PDA

View Full Version : which mini 8ight pivot block bushes to use


rondoolaa
30-04-2012, 10:19 AM
Hi,

What degree bushings do you guys recommend for use on the alloy pivot blocks on the losi mini 8ight,

Thanks for any info,

markwilliamson2001
30-04-2012, 01:47 PM
Most are using 3 deg rear toe in with between 1.5 and 2 deg anti-squat...However, front end seems to vary, but a general consesus seems to be around maximum caster (fully rear ward angle).

Hope this helps.

Mark

danmurphy
01-05-2012, 03:24 PM
I'd say try 3-4deg toe in on the rear, minimum anti squat and either 10 or 12deg castor on the front :thumbsup:

rondoolaa
05-05-2012, 09:47 PM
thanks :)