View Full Version : 501X worlds edition brushless gearing comparisons.
Colinevan
14-04-2008, 06:50 PM
I thought id ask some advice first of all regarding my new worlds 501x and its gearing.
My old 501x ran a nvak gtb 4.5 sintered indoors and outdoors on a 96t spur and pinion range from 16 inddors to 17 - 18 outdoors. Duration was never a problem , speed was fine and temps were always good.
New 501x came with a smaller 91t spur and have started with a 15t pinion and have also tried a 16t. Tbh i couldnt really tell any difference, but after having a chat with a few other racers, they all think the pinion is way too small.
The gtb's recomended ratio is around 13.000 and that equates to a reccomended pinion of a round 14 to 15 coupled with the recomended 91t spur. Im just curios to find out what others use with a similar combo.
Thanks
Col.
werner1619
14-04-2008, 07:49 PM
Hi Coline,
After calculating you should use the 14T pinion if you require a 13:1 gear ratio. That is assuming that your new 501x has a 18T centre pulley and a 36T diff pulley??
:)
I have also had people saying I am geared wrong, the main question here is what do you want from the motor and batteries? Long run time or geared to the moon and hope it lasts 5 minutes?
:)
Manufacturer recommendations are good and should serve as a good starting point, making small adjustment should it be required.
:)
DaveG28
14-04-2008, 08:58 PM
I use 15t with a 5.5 in mine.
Have heard the way to do Novaks is to keep going bigger on pinions until its not quite thermalling at 5 mins, but not sure myself, prefer playing safe!
Spoolio
15-04-2008, 05:56 AM
That is assuming that your new 501x has a 18T centre pulley and a 36T diff pulley??
I thought the 501X WE used 37t diff pulleys like the DB01 Durga. There is a gear chart on oople somewhere.
I have a 5.5T brushless in my DB01 (91t / 18t / 37t) and ran it with a 14t. Manufacturers ratio is 13:1 and TBH it struggled with the 14, getting hot and still trying to accelerate at the end of the straight. Unfortunately a 13t wouldn't fit and so I ended up going back to a 14t and refitting the old 7.5T motor. Moral = the gearing on these cars is weird and a lot of experienced racers will tell you you are using too small a pinion when in fact if anything it may be too big!
B44&501xRacerEX
15-04-2008, 01:40 PM
The stock setup is 15/91
That should be fine for brushless shouldnt it?
I'm gonna use a Tekin Redline Brushless motor in mine with a Tekin R1 pro.
Wes a freind of mine has already used the 362 motor overgeared in a race
and did alright with his predator X10 until it broke.
Lucky I am to have the car that can beat a predator, if he doesnt get beat by B44's first...lol
chrispattinson
15-04-2008, 02:13 PM
I have been using a Novak 4.5 in my 501X for nearly one year now. It has 18T centre pulleys, 37T rear pulley, 36T front pulley.
Indoors, I run 17/96 with a diff in the front, EXP on -30 and EPA -15.
Outdoor I run 17/96 with one way, EXP on -20 and EPA on 0.
It never thermals, and is plenty fast enough. I would recommend using your transmitter settings to control the speed, end temperature of your car, aswell as your gearing, to optimise your power delivery to the track. :)
B44&501xRacerEX
15-04-2008, 07:48 PM
so I guess my 9T 362 brushless motor is fine correct for the stock gear ratio?
Seems like it.:)
vBulletin® v3.8.7, Copyright ©2000-2026, vBulletin Solutions, Inc.