how to stop a bouncy b44

[danny the elfman]

hey guys. Basicly my problem is when my associated b44 goes down the straight on our track, its bounces alot more bouncy than the other cars, it spends more time in the air than on the ground. What Suspension set up should i be looking at to stop it bouncing? Should i go stiffer or softer? Right now the rear has silver springs and 25wt oil, and the fronts are 35wt, green springs. Thanks for reading

[Isaac Peel]

What are other people using on your track.

[12-nitroman]

i had the same problem too but mine was noticeable over the jumps as when it landed it'd bounce lol.
i switched lighter wt shock oil at rear from stock.and fronts are stock with 35wt oil.

[Nas]

The team drivers run. 30WT in the rear and 35WT in the front.That should help the rear from bouncing about,oh and bleed the shocks correctly, so when you push the shock shaft up ( with no spring) it should come out a little, not more than 1/4.


Thanks.

[danny the elfman]

well ive had a look but i have no idea with other brands, only know associted stuff. So when i check up the setup of something like a losi or durango it just confuses me.

Edit_two replies when writing this post. Thanks guys, i'll try that and see how it goes :D

[Robocop]

What about adding more weight see rudebits for them

[ron63]

Your setup seems to be totally upside down.
I'd try

Front:
35Wt
Piston #2
1 Limiter
silver Spring

Rear:
30Wt
Piston #1
2 Limiters
green Spring

This should work..

[Mud Driver]

try this front 25wt rear 20wt its very good on bumpy tracks and softer springs also

[metalmickey0]

Thought someone would if said this before. Balance your wheels matey like they do in 1:1 cars. i do it with blue tak as the weights. Makes shed loads of difference on how smooth she runs.

[pieterke]

try this front 25wt rear 20wt its very good on bumpy tracks and softer springs also

Won't that make the suspension too soft which results in the car botomming out?

Btw how high is the ride height compared to the other drivers?

[tisher]

Thought someone would if said this before. Balance your wheels matey like they do in 1:1 cars. i do it with blue tak as the weights. Makes shed loads of difference on how smooth she runs.

I have never heard of doing this ever sounds interesting tho:)

me personally have just finally finished getting my b44.1 dialed in I am running yellow kyosho shock springs up front with 35wt oil and green ae springs rear with 27wt oil 87g lipo weight makes a huge difference I gave it a run out at our astro turf track today and it was flying. also run cut staggered on the front and nanobites on the rear the car ran very planted:)

[uijui]

I have never heard of doing this ever sounds interesting tho:)

me personally have just finally finished getting my b44.1 dialed in I am running yellow kyosho shock springs up front with 35wt oil and green ae springs rear with 27wt oil 87g lipo weight makes a huge difference I gave it a run out at our astro turf track today and it was flying. also run cut staggered on the front and nanobites on the rear the car ran very planted:)

Cut stagger front on B44.1?

[tisher]

Cut stagger front on B44.1?

yep try them they are awsome on astro:thumbsup:

[coleman758]

+1 I run them on my DEX410, Stretch them over the 4WD rim. Drives fantastic!

[Mike Parker]

hey guys. Basicly my problem is when my associated b44 goes down the straight on our track, its bounces alot more bouncy than the other cars, it spends more time in the air than on the ground. What Suspension set up should i be looking at to stop it bouncing? Should i go stiffer or softer? Right now the rear has silver springs and 25wt oil, and the fronts are 35wt, green springs. Thanks for reading

Just a quick q on this mate, what pistons are you running front & rear??

[uijui]

yep try them they are awsome on astro:thumbsup:

Faack :woot: no astro in Finland :cry:

[tisher]

Faack :woot: no astro in Finland :cry:

you will not need them then:lol: