losi 22 mid motor setup ?

[tcboy1983]

hi i am looking at sorting out a few different setup for a mid motor losi22 on
astro at shrccc

if you could help me and also what tyres work with the setup would be great

many thanks

[jcb]

I ran the following setup on my 22 at the weekend. It was wet all day and the astro is reasonable long pile to, but no sand!!

Front
40W Losi oil
3 hole 1.45mm taper piston
green spring
Shock position middle on arm 2 on tower
2mm limiter fitted
Camber link position 2
2mm under inner ball stud 1mm on outer ball stud
Kick angle 25 degrees - brass
Caster 10 Degrees
Camber -1 deg
Ride height 20mm
Kit Spindle


Rear
32.5w Losi Oil
3 hole 1.55mm taper piston
Yellow spring
Shock position inside on arm 2 on tower
Camber link 2-E with 1mm under both ball studs
4 degree HRC
2.5 Degree anti squat
Short wheel base
Schumacher Cougar Wing
Camber -1
Ride height 20mm
Full rear weight kit - 62 grams
Saddle Lipos with no additional weight

Rear tyres Dboots Multibyte with Mr 'O' Foam Extra wide rear inserts
Schumacher mini spikes - green - Mr 'O' Foam firm insert

LRP x12 6.5
21/76 gearing



I used the same setup as above at Stotfold, on a drying astro track with the following changes

Blue front spring
Pink Rear Spring
50 Gram rear weight
1 degree anti squat
3mm spacer under rear shock tower ball stud

Schumacher Yellow Rear mini spikes and Cut Stagger fronts with standard Mr 'O' Foam inserts.

[tcboy1983]

will try the setup tomorrow thanks for the relpy mate ;)