PDA

View Full Version : Help with Alloy Steering Conversion


Moss Models
30-04-2012, 09:52 AM
Hi Chaps,

I have the Alloy steering conversion fitted to all three SX3's we run. My son broke the small carbon arm that is attached to the alloy arm last weekend. However I have been told that you can't buy just this little carbon plate but have to buy the whole conversion again.

This seems a little bonkers to me as well as wastefull as you will never use the spare alloy bits. Has anyone made a copy of this part or know if I can get one.

Cheers

Alex

Robocop
30-04-2012, 09:56 AM
It true you have to by the complete carbon bits i broke 3 on mine

mark christopher
30-04-2012, 10:01 AM
i made a new one from an old shock tower using my dremel

Moss Models
30-04-2012, 10:05 AM
It true you have to by the complete carbon bits i broke 3 on mine


Thats just crazy:cry:

bigred5765
30-04-2012, 10:24 AM
i 4 years of racing the cat we have broke 0 zero what the hell are you doing to break them,

mark christopher
30-04-2012, 11:03 AM
crashing broke mine :p

mw02veg
30-04-2012, 11:20 AM
Try U3446

bigred5765
30-04-2012, 12:15 PM
crashing broke mine :p

lol you animal:p
as mike said U3446 is what your after

Moss Models
30-04-2012, 12:25 PM
Cheers guys, I looked every where for that and could not find them!!

mw02veg
30-04-2012, 02:02 PM
http://www.racing-cars.com/images/Technical_info/Schumacher/Old%20Cars/CAT%20SX2/Exploded%20Diagram/catsx2_exploded_iss2_L.pdf



always helpful