
12-04-2012, 10:50 AM
Rep told us the mardave diff fits

mark christopher
12-04-2012, 12:42 PM
you were too slow glen :D http://www.oople.com/forums/showthread.php?t=98352

Chequered Flag Racing
12-04-2012, 12:54 PM
you were too slow glen :D http://www.oople.com/forums/showthread.php?t=98352

I was driving a Mardave :woot: :lol:

saw your post just after I posted here, think there was less than 5 mins between posts

Chequered Flag Racing
12-04-2012, 01:06 PM
says on the web site Adjustable Front and Rear Ride Height

is this via shims under the front arms & rear pod?

sunbeam
12-04-2012, 01:28 PM
I think the Mardave may well be dead as of about now ?

DCM
12-04-2012, 03:31 PM
Not really, Mardave have a very strong following, I would think this would bring new life into the class.,

sunbeam
12-04-2012, 07:28 PM
Personally, I can't see any right minded person buying a Mardave over a Schumacher. I'm sure the Schumacher will be the better car, it looks better without even turning a wheel.

I can see a glut of Mardaves going onto Ebay (maybe even mine!) I guess it will be down to the BRCA at the end of the day ??

I wounder what the Mardave responce will be to this car ??

mark christopher
12-04-2012, 07:35 PM
Personally, I can't see any right minded person buying a Mardave over a Schumacher. I'm sure the Schumacher will be the better car, it looks better without even turning a wheel.

I can see a glut of Mardaves going onto Ebay (maybe even mine!) I guess it will be down to the BRCA at the end of the day ??

I wounder what the Mardave responce will be to this car ??

from another forum it would apear that the schumacher is legal to compete and can do so

stegger
12-04-2012, 08:53 PM
Competition is good, as said, having another car in the class can only make the class stronger.

I like Mardave, I like Schumacher. But which is best ? There's only one way to find out !!!!!................:thumbsup:

Chequered Flag Racing
12-04-2012, 09:16 PM
from another forum it would apear that the schumacher is legal to compete and can do so

ditto from another forum

One make series for the SupaStox or Mardave?

The essence of it is that a set of Construction Rules exist that allow any manufacturer to make a car that fits those Rules. It does not mean that all new cars have to be tested and if they are faster, rejected. The first proposal is that GT12 become a one-make class and that the Committee be empowered to make a contract with one manufacturer to embody that class with stability of specification, cost limit, etc. for a period of something like three years. That would mean that there is one car, one spec and very few mods.

oakey4
13-04-2012, 12:48 PM
for me the Mardave wins hands down, would never think of getting a schumacher, but thats my thoughts.

sunbeam
13-04-2012, 07:39 PM
for me the Mardave wins hands down, would never think of getting a schumacher, but thats my thoughts.

Why do you think that ?

jaythewarrior
15-04-2012, 11:33 AM
Car looks good, but will choose a Mardave, and before someone asks why?> because mardave is a mardave. this shuey car looks like a 12th pan with shorter rear wheels. no doubt it might out perform a Dave, but it should have its own class, if you ask me its too much time spent on car that already exists, i could put a Mardave axel in my CRC and call it a 12th superstox. i'm quite diassapointed in Schumacher, they give us great stuff and new thinking but this seems like a 12 year old boy who just copied his mate on a maths test at school. (cough BMI 12th)

Dave Dodd
15-04-2012, 07:26 PM
Car looks good, but will choose a Mardave, and before someone asks why?> because mardave is a mardave. this shuey car looks like a 12th pan with shorter rear wheels. no doubt it might out perform a Dave, but it should have its own class, if you ask me its too much time spent on car that already exists, i could put a Mardave axel in my CRC and call it a 12th superstox. i'm quite diassapointed in Schumacher, they give us great stuff and new thinking but this seems like a 12 year old boy who just copied his mate on a maths test at school. (cough BMI 12th)

tbh most companies copy each other to a certain extent..
to me the mardaves just remind me of the good old days when they were chucked together in the shed, schumacher have just brought it up to date ..

Personnally i like the new superstox :D
tempted to get one for next winter to race against tamiya m06's and put a ford anglia shell on it :thumbsup:

mark christopher
15-04-2012, 07:42 PM
Car looks good, but will choose a Mardave, and before someone asks why?> because mardave is a mardave. this shuey car looks like a 12th pan with shorter rear wheels. no doubt it might out perform a Dave, but it should have its own class, if you ask me its too much time spent on car that already exists, i could put a Mardave axel in my CRC and call it a 12th superstox. i'm quite diassapointed in Schumacher, they give us great stuff and new thinking but this seems like a 12 year old boy who just copied his mate on a maths test at school. (cough BMI 12th)
:confused::confused::confused:
so this does not look like a pan car?

http://s4db7d0eddc5f2.img.gostorego.com/802754/cdn/media/s4db7d0eddc5f2/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/1/_/1.jpg

dont see why both can not run side by side, hell how many 2wd buggies are now mid motor!!

jaythewarrior
15-04-2012, 07:56 PM
Oh dont get me wrong the Shuey Car looks great, and yeah the dave does have a pancar style to it. i think the Shuey will out perform the Daves, i think thats the reason it shouldnt run together, it getting its out class i believe from what i here. it just seems to be trying to hard for a simple class of racing.

Paulnuneaton
18-04-2012, 12:45 PM
Car looks good, but will choose a Mardave, and before someone asks why?> because mardave is a mardave. this shuey car looks like a 12th pan with shorter rear wheels. no doubt it might out perform a Dave, but it should have its own class, if you ask me its too much time spent on car that already exists, i could put a Mardave axel in my CRC and call it a 12th superstox. i'm quite diassapointed in Schumacher, they give us great stuff and new thinking but this seems like a 12 year old boy who just copied his mate on a maths test at school. (cough BMI 12th)

you was told it was on its way

Chequered Flag Racing
19-04-2012, 12:09 PM
6 cell / 2s version on redrc
http://www.redrc.net/2012/04/schumacher-supastox-6-cell2s-saddle-version/

mark christopher
21-04-2012, 08:23 PM
The meeting voted for Construction Rules, and there were some small modifications. We added Rules to allow a 2S/21.5 class, and decided not to run that at Nationals. It gives the Clubs something to use. Many thanks to James Garrett for probably the best presentation of a rule proposal we have ever seen! Although there are valid reservations about using it at National level as an equivalent to the brushed and brushless motors with 4-cell and 1S respectively, we will be working (James and I, with others) to set something out that will give it legs for the Clubs.

We have two classes - GT12.1 based on kits costing less than £100 allowing hop-ups and home-made parts, and GT12.2 based on kits costing less than £100 with nothing allowed that is not in the kit, no carbon and no diffs. Drivers can choose which one they want to enter, but not both on the same race day.

GT12.1 kits can include carbon-fibre parts providing they are included in the kit and the kit costs less than £100. Diffs and other hop-ups are allowed, and parts can be modified and have home-made bits added. It's like GT12 racing on the same basis as 12th Circuit, with the exception of the kit price limit and that carbon parts are only those sold with the kit. GT12.2 kits must cost less than £100, contain no carbon parts or a diff, and have to be raced kit-standard without hop-ups or home-made parts - run what's in the box.

Both classes can use either G2-2010/4.8v or 13.5/1S combos at Nationals. Motors and batteries from the BRCA lists for 13.5/1S. There's a few bits of tidying up to do on individual dimensions, including wing sizes. Both GT12.1 and GT12.2 will run in the same heats, no separate heats for these classes at present. We've made provision for them to be split up when entries go over 20.

Bodyshells will be approved by the Committee and can be picked from a list. The old 12th body Rules will apply - must be a realistic representation of a GT car - and we will be working with all the body manufacturer's on that.

James Garrett will be the GT12 rep on the Committee. Give James and me a couple of weeks to straighten out all the Rules and then they will go up on the BRCA website.

Thank you everyone who has helped shape these Rules, and especially to those who attended the meeting today and worked so well together to get a set of Rules that were passed by good majorities in every case. This isn't the end, it is only the beginning. If we've got something really wrong, we'll put it right with the consent of the drivers during the season. As the years roll by, I feel sure that these Rules will evolve to reflect what the drivers want to do with new ideas and new technologies, as well as keeping the competition close and fun.

owen86
27-04-2012, 08:38 AM
fingers crossed these should be arriving today :)

Slinga
27-04-2012, 09:41 AM
Received mine an hour ago :P

qatmix
27-04-2012, 09:52 AM
So just before I decide which to get. Looking at the rules the Schumacher will not be allowed to have a diff in circuit (As the kit costs £99.99 with no diff), and the £99 mardave carbon ce is allowed to run a diff? (As chris has changed the rrp).

mark christopher
27-04-2012, 10:10 AM
So just before I decide which to get. Looking at the rules the Schumacher will not be allowed to have a diff in circuit (As the kit costs £99.99 with no diff), and the £99 mardave carbon ce is allowed to run a diff? (As chris has changed the rrp).


then re read the rules i posted

GT12.1 kits can include carbon-fibre parts providing they are included in the kit and the kit costs less than £100. Diffs and other hop-ups are allowed, and parts can be modified and have home-made bits added. It's like GT12 racing on the same basis as 12th Circuit, with the exception of the kit price limit and that carbon parts are only those sold with the kit. GT12.2 kits must cost less than £100, contain no carbon parts or a diff, and have to be raced kit-standard without hop-ups or home-made parts - run what's in the box.

jonathan may
27-04-2012, 10:10 AM
if i get a schumacher and run it stock what class does it fall into

mark christopher
27-04-2012, 11:01 AM
if i get a schumacher and run it stock what class does it fall into
you can race in either class with a stock car

qatmix
27-04-2012, 11:26 AM
So Can I race a Mardave CE carbon in the 12.2 stock class, as the diff and carbon is in the Kit for £99.

rcdunk
27-04-2012, 12:38 PM
So Can I race a Mardave CE carbon in the 12.2 stock class, as the diff and carbon is in the Kit for £99.

as I read it no you cannot as it says gt12.2 must cost less than £100, contain no carbon parts or a diff

so as I understand it regardeless of the fact that it costs under £100 and comes with a diff and a carbon chassis it's not allowed in gt12.2 as it has a diff and carbon chassis

I am guessing that the supastox is allowed in both classes as it has an s1 chassis not carbon
also by looking at the rules unless they throw it into the kit there wont be a supastox carbon chassis (good mean's I wont be tempted by my carbon fetish lol)

going to hobbyshop today to see if they have arrived fingers crossed lol

jonathan may
27-04-2012, 02:59 PM
picking up mine to day from action model centre (AMC)

qatmix
27-04-2012, 03:40 PM
If thats the case you cant run either as the CE and Superstox have carbon fibre chassis (or versions there off).

Confused

as I read it no you cannot as it says gt12.2 must cost less than £100, contain no carbon parts or a diff

so as I understand it regardeless of the fact that it costs under £100 and comes with a diff and a carbon chassis it's not allowed in gt12.2 as it has a diff and carbon chassis

I am guessing that the supastox is allowed in both classes as it has an s1 chassis not carbon
also by looking at the rules unless they throw it into the kit there wont be a supastox carbon chassis (good mean's I wont be tempted by my carbon fetish lol)

going to hobbyshop today to see if they have arrived fingers crossed lol

stegger
27-04-2012, 03:52 PM
If thats the case you cant run either as the CE and Superstox have carbon fibre chassis (or versions there off).

Confused


READ THE RULES !!! The Superstox isn't carbon it's S1 :woot:

mark christopher
27-04-2012, 05:27 PM
So Can I race a Mardave CE carbon in the 12.2 stock class, as the diff and carbon is in the Kit for £99.
NO it has a carbon chassis and diff 12.1 only
If thats the case you cant run either as the CE and Superstox have carbon fibre chassis (or versions there off).

Confused

wrong schumacher is S1 NOT carbon
READ THE RULES !!! The Superstox isn't carbon it's S1 :woot:

bloody good advice :thumbsup:

TOMO WEF
27-04-2012, 10:16 PM
The s1 is a carbon fibre composite I am affraid as the advert from Schumacher’s own website states. So the Mardave is also actually not full carbon fibre either with grp in the centre of the carbon sandwich.
Does this mean neither car is legal?

http://www.racing-cars.com/main.asp?sitepages=mi35
"The Mi3.5 also offers you more choice, from the awesomely specified Mi3.5 PRO with full carbon fibre and titanium, available in 5 or 6 cell versions or the more durable Mi3.5 RACE (6 cell) using Schumacher’s famous S1 carbon composite material."

I am just trying to get some clarity for my local club as we would like to run to the brca handbook rules. So any guidance would be appreciated.

mark christopher
27-04-2012, 10:39 PM
One is sold as carbon fibre chassis, one is sold as s1

Example a manufactures carbon composite wishbones are not made of carbon fibre

TOMO WEF
28-04-2012, 06:22 AM
Ah cool so the s1 wishbones are moulded composite. Is the stox chassis moulded composite also? If not then its not "s1" it would have to be one or the other as if the two are both sold as s1 but are both different in make up then how can they both be s1?.
S1 may well just be a Marketing name for carbon fibre?
If so then Mardave could call their chassis cegrp and it would then be legal as its not sold as carbon fibre? Or even another party could make chassis out of whatever they wish but call it something else and it then be legal?

MattW
28-04-2012, 08:20 AM
The S1 material is a long way from being carbon fibre.

Cruise
28-04-2012, 09:00 AM
For clarification:

Carbon Composite. this term is normally used far a thermoplastic with an amount of carbon fibers ( as in B4 carbon vs. plastic chassis)

S1 is Schumachers name for a black glassfiber polyresin composite " glassfiber"
the black color gives it s somewhat " carbonfiber look"

the term Carbon fiber is used for the carbonfiber polyresin composite ( that shiny woven stuff that we all like but is expensive)

Cruise

TOMO WEF
28-04-2012, 09:19 AM
I just would like to see both cars allowed to race exactly as they are.
The Mardave chassis isnt strictly speaking carbon fibre with the majority of the ce plate being glass fibre. It just makes a class built on simplicity much more complicated than it ever needs to be.

mark christopher
28-04-2012, 09:34 AM
i was just going to post you must be a mardave racer, maybe stock car oval? :woot:

TOMO WEF
28-04-2012, 10:31 AM
Neither actually. I have raced mardaves (and a schumacer sst) over the years as have most racers. I help run a club and I support racing as a whole rather than any single parties interests.
Just don't see how anyone is gaining anything from excluding cars and potential racers.
If the grumpy and stereotyped response from mark is what you get for asking a genuine question from someone wanting some help and info is a measure of how helpful and open this series would be to a beginner or an old racer then I feel it may not succeed in bringing new blood in. It will be the same old racers who will have been doing it for 20years.

mark christopher
28-04-2012, 10:37 AM
Neither actually. I have raced mardaves (and a schumacer sst) over the years as have most racers. I help run a club and I support racing as a whole rather than any single parties interests.
Just don't see how anyone is gaining anything from excluding cars and potential racers.
If the grumpy and stereotyped response from mark is what you get for asking a genuine question from someone wanting some help and info is a measure of how helpful and open this series would be to a beginner or an old racer then I feel it may not succeed in bringing new blood in. It will be the same old racers who will have been doing it for 20years.

its not a crumpy responce, i have allways been in favour of running both side by side, and they can in gt.1, however mardave also make a car that can still compete in gt.2 so there is no issue

as a club you do not need to follow the rules made by the brca, so why not adopt gt.1 where both cars run side by side weather box kit or modified? but then is somone buys a carbon chassis as an option at your club, are you really going to not let them race? now that would be grumpy!!

TOMO WEF
28-04-2012, 10:55 AM
I am aware of this. To be honest I think it will be easier for our club to stay a very freestyle place to race and let people choose. At club level the driver will make more of a difference than the car.
I do fancy a schumacher in addition to a Mardave and play with them both.
The Schumacher would be great in the m-chassis rwd class if you could put some
Rubber Tyres on it, would be a good market for it in the far east and in the spc in this country.

mark christopher
28-04-2012, 11:10 AM
i believe there are rubber tyres in the workings......

jonathan may
28-04-2012, 11:57 AM
do 12th size servos fit as well i have fitted a 1oth savox servo

mardave_77
28-04-2012, 12:52 PM
any one had a go with one yet!!i know there have only been out for a day but i also know some one will have
come on let us all know

terry.sc
28-04-2012, 04:28 PM
wrong schumacher is S1 NOT carbon
One is sold as carbon fibre chassis, one is sold as s1
The S1 material is a long way from being carbon fibre.

It would help if any of your replies would have stated what S1 actually is, not described what it isn't. Schumacher could sell carbon fibre chassis as C1 material, doesn't mean it's no longer carbon fibre because they have changed the name.
Example a manufactures carbon composite wishbones are not made of carbon fibreJust to correct you Mark, carbon composite wishbones are made of nylon reinforced by chopped strand carbon fibres, so yes they are made of carbon fibre. Just because it isn't in woven sheets doesn't make a difference, if it did then you could cheat by using chopped strand carbon in your chassis plates because it's no longer the woven sheet material chassis are usually made from.



As Cruise said above, S1 is just Schumachers fancy name for fibreglass sheet, it just looks black because they use a black pigment in the resin when making the sheets. There is no carbon fibre in normal S1 parts, S1 isn't a carbon/glass mix. To confirm this, the best people to ask are Schumacher themselves and the only definite answer would be to email them rather than asking on a forum. S1 is just flat sheet, it isn't used in moulded parts.

The s1 is a carbon fibre composite I am affraid as the advert from Schumacher’s own website states.

http://www.racing-cars.com/main.asp?sitepages=mi35
"The Mi3.5 also offers you more choice, from the awesomely specified Mi3.5 PRO with full carbon fibre and titanium, available in 5 or 6 cell versions or the more durable Mi3.5 RACE (6 cell) using Schumacher’s famous S1 carbon composite material."

This is a confusing mess of a description, unless Schumacher have started making a special carbon skinned version of S1 for their touring cars. The description should read "Schumacher's famous S1 composite material", their way hiding it's just fibreglass. It also relates to a different car than the Superstox, so there is a chance they are making a different material for the touring cars than they are using on other chassis. Again, the people to ask are Schumacher themselves.

As for Marks grumpy replies, well if you want a confusing unclear answer, Mark is usually the one to ask.:lol:

mark christopher
28-04-2012, 04:41 PM
It would help if any of your replies would have stated what S1 actually is, not described what it isn't. Schumacher could sell carbon fibre chassis as C1 material, doesn't mean it's no longer carbon fibre because they have changed the name.
Just to correct you Mark, carbon composite wishbones are made of nylon reinforced by chopped strand carbon fibres, so yes they are made of carbon fibre. Just because it isn't in woven sheets doesn't make a difference, if it did then you could cheat by using chopped strand carbon in your chassis plates because it's no longer the woven sheet material chassis are usually made from.




As for Marks grumpy replies, well if you want a confusing unclear answer, Mark is usually the one to ask.:lol:

grumpy confusing comment coming :thumbsup:

there not carbon fibre, they are composite as you have even put..... it they were carbon fibre arms, the manufactures would claim that!:eh?:

neallewis
28-04-2012, 10:30 PM
Great first outing from the Schumacher at YMRC tonight. Win in the A final from Bally of MB Models in a close race. It certainly got people talking ;-)

jonathan may
28-04-2012, 10:54 PM
anyone know if a 12th servo fits

andyr
29-04-2012, 01:53 PM
anyone no if you can get hold of a blank pdf set up sheet yet

MattW
29-04-2012, 02:23 PM
I don't believe it's up on the web site yet, but there is one in existence.

mark christopher
29-04-2012, 07:43 PM
anyone know if a 12th servo fits

looks like it would though you may need a different servo post

bally
29-04-2012, 08:11 PM
anyone know if a 12th servo fits

as Mark has said yes a 12th servo will fit but you will need to drill the chassis or change one of the posts.

Slinga
29-04-2012, 10:07 PM
no need to drill the chassis as there are already holes there for the 12th size servo

you will just need servo posts

lardy37
29-04-2012, 11:20 PM
well having now seen a superstox up close today for the first time and also having bought my son an mi1 tc they are both stated as having s1 composite chassis and trust me its not ust a name covering up something they are NOT CARBON FIBRE they are what they say they are a tough composite chassis so called s1 probably for schumacher1 and if they redesign the composite it will probably be called s2 that said it does look good :thumbsup:

morpheus2010
01-05-2012, 10:56 AM
Clapped my eyes on a Superstox G12 last night, Trial run at Blackpool Indoor Club :drool:

Motor/ESC was with Mtroniks Mardave Racing G2 Brushless System.

Setup was as kit and Paul the owner/driver was very pleased with how it went, smooth, quite quick and very drivable without having to spend a lot of time tweaking.

Was about to get a Mardave V12 but this is in a class of its own regarding design and construction but affordable. :thumbsup:

CrashBangWallop
01-05-2012, 12:16 PM
Going to give mine a go tonight for the first time. It is a quality piece of kit that shoud run well straight from the box. Only gripe - does not come with front wheel bearings, only plastic bushes.
Running 2cell Lipo ( 1cell case ), Atom and G2 brushed motor should go like stink or catch fire ! !

mark christopher
01-05-2012, 02:18 PM
if using on circuits try removing the orings from the links, you may be pleasently suprized :D:thumbsup:

Karl Dransfield
01-05-2012, 08:50 PM
if using on circuits try removing the orings from the links, you may be pleasently suprized :D:thumbsup:

I can only see this being an advantage on low grip tight circuits. Otherwise all it is likely to do is make the car grip roll.

morpheus2010
02-05-2012, 01:30 PM
anyone no if you can get hold of a blank pdf set up sheet yet

Get the setup sheets here http://www.racing-cars.com/search.asp?category=Tech%20Info&subcatid=319&searchbox7=SupaStox&templateid=23&sortname1=prodvalue14 :)

Chequered Flag Racing
02-05-2012, 02:37 PM
Get the setup sheets here http://www.racing-cars.com/search.asp?category=Tech%20Info&subcatid=319&searchbox7=SupaStox&templateid=23&sortname1=prodvalue14 :)

Wonder if the CA is a special they are going to launch or just his setup

Karl Dransfield
03-05-2012, 11:06 PM
Pictures of my Supastox circuit car. Still got some work to do on it. Can't wait to give it a run!
http://i.imgur.com/9XWHX.jpg?1http://i.imgur.com/fc6HX.jpg?1
http://i.imgur.com/9EXpI.jpg?1

neallewis
04-05-2012, 01:11 PM
Wonder if the CA is a special they are going to launch or just his setup

I think it's just a setup sheet. The key point is that he has removed the red o-rings from the top and side rear suspension links.

I've not got or built mine yet, but will do later this weekend. From what I understand, the car only starts to perform properly on a circuit with the o-rings removed.

Chequered Flag Racing
04-05-2012, 01:26 PM
Pictures of my Supastox circuit car. Still got some work to do on it.



Like a black servo saver and black wheels with LB foams on ;)

rcdunk
04-05-2012, 06:07 PM
car looks great what servo you using ?

Karl Dransfield
04-05-2012, 08:50 PM
Like a black servo saver and black wheels with LB foams on ;)

When I said "still got some work to do", that's what I meant ;)

Karl Dransfield
04-05-2012, 08:51 PM
car looks great what servo you using ?

Cheers :) the servo is a Futaba BLS551.

Slinga
05-05-2012, 08:27 PM
here's a few pics of my Supastox
built it as per kit, apart from the rear springs, which i put one hole out, i just wasn't convinced by the idea of them right in the centre, suppose i should have tried it first, but oh well

gave it it's first run last night, and it was planted :thumbsup:

was running it back to back with my dave to try and compare them, but my dave just wasn't handling well last night, couldn't find anything wrong with it, poss the tyres getting low, just didn't want to handle well
i guess it got the ump over me getting it's competitor lol

http://i164.photobucket.com/albums/u29/slinga1985/supastox/IMG_2115.jpg
http://i164.photobucket.com/albums/u29/slinga1985/supastox/IMG_2116.jpg
http://i164.photobucket.com/albums/u29/slinga1985/supastox/IMG_2117.jpg
http://i164.photobucket.com/albums/u29/slinga1985/supastox/IMG_2118.jpg

mark christopher
05-05-2012, 09:34 PM
what are your light decals from?

Slinga
06-05-2012, 10:47 PM
the light decals are from TicRacing and are designed for this shell

you can find them HERE (http://www.mardavespares.com/body-shells-and-accessories/decals-masking-tape/speed-6-lights-grills)

General Accident
07-05-2012, 10:59 PM
New to this 12th scale stuff so would appreciate advice on what pinion I should start with on a 20t cheapy brushed motor?

morpheus2010
10-05-2012, 05:47 PM
Slinga, Can you tell me what the body shell is and did you get it painted, If so by who?
Planning on getting one :wub of these as soon as the local club allows them to race against the Dave. (The're still deciding on G2 or 1s brushless setups) and Dave only at the mo :thumbdown:

Spoolio
10-05-2012, 06:17 PM
here's a few pics of my Supastox
built it as per kit, apart from the rear springs, which i put one hole out, i just wasn't convinced by the idea of them right in the centre, suppose i should have tried it first, but oh well

gave it it's first run last night, and it was planted :thumbsup:

was running it back to back with my dave to try and compare them, but my dave just wasn't handling well last night, couldn't find anything wrong with it, poss the tyres getting low, just didn't want to handle well
i guess it got the ump over me getting it's competitor lol

http://i164.photobucket.com/albums/u29/slinga1985/supastox/IMG_2115.jpg
http://i164.photobucket.com/albums/u29/slinga1985/supastox/IMG_2116.jpg
http://i164.photobucket.com/albums/u29/slinga1985/supastox/IMG_2117.jpg
http://i164.photobucket.com/albums/u29/slinga1985/supastox/IMG_2118.jpg

:thumbsup: likey.

Spoolio
10-05-2012, 06:22 PM
I think it's just a setup sheet. The key point is that he has removed the red o-rings from the top and side rear suspension links.

I've not got or built mine yet, but will do later this weekend. From what I understand, the car only starts to perform properly on a circuit with the o-rings removed.

? Is that 'cos it frees up the movement of the rear pod and allows more roll to compensate for the lack of a diff? If not what's the reasoning behind this?

mark christopher
10-05-2012, 08:49 PM
it allows the pod to keep level (both tyres on the track) with less roll resistance on the chassis, which in turn puts more weight on the outside front wheel

Slinga
12-05-2012, 04:29 PM
Slinga, Can you tell me what the body shell is and did you get it painted, If so by who?
Planning on getting one :wub of these as soon as the local club allows them to race against the Dave. (The're still deciding on G2 or 1s brushless setups) and Dave only at the mo :thumbdown:

hey morpheus

the body is from kamtec models and is just known as the touring shell based on a speed 6

looks like schumacher sell them too... or a version that looks the same known as "SupaStox Touring Type M6" partnumber G894

as for the paint, i did it myself :)

morpheus2010
14-05-2012, 10:17 AM
Ta for the info, and I do like the paint job :thumbsup:

Going to get a superstox for winter racing. Its a well engineered car at a good price.

Chequered Flag Racing
14-05-2012, 10:24 AM
GT12 Circuit Cars on Facebook (https://www.facebook.com/groups/336445139755237/#!/groups/336445139755237/) :thumbsup:

Mossy
20-05-2012, 11:59 AM
Is there anywhere that races these close to Birmingham in the week? After speaking to robin last weekend might well get one...

Chequered Flag Racing
26-05-2012, 12:05 PM
SupaStox Diff

from what Dan was saying on FB

Robin said, that it wasnt part on the main project because they didnt think diffs would be aloud in the BRCA rules, but as it was desided at AGM they started work

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/537540_10150952083297423_772351386_n.jpg

spud31
29-05-2012, 03:45 PM
How do you de tweak a superstox please as mine seem to want to do donuts all the time when getting towards full power?

Thanks

neallewis
29-05-2012, 04:26 PM
How do you de tweak a superstox please as mine seem to want to do donuts all the time when getting towards full power?

Thanks

What surface are you running on?

spud31
29-05-2012, 05:36 PM
Tested on tarmac will be raced on tarmac

smarkham
29-05-2012, 05:44 PM
Running boosted by any chance ?

spud31
29-05-2012, 09:00 PM
not that i know off tbh, will be raced on carpet

neallewis
29-05-2012, 09:22 PM
Tested on tarmac will be raced on tarmac

I've only run on carpet, with the kit tyres, and had loads of traction. It was turning in faster than I anticipated initially, but I dialed it out with EPA and a little exponential on the steering. once that was done, it was running great. I'm running no o-rings on the pod links, rear yellow springs on the middle holes. I used green front springs, but I may swap back to blues next event.

I suspect you need to get the tyres right for the track surface, then tune the handling.

morpheus2010
30-05-2012, 03:44 PM
Softer tyre compound and/or tyre additive ( if allowed ) will help tyres grip. Front/Rear weight balance can be a factor.

Sharp turn in under power can produce oversteer. Dial down EPA and if you can reduce steering rate

Mr Eccleston
04-06-2012, 10:51 AM
These cars look pretty strong, has anyone found out any common parts that break yet, just looking for some advice on what parts to carry.

stegger
04-06-2012, 12:39 PM
I've only seen spur gears go (48dp) car is very strong ;)

andyr
05-06-2012, 07:18 AM
same with me only done a 48dp gear to be fair tho it was the motor that moved

TOMO WEF
05-06-2012, 07:02 PM
I think some of the saloon stox racers have had some issues with breakages.
Circuit racing I don't think there have been too many issues unless it's been a big shunt.

woody_woody
20-06-2012, 11:40 PM
I think some of the saloon stox racers have had some issues with breakages.
Circuit racing I don't think there have been too many issues unless it's been a big shunt.
mine has took some pretty hard knocks , no issuses with breakages , only motor moved an narnered my spurgear but was still useable

neallewis
21-06-2012, 12:04 AM
Loose pinion and 1/2 chewed 48dp spur is all i've had go wrong. Actually running 74tooth spur, and it's picked up a lot of carpet crud and mashed the teeth before I had the pinion come loose. I'm going to switch to 70 tooth next and see if it improves. I think the schumacher spurs are soft plastic. Do any other 48dp spurs fit?

Otherwise fine apart from a few chunked kit tyres. But I had not trued them down.

mark christopher
22-06-2012, 08:04 AM
How do you de tweak a superstox please as mine seem to want to do donuts all the time when getting towards full power?

Thanks

could be your solid axle causing that on tarmac, as one wheel has to break traction mid corner

PRO-Buggy
22-06-2012, 11:24 AM
What is the difference for driving between the two chassis?
Is an 1S chassis better for circuit or is an saddle chassis better for circuit?

mark christopher
22-06-2012, 05:54 PM
i was told the 2s was meant more for oval classes

Chequered Flag Racing
22-06-2012, 08:45 PM
SupaStox GT12 circuit racer
http://www.redrc.net/2012/04/schumacher-supastox-gt12-circuit-racer/

SupaStox 6 Cell/2S saddle version
http://www.redrc.net/2012/04/schumacher-supastox-6-cell2s-saddle-version/
This version is designed for 6 NiMh cells or 2s saddle lipo’s and is mainly used for Oval racing. It includes the different battery mounting system, a 3mm chassis and different spring and tyre choice, compared to the 4 Cell/1s primarily circuit car.

PRO-Buggy
23-06-2012, 05:30 AM
Thanks for the info...

owen86
24-06-2012, 04:58 PM
New body ready for racing!

http://i128.photobucket.com/albums/p198/ocalloway/07d3e41e.jpg

http://i128.photobucket.com/albums/p198/ocalloway/92599ca7.jpg

Martyn (Bomber)
24-06-2012, 05:56 PM
Very smart, nice job :thumbsup:

RLGfx
27-06-2012, 02:24 PM
new body for me too... :D

Rattle cans FTW

Martyn (Bomber)
27-06-2012, 04:22 PM
Awesome :thumbsup:

woody_woody
27-06-2012, 07:10 PM
best thing since sliced bread when it comes to 1/12 saloon , handles great , love racing both my supastox

Chequered Flag Racing
16-07-2012, 05:43 PM
Anyone else's chassis not flat when it's all assembled?

Put a steel straight edge on mine and I can rock it front to rear by 1, 2mm. Did look at a few others and mine was not the worst but all chassis's were warpped.

So after stripping the car here's a short video of a warpped chassis. As you can see a not so flat SS chassis. Your supposed to race with this car. :o. Not impressed. This is from the 4c/1s kit and has done about 6 runs in practice not racing using 1s/13.5 to power it. Ruler is aprrox 1 to 1.5mm.

DH2eKvqF8KU

Chequered Flag Racing
16-07-2012, 07:43 PM
Put the chassis in the oven at 200c in the vain hope I may be able to flatten it. Not a chance. Nice and flexible when it came out. Put it between to plates of glass with heavy weight on it. Still has the same tweak in it. Bugger. No video this time as it'll only be a repeat :lol:

mark christopher
16-07-2012, 08:19 PM
both of mine are fine!!

lee150978
16-07-2012, 08:45 PM
Hi,

Did you try contacting Schumacher regarding the warped Chassis to see if they know of the problem?

Whenever I have had problems with parts in the past (Not very often I must add) they have been great, and often sent out replacement parts.

I certainly found I got much more information and help as a result of speaking to them direct than I suspect I would have posting about it on a forum!!

May be worth thinking about.

Chequered Flag Racing
20-07-2012, 09:09 AM
Hi,

Did you try contacting Schumacher regarding the warped Chassis to see if they know of the problem?


Nope.

Bought unused from o0ple'r who had built it but it was unused.

matdodd
20-07-2012, 08:30 PM
My chassis was fine and ive had a look at quite a few others that were built and unbuilt which were ok as well.
If you didn't build it, it's possible it got tweaked when it was built

I'd contact Schumacher and see what they say, I'm sure they will help if they can

reg
31-07-2012, 06:26 AM
can you run one saddle pack instead of a shorty lipo?

mark christopher
31-07-2012, 07:03 AM
Have found that it you do not tighten the battery tray evenly or overtighten it the chassis can get a tweak which warps the chassis, so my eyes dodgy building

Chequered Flag Racing
31-07-2012, 11:16 AM
can you run one saddle pack instead of a shorty lipo?

do you mean a saddle pack or one half of one?

if one half then yes but you'll need to find a way to stop it moving side to side when cornering

Chequered Flag Racing
31-07-2012, 11:17 AM
Have found that it you do not tighten the battery tray evenly or overtighten it the chassis can get a tweak which warps the chassis, so my eyes dodgy building

I'll mount the tray on the underside and see if it pulls it straight then before I rebuild the car.

reg
31-07-2012, 11:45 AM
do you mean a saddle pack or one half of one?

if one half then yes but you'll need to find a way to stop it moving side to side when cornering

sorry,yeah i ment half of one:blush:

thanks,ill have to do some fettling:thumbsup:

Snakes
08-05-2013, 11:08 AM
Could anyone tell me if the body shell for the Schmacher Supastox would be able to fit onto a Tamiya RM-01 chassis?
Thanks in advance.

Sumilidon
08-05-2013, 03:12 PM
Given this has been resurrected - I have just painted my first shell. Leaked a little under the tape - and is it's a basher shell - I just used whatever I had to hand (in this case, automotive paint)

Oh and when I put the car down to get my phone, I then found the dog next to it!